激波管中测量JP-10点火延时的吸附问题研究

在JP-10点火延时的激波管实验中,JP-10在激波管壁的吸附导致气相浓度的不确定是测量结果分散的主要原因之一.利用精确测定的吸附曲线确定了实验时JP-10真实的气相浓度,解决了高碳数碳氢燃料点火延时激波管实验时管壁吸附影响燃料气相浓度确定的困难.实验显示JP-10的吸附符合Langmuir吸附等温关系.     

浮动壁火焰筒壁温试验和计算分析

对某浮动壁火焰筒的壁温进行了试验和计算分析。该火焰筒应用了新型的浮动壁结构和高效的冲击/发散复合冷却技术。壁温分布试验在全环形燃烧室试验台上进行,采用热电偶和示温漆测量。计算采用了稳态导热问题的有限元求解方法。研究分析表明,火焰筒壁温在材料的长期许用温度范围内,壁温计算反映了火焰筒壁温的分布规律和趋势。冲击/发散复合冷却方式的轴向壁温梯度小于缝槽气膜冷却方式,对降低热应力水平,延长火焰筒使用寿命有利。     

Influence of deformation zone length on bending radius of SS304 tubes with small diameters manufactured via free bending-based active motion

In three and six-axis free-bending equipment, the deformation zone length(A) is a fixed mechanical structure parameter modified when the relevant structure is redesigned and manufactured. In this study, a six degree of freedom(6-DOF) parallel mechanism was used as the control mechanism of the bending die, and a new method of changing the deformation zone length(A)was proposed. Firstly, an idealized geometric model of free bending-based active motion was established. Then, the influence of the de...     

Plastic wrinkling model and characteristics of shear enforced Ti-alloy thin-walled tubes under combination die constraints and differential temperature fields

Plastic wrinkling predictions and shear enforced wrinkling characteristics of Ti-alloy thin-walled tubes under combination die constraints have become key problems urgently in need of solutions in order to improve forming quality in their shear bending processes under differential temperature fields. To address this, a wrinkling wave function was developed by considering their shear bend deformation characteristics. Based on this wave function and the thin shell theory, an energy prediction model for this type of wrinkling was established. This model enables considera-tion of the effects of shear deformation zone ranges, material parameters, loading modes, and fric-tion coefficients between tube and dies on the minimum wrinkling energy. Tube wrinkling sensitive zones (WSZs) can be revealed by combining this wrinkling prediction model with a thermal-mechanical coupled finite element model for simulating these bending processes. The reliability of this wrinkling prediction model was verified, and an investigation into the tube wrinkling char-acteristics was carried out based on the experimental conditions. This found that the WSZs are located on either a single side or both sides of the maximum shear stress zone. When the friction coefficients between the tube and the various dies coincide, the WSZs are located on both sides. The larger the value of the tube inner corner radius and/or the smaller the value of the outer corner radius, the smaller the wrinkling probability. With an increase in the value of the moving die dis-placement, the wrinkling probability increases at first, and then decreases.     

电视导引头图像闪烁故障分析

针对电视导引头存在的“图像闪烁”故障，重点分析了故障的常发生部位，如硅靶管、CCD、图像处理电路和电视摄像机光圈等，并从故障部位的结构特点和工作原理入手，详细阐述了故障产生的原因、机理以及排故方法，为同类故障的修理提供参考。     

挤压式无扩口导管密封性能改进研究

针对某型飞机在使用过程中出现的气动系统严重漏气、液压系统低压渗油等问题,对导管加工工艺、鉴定试验及装配工艺进行改进与优化,降低了导管故障率,提高了装备使用可靠性。     

冲击波对工程结构及装备的动载试验研究

获得国家科学技术进步一等奖的“1485抗爆激波管”是用来模拟爆炸冲击波的室内试验设备，其驱动段是以燃烧火药为能源，锥管前面管体内径是348mm，锥管后面试验段及其出口段内径为1485mm。试验段内部超压可达0．05～1．20MPa。地上试验段参试物安装在管内。地下试验段是内径2．50m、高3．00m的箱体，内部可进行地下结构模型试验。驱动段膜片夹紧力是由8个油缸及其二级连杆增力机构来完成。有长江三峡大坝动力响应试验、地下隧道试验、地形对冲击波影响试验及人防工事试验等已做过的部分典型试验。     

Temperature effect on buckling properties of ultra-thin-walled lenticular collapsible composite tube subjected to axial compression

This paper seeks to outline the temperature effect on the buckling properties of ultra-thin-walled lenticular collapsible composite tube(LCCT) subjected to axial compression.The buckling tests of the LCCT specimens subjected to axial compression were carried out on INSTRON-500 N servo-hydraulic machine in dry state and at the temperatures of 25 C, 100 C and 80 C. The load–displacement curves and buckling initiation loads were measured and the buckling initiation mechanism was discussed from experimental observations. Experiments show that the buckling initiation load, on average, is only about 2.2% greater at the low temperature of 80 C than at the room temperature of 25 C due to the material hardening, demonstrating an insignificant increase in the buckling initiation load, whereas it is about 19.5% lower at the high temperature of 100 C than at the room temperature owing to the material softening, implying a significant decrease in the buckling initiation load. The failure mode of the LCCT in axial compression tests at three different temperatures can be reckoned to be characteristic of the buckling initiation and propagation around the central region until rupture. The finite element(FE) model is presented to simulate the buckling initiation mechanism based on the eigenvalue-based methodology. Good correlation between experimental and numerical results is achieved.     

气膜冷却孔几何结构对流量系数的影响

为了研究火焰筒壁面气膜冷却孔几何结构对流量系数的影响规律，设计了几种具有不同几何尺寸和排列结陶的气膜冷却孔实验件。对气膜冷却孔的流量系数进行了实验研究。实验结果表明．在吹风比较小时．随吹风比的增加流量系数大幅度增加．当吹风比较大时，随吹风比的增加流量系数增幅减小。同时．在气膜孔厚径比大于1时，气膜孔的排列形式对流量系数的影响不大，当厚径比小于1时．叉排气膜孔的流量系数要高于顺排气膜孔的流量系数。     

用内文丘里管流量计测量酸气流量

介绍了新型差压装置--内文丘里管的结构、测量原理、技术性能;根据差压式流量计的测量原理,建立了计算酸气流量的数学模型,并将内文丘里管流量计成功地应用于酸气流量的测量.