Accurate 3D Target Positioning in Close Range Photogrammetry with Implicit Image Correction

Accurate three-dimensional (3D) target positioning is of great importance in many industrial applications. Although various methods for reconstructing 3D information from a set of images have been available in the literature, few of them pay enough attention to the indispensable procedures, such as target extraction from images and image correction having strong influences upon the 3D positioning accuracy. This article puts forward a high-precision ellipse center (target point) extraction method and a new image correction approach which has been integrated into the 3D reconstruction pipeline with a concise implicit model to accurately compensates for the image distortion. The methods are applied to a copyright-reserved close range photogrammetric system. Real measuring experiments and industrial applications have evidenced the proposed methods, which can significantly improve the 3D positioning accuracy.     

基于进化策略的飞行控制系统优化

针对飞行控制系统控制器参数优化问题,提出了一种基于反馈和共享机制的改进进化策略。将各代当前最优搜索结果和共享度信息反馈到变异步长的更新公式中,达到提高算法全局搜索能力和搜索精度的目的。将此策略应用于某型飞机的横侧向飞行控制系统的参数优化之中,仿真结果表明,该优化策略能够快速有效地整定飞行控制系统参数。     

基于混合战略均衡双寡头航空公司定价博弈研究

利用产品差异化理论和博弈理论,建立了双寡头航空公司市场竞争定价的不完全信息静态博弈模型,假定双方经营相同航线、选择相同机型、面临相同旅客,而在产品价格和服务水平方面存在差异性,在文献【1】中证明了这种博弈不存在纯策略均衡,按照纳什均衡解存在性理论,对混合战略均衡进行求证,得出结论：双方价格和服务水平的大小关系一致时,其市场份额和期望利润的关系与之相同;双方两因素关系随机变化时,其市场份额及期望利润同其变化程度有关,即结果不确定。     

某型涡扇发动机状态模型修正

为了针对每一台发动机建立准确的气路故障诊断模型,采用部件法建立了某型涡扇发动机的基准数学模型,分析了模型失配的原因,确定出需要修正的特性参数,采用小波分析实现对可测参数数据的预处理,通过求解所建的扩展非线性方程组完成了发动机模型的离线修正。经仿真验证该算法有较高精度,且易于工程实现,为建立准确的稳态气路故障诊断方程奠定了基础。     

应用混合演化策略的机翼气动优化设计

把基于实数编码的遗传算法与可变容差法相结合,建立了数值优化设计中的混合演化策略(HES),并将其与机翼的气动分析相结合进行跨音速机翼的气动优化设计.与基准机翼相比,优化设计的机翼其气动性能有较大程度的改善,表明了混合演化策略在机翼优化设计中的有效性.与单纯的遗传算法(GA)相比,应用混合演化策略的气动优化设计具有更高的优化效率和优化质量.     

航天发射特征事件综合和弹道融合策略优化研究与应用

特征事件综合和弹道融合是航天发射过程中最为重要的一项工作,通过特征事件发生时间和火箭飞行弹道可直观地反映出运载火箭的飞行状态。因此,为了进一步提高特征事件综合和弹道融合效果,基于遥、外测量信息,分别对参与特征事件综合和弹道融合的信息源进行分类及其影响因素进行分析,并提出了相应的信息融合策略。通过采用优化的融合策略,可进一步提高特征事件时间解算的准确性和实效性,提升弹道融合的效果,满足航天发射飞行态势显示和安全控制的任务需求。     

Detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target

The rotational motion of a tumbling target brings great challenges to space robot on successfully capturing the tumbling target. Therefore, it is necessary to reduce the target’s rotation to a rate at which capture can be accomplished by the space robot. In this paper, a detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target is proposed. This strategy can reduce the target’s rotational velocity while maintaining base attitude stability through the establishment of the rotation attenuation controller and base attitude adjustment controller. The rotation attenuation controller adopts the multi-space hybrid impedance control method to control the friction precisely. The base attitude adjustment controller applies the dual-arm extended Jacobian matrix to stabilize the base attitude. The main contributions of this paper are as follows: (1) The compliant control method is adopted to achieve a precise friction control, which can reduce the target angular velocity steadily; (2) The dual-arm extended Jacobian matrix is applied to stabilize the base attitude without affecting the target capture task; (3) The detumbling strategy of dual-arm space robot is designed considering base attitude stabilization, realizing coordinated planning of the base attitude and the arms. The strategy is verified by a dual-arm space robot with two 7-DOF (degrees of freedom) arms. Simulation results show that, target with a rotation velocity of 20 (°)/s can be effectively controlled to stop within 30 s, and the final deflection of the base attitude is less than 0.15° without affecting the target capture task, verifying the correctness and effectiveness of the strategy. Except to the tumbling target capture task, the control strategy can also be applied to other typical on-orbit operation tasks such as space debris removal and spacecraft maintenance.     

Hypersonic vehicle aerodynamic design using modified sequential approximate optimization

Hypersonic vehicles are receiving increased attention within the aerospace community due to their high cruise speed and long-range capabilities. In this paper, a modified Sequential Approximate Optimization method is proposed for an optimized aerodynamic design of a hypersonic vehicle. As part of this approach, a constrained experimental design method is developed to handle the constraints more efficiently. A radial basis function is used to surrogate time-consuming CFD analysis. An efficient and more robust numerical mesh morphing scheme for the hypersonic vehicle is developed for the generation of high-quality meshes. Within this paper, a novel adaptive infilling strategy is proposed which uses an inaccurate search technique coupled with an elite archive. This allows the location of a more promising sample region and hence improves the surrogate accuracy, thereby further enhancing the optimization efficiency. A hypersonic vehicle aerodynamic design problem is solved using the proposed approach and satisfactory results are obtained at much lower computational costs. The lift-to-drag ratio is increased by 23.8% when compared with the base configuration while also satisfying the volume and lift constraints. The pressure and Mach contours have been compared with those of the base configuration and the results demonstrate the strength of the optimized configuration. The modified sequential approximate optimization for designing an improved hypersonic vehicle is worth referencing in future work.     

视觉检测系统定位误差分离及修正技术探讨

介绍了视觉检测系统中的机械定位系统，讨论了两种定位方法──“硬件定位”（机械定位）及“软件定位”（定位误差的修正和补偿技术）。     

卫星指令控制系统中的信息反馈校验监督

本文讨论采用信息反馈校验方式的卫星指令控制系统的信息反馈校验监督能力问题。提出了关于信息反馈校验指令控制系统的最佳监督概念和校验监督能力的概率表示。还讨论了改善系统校验监督能力的途径。利用本文给出的概率分析方法,可以完成系统性能的评价。