基于模型的定义（MBD）设计资源库的建设与应用

在信息技术飞速发展和快速应用的过程中，标准化在企业管理、型号研制及预研中发挥了不可替代的支撑作用。文章以某型号应用基于模型的定义（MBD）技术为背景，摘取信息技术标准化工作中的基础环节，阐述了MBD设计资源库的建设及应用效果。     

Working processes in the solid-propellant low-temperature aerosol generator with an inert heatexchanger

Alignment charts that make it possible to select a standard size of inert heatexchanger structures with specified output characteristics and a developed scheme of the low-temperature aerosol generator are presented.     

深刻理解办学指导思想,创造性开展工作

本文从力学指导思想的认识与落实教学改革，师资队伍建设３个方面结合本院实际进行浅议。     

TE_（113）模波导侧壁耦合滤波器的研究

文章描述了一种侧壁耦合波导滤波器的设计方法,详细探讨了侧壁耦合结构,并在对侧壁耦合分析的基础上,使用CST软件仿真了一部TE113模侧壁耦合滤波器,实现了四阶椭圆函数特性,仿真结果与实测结果吻合良好。另外,对寄生耦合与简并模式耦合机构之间的关系也进行了深入探讨。     

不同回火温度对冶金锯片用钢65Mn力学性能的影响

利用力学性能测试及热处理分析，在360℃-540℃之间对冶金锯片用钢65Mn进行了连续回火处理。结果显示：随着回火温度的升高，试样的强度及硬度连续下降。在400—420℃之间，发现了回火脆性，冲击值、断面收缩率和延伸率发生明显变化。实验结果为预防锯片工作过程中的失效提供了技术参考。     

偏转弹头导弹控制系统设计与仿真

根据弹头的可偏转特性,利用无根多刚体系统动力学方法建立了偏转弹头导弹的动力学模型,并对通道间的耦合特性及弹头偏转对弹体运动的影响进行了分析。在此基础上,将通道间的耦合及弹头偏转对弹体运动的影响作为干扰项处理,将气动参数的非线性变化等效为标称参数的摄动,利用变结构控制理论设计了偏转弹头导弹的控制器。仿真结果表明,所设计的变结构控制器能够有效地减小和消除俯仰、偏航通道对滚转通道的耦合作用以及弹头偏转对弹体运动的影响,较好地抑制了导弹气动参数的摄动,具有较高的稳态精度和良好的动态性能。     

夹具质量对标准测力仪的影响

分析了用试验机进行力学性能检定过程中，夹具的质量对标准测力仪造成的影响，并通过分析原因，给出消除或减小这种影响的方法。     

基于交叉验证的捷联惯导制导工具误差分离方法

在捷联惯导制导工具误差分离过程中引入交叉验证检验制导工具误差分离精度,并基于均方误差准则建立量化检验指标.首先建立简化的制导工具误差分离模型,并将数据划分成训练集和检验集;然后利用训练集进行制导工具误差分离;最后利用检验集和量化检验指标对分离效果进行检验.数学仿真表明,提出的误差分离模型正确可靠,精度较高,交叉验证能够对分离效果进行有效检验.     

Contribution of ionospheric TEC anomalies to detecting the seismic precursors related to the 2008 Oran-Algeria event

The ionospheric anomalies observed before any notable earthquake have become the subject of predictive research in the field of seismo-ionospheric coupling and/or Solid Earth-Atmosphere. In this paper, the concept of ionospheric modeling has been applied using total electronic content (TEC); derived from dual-frequency GPS recordings from about sixty permanent geodetic stations. The study and the analysis of the anomalous TEC variations, quantifiable on a regional scale, allowed us to detect the principal precursors of the M_w 5.5 earthquake that hit Oran on June 06th, 2008. The envisaged analytical approach is based principally on the time delays estimation relating to the seismic responses from the triggering (lithospheric seismic source) until their recording in data Rinex (GPS_IGS stations) through the reflection system of the electromagnetic waves on the ionospheric level (F2-layer).Indeed, in term of location, the longitude-latitude coordinates of the Oran event epicenter (0.658°W, 35.883°N) affecting the coastal margin of Western Algeria without too much material damage. Although the magnitude of this earthquake is qualified moderate (M_w 5.5, seismic intensity scale V-VI), one can observe apparent disturbances in the terrestrial electromagnetic spectrum associated with ionospheric TEC variations. In the domain of geodetic data analysis, we have noted a significant increase in the ionospheric TEC, which announces the arrival of a seismic precursor several days before the main studied event. Against this background, we emphasize that any seismic event, of significant magnitude, often carries information associated with other variants involved in the package of earthquake studied. Among these variants we evoke the effect of the magnetic field and the effect of the surrounding environment, etc. As for the specific behavior of the GPS_TEC signal, obtained from the Rinex data, and its interaction with the associated seismic activity, we highlight the existence of a spectral conformity between the geomagnetic field and that of the TEC content (spontaneous polarization of the TEC).Finally, we have just confirmed the effectiveness of this forecasting approach which relates the seismo-ionospheric precursors that are embedded in the physical trace of the electromagnetic signal relative to significant and/or moderate earthquakes (M ≥ 5); such as the envisaged case of the 2008 Oran event.     

直升机薄壁管梁加工技术研究

在直升机设计制造过程中，薄壁长管梁的焊接、机加一直是比较棘手的问题。就某型号直升机薄壁长管梁的焊接、机加问题，从工艺方案设计、工艺参数选择、定位装夹方法等几个方面来寻求解决途径，保证薄壁长管梁的加工精度。