基于权函数法的应力强度因子计算和断裂评估

仅利用一个参考载荷,建立一种近似公式来计算共线裂纹和中心裂纹的张开位移。通过该方法确定的裂纹面张开位移及其偏导与精确解之间吻合良好。该方法将中心裂纹的权函数计算模型简化为形状因子和裂纹面张开位移偏导之间的积分。基于权函数法,研究了带中心裂纹的旋转叶片的应力强度因子与裂纹长度、位置、转速及转动加速度之间的关系。结果发现:应力强度因子随着裂纹长度的增加和裂纹与旋转轴间距的减小而增大;转动加速度对应力强度因子的影响较小;转速的增大会使应力强度因子增大。在断裂力学理论的基础上,建立了断裂控制准则,计算表明叶片的临界转速随着裂纹长度的增加而降低。     

Evaluation of mixed mode-I/II criteria for fatigue crack propagation using experiments and modeling

In this study, in-plane mixed mode-I/II fatigue crack growth simulations and experiments are performed for the Al 7075-T651 aluminum alloy which is widely used in the aerospace industry. Tests are carried out under different mode mixity ratios to evaluate the applicability of a fracture criterion developed in a previous study to mixed mode-I/II fatigue crack growth tests. Results obtained from the analyses and experiments are compared with existing and developed criteria in terms of crack growth lives. Compact Tension Shear (CTS) specimens, which enable mixed mode loading with loading devices under different loading angles, are used in the simulations and experiments. In an effort to model and simulate the actual conditions in the experiments, crack surfaces of fractured specimens are scanned, crack paths are modeled exactly, and contacts are defined between the contact surfaces of a specimen and the loading device for each crack propagation step in the analyses. Having computed the mixed mode stress intensity factors from the numerical analyses, propagation life cycles are predicted by existing and the developed mixed mode-I/II criteria and then compared with experimental results.     

腐蚀环境下铜薄膜传感器金属结构裂纹监测

铜薄膜传感器在飞机金属结构损伤监测过程中,将长期面临大气腐蚀环境的影响。针对此背景,研究了铜薄膜传感器在腐蚀环境下的耐蚀性能,及腐蚀后的疲劳裂纹监测性能。首先,采用脉冲偏压多弧离子镀技术在不同弧电流和基体负偏压水平下制备了一系列铜薄膜,对其耐蚀性能进行了对比研究。结果表明,在弧电流60 A和基体负偏压250 V时沉积的铜薄膜耐蚀性能最佳。然后,结合耐蚀性能最佳的沉积工艺参数,在2A12-T4铝合金中心孔板试件上制备了同心环状铜薄膜传感器阵列,并开展了盐雾腐蚀试验。最后,对腐蚀试验后的铜薄膜传感器进行了疲劳裂纹监测试验。结果表明:铜薄膜传感器在腐蚀环境下具有良好的耐蚀性能,耐蚀时间达1 000 h;腐蚀试验后的铜薄膜传感器对裂纹变化敏感,能实现对裂纹定量监测,监测精度为1 mm,监测结果具有良好的可重复性。     

Electrochemical drilling of small holes by regulating in real-time the electrolyte flowrate in multiple channels

Electrochemical drilling(ECD) provides an alternative technique for drilling multiple small holes in difficult-to-machine materials in numerous industrial applications such as for aeroengines. The value and fluctuation of electrolyte flowrate can seriously affect the machining stability and hole quality in ECD. In particular, when drilling multiple holes, the distribution and fluctuations of the electrolyte flowrate in each channel could influence the uniformity of the electrolyte flowrate among...     

直升机典型结构裂纹扩展路径模拟及分析研究

目前对于直升机上结构裂纹扩展路径预测大部分是依靠经验判断,缺乏理论数值模拟及有效的分析方法。本文基于adaqus有限元软件并结合实践经验设置初始裂纹,选取典型直升机结构进行了裂纹扩展仿真模拟,对结构加载方式、腐蚀区域以及加强槽因素等对裂纹扩展的影响进行了相关探讨研究。文章所述方法和结论对于直升机结构的裂纹扩展路径预测及损伤容限设计提供了新的思路,对工程设计有一定的改进参考意义。     

广义有限元法计算飞机开口裂纹应力强度因子

机身开口圆角损伤可能逐渐形成裂纹从而严重影响飞机使用安全,为此对圆角裂纹进行剩余强度估算显得十分重要。使用Williams位移场广义有限元法进行裂尖单元加强,并对裂尖区域应用放射形网格划分技术,编写广义有限元法的MATLAB程序,研究并计算飞机舱门开口圆角裂纹的应力强度因子。结果表明：在裂纹分析上,广义有限元法较常规有限元法具有更好的适应性和更高的精度。     

Breakthrough detection in electrochemical discharge drilling to enhance machining stability

Film cooling holes are widely used in aero-engine turbine blades. These blades feature large numbers of holes with complex angles and require a high level of surface integrity. Electrochemical discharge drilling(ECDD) combines the high efficiency of electrical discharge drilling(EDD) with high quality of electrochemical drilling(ECD). However, due to the existence of a variety of energy for material removal, accurate and timely detection of breakthroughs is fraught with difficulties. An insuffic...     

Evolutionary features of polar and non-polar coronal holes during solar cycle 24 and the rising phase of cycle 25

This paper presents the results of the analysis of the evolution of coronal holes (CHs) on the Sun during the period May 13, 2010 – March 20, 2022, covering Solar Cycle 24. Our study uses images in the extreme-ultraviolet iron line (Fe XII 193 Å) obtained with the Atmospheric Imager Assembly of the Solar Dynamics Observatory (AIA/SDO). To localize CHs and determine their areas, we used the Heliophysics Event Knowledgebase (HEK). We separate the CHs into polar and non-polar and study the evolutionary features of each group. During this period, an asymmetry between the Northern (N) and Southern (S) Hemispheres (N-S or hemispheric asymmetry) is detected both in the solar activity (SA) indices and in the localization of the maximum areas of the polar and non-polar CHs. It is shown that the hemispheric asymmetry of the areas of polar and non-polar CHs varies significantly over time and that the nature of these changes is clearly related to the SA cycle. We find that for most of the period, the polar CHs were predominated generated in the S- hemisphere while the non-polar CHs were dominant in the N- hemisphere. It is found that the maximum and minimum of the hemispheric imbalance in the areas of non-polar CHs are close in time to the maximum and minimum of the asymmetry of the SA indices (the number and areas of sunspots). The maximum hemispheric imbalance of the polar CH areas is observed at the maximum of Cycle 24, and the minimum imbalance is found at the cycle minimum. These results confirm our assumption that these two types of CHs are of a different nature and that the non-polar CHs, like sunspots, are elements of the general magnetic activity.     

晶体塑性模型及其在金属疲劳寿命预测中的应用

作为细观尺度上描述各向异性非均质材料塑性变形行为的重要方法，晶体塑性模型能够基于晶体材料的微观组织结构预测其宏观力学性能，在航空航天金属的力学性能设计及评估中展现出应用前景。本文总结了晶体塑性模型的发展历程和不同变种，从流动准则、硬化模型和内部状态变量演化3个角度对比分析了唯象晶体塑性模型与基于物理机制的晶体塑性模型的特点与差异；然后介绍了基于疲劳指示参数和寿命评估准则的晶体塑性有限元在金属疲劳寿命预测领域的应用尝试，以航空航天常用金属疲劳裂纹萌生寿命预测为例，给出了部分应用实例表明不同模型的预测能力和适用性；最后展望了晶体塑性模型和应用的未来发展趋势和有待加强的研究方向。