柔性多层冲击空间碎片防护结构设计与试验

充气展开密封结构是未来空间站以及大型空间居住舱的理想构建形式,其外蒙皮由气密层、增强层、微流星体和空间碎片防护层、辐射保护层以及热控层组成。为了既满足对空间碎片的防护,又满足折叠、收纳以及展开的要求,空间碎片防护层需要采用多层冲击防护结构设计。基于多层冲击防护结构,采用国产的玄武岩纤维材料和芳纶织物的特性参数,根据弹道极限方程设定了柔性空间碎片防护层的设计参数,并通过高速撞击试验对根据设计参数生产的试验件进行了试验验证,试验结果与柔性多层冲击防护结构的弹道极限方程吻合较好。     

基于全局稀疏地图的AGV视觉定位技术

为了实现自动导引车（AGV）在复杂工业环境下的高精度定位,克服环境变化给定位带来的影响,提出了基于全局稀疏地图的视觉定位方法。首先,设计了大容量二维编码点,作为人工路标铺设在工业环境的地面;然后,基于一种四边形识别算法,在复杂工业环境中准确分割和识别二维编码点;最后,利用二维编码点提供的编码信息,鲁棒匹配图像中的特征点,并以此为基础,使用一种分参数块优化的三维重建策略,实现了工业环境的大规模地图构建,为AGV视觉定位提供了一种稀疏电子地图。AGV视觉的定位通过匹配车载视觉传感器图像中的特征点和稀疏电子地图实现。停车重复定位精度小于0.5 mm,角度偏差小于0.5°,轨迹平均位移误差小于0.1%。实际应用结果表明,该方法能在复杂工业环境中实现AGV视觉的定位,定位的速度和精度方面都满足工业应用的要求,为AGV的视觉定位提供了新的思路。      

A new modeling scheme for powered parafoil unmanned aerial vehicle platforms: Theory and experiments

A novel framework is established for accurate modeling of Powered Parafoil Unmanned Aerial Vehicle (PPUAV). The model is developed in the following three steps: obtaining a linear dynamic model, simplifying the model structure, and estimating the model mismatch due to model variance and external disturbance factors. First, a six degree-of-freedom linear model, or the structured model, is obtained through dynamic establishment and linearization. Second, the data correlation analysis is adopted to determine the criterion for proper model complexity and to simplify the structured model. Next, an active model is established, combining the simplified model with the model mismatch estimator. An adapted Kalman filter is utilized for the real-time estimation of states and model mismatch. We finally derive a linear system model while taking into account of model variance and external disturbance. Actual flight tests verify the effectiveness of our active model in different flight scenarios.     

基于时标分解的弹性高超声速飞行器智能控制

考虑弹性高超声速飞行器纵向动力学模型，提出了一种基于时标分解的智能控制方法。考虑刚体状态和弹性模态具有不同的时标特性，采用奇异摄动理论进行快慢时标分解，将模型转换为刚体慢变子系统和弹性快变子系统。针对刚体子系统考虑动力学不确定，基于平行估计模型构造表征不确定逼近效果的预测误差，结合跟踪误差给出复合学习控制策略。针对弹性子系统设计自适应滑模控制稳定弹性模态。通过李雅普诺夫稳定性分析可证系统状态一致终值有界。仿真表明所提出的控制方法能够实现刚弹模态的稳定收敛，且具有更高的跟踪精度、更好的学习性能和更快的收敛速度。     

Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components

By integrating topology optimization and lattice-based optimization, a novel multi-scale design method is proposed to create solid-lattice hybrid structures and thus to improve the mechanical performance as well as reduce the structural weight. To achieve this purpose, a two-step procedure is developed to design and optimize the innovative structures. Initially, the classical topology optimization is utilized to find the optimal material layout and primary load carrying paths. Afterwards, the solid-lattice hybrid structures are reconstructed using the finite element mesh based modeling method. And lattice-based optimization is performed to obtain the optimal cross-section area of the lattice structures. Finally, two typical aerospace structures are optimized to demonstrate the effectiveness of the proposed optimization framework. The numerical results are quite encouraging since the solid-lattice hybrid structures obtained by the presented approach show remarkably improved performance when compared with traditional designs.     

结合跳点引导的无人机随机搜索避撞决策方法

针对无人机在城市空域环境和密集交通流下的避撞决策问题，提出马尔科夫决策过程（MDP）和蒙特卡洛树搜索（MCTS）算法对该问题进行建模求解。蒙特卡洛树搜索算法在求解过程中为保证实时性而使其搜索深度受限，容易陷入局部最优，导致在含有静态障碍的场景中无法实现避撞的同时保证全局航迹最优。因此结合跳点搜索算法在全局规划上的优势，建立离散路径点引导无人机并改进奖励函数来权衡飞行路线，在进行动态避撞的同时实现对静态障碍的全局避撞。经过多个实验场景仿真，其结果表明改进后的算法均能在不同场景中获得更好的性能表现。特别是在凹形限飞区空域仿真模型中，改进后的算法相对于原始的蒙特卡洛树搜索算法，其冲突概率降低了36%并且飞行时间缩短47.8%。     

虚拟多触角探测的高超声速滑翔飞行器再入机动制导

针对高超声速滑翔飞行器再入过程中面对的多约束问题，提出一种基于虚拟多触角探测的路航点规划机动制导策略。该机动制导策略通过飞行器最大转弯轨迹计算速度-剩余地面距离-航向角约束，在分段定点模式中发出多条粗略预测触角，引用触角末端反馈的信息计算优先级以确定临时路航点；同时在机动制导模式中发出精细探测触角，计算触角末端信息优先级，经倾侧角延时滤波器得出控制指令，对飞行器进行机动制导。基于多触角探测的路航点规划机动制导策略，降低了三触角机动制导方法中的计算时间；同时，4种典型禁飞区条件下的仿真结果表明，该策略能够有效稳定地解决机动制导过程中的多约束问题。     

Computational engineering analysis of external geometrical modifications on MQ-1 unmanned combat aerial vehicle

This paper focuses on the effects of external geometrical modifications on the aerodynamic characteristics of the MQ-1 predator Unmanned Combat Aerial Vehicle (UCAV) using computational fluid dynamics. The investigations are performed for 16 flight conditions at an altitude of 7.6 km and at a constant speed of 56.32 m/s. Two models are analysed, namely the baseline model and the model with external geometrical modifications installed on it. Both the models are investigated for various angles of attack from −4° to 16°, angles of bank from 0° to 6° and angles of yaw from 0° to 4°. Due to the unavailability of any experimental (wind tunnel or flight test) data for this UCAV in the literature, a thorough verification of calculations process is presented to demonstrate confidence level in the numerical simulations. The analysis quantifies the loss of lift and increase in drag for the modified version of the MQ-1 predator UCAV along with the identification of stall conditions. Local improvement (in drag) of up to 96% has been obtained by relocating external modifications, whereas global drag force reduction of roughly 0.5% is observed. The effects of external geometrical modifications on the control surfaces indicate the blanking phenomenon and reduction in forces on the control surfaces that can reduce the aerodynamic performance of the UCAV.     

微藻反应器用于水气净化与产氧的功能验证

将微藻和电去离子技术引入密闭生态系统,设计单元反应器旨在验证其在空气再生、水净化和潜在食物的生产。在反应器中对尿液进行消解和NH4＋硝化转化得到超过90%NH4＋-N硝化为NO-3-N-的培养液适宜于螺旋藻养殖并获得高质量的微藻生物量;此时,CO2的平均吸收速率VCO2=458.6 mL/m3·min、O2产生速率VO2=616.5 mL/m3·min,即螺旋藻的同化系数VCO2/VO2≈0.74,接近人的呼吸系数VCO2/VO2=0.86;EDI法水净化率97%可直接回用。结果表明：该体系能实现CO2吸收、O2释放和螺旋藻生物量的生产,同时将水净化。     

受限航路空域自主航迹规划与冲突管理技术

为了解决在基于航迹运行的空中交通管理自动化系统中人机意识同步的问题，以航路运行为对象，开展了面向受限空域的自主四维航迹（4DT）冲突探测与解脱（CD&R）技术研究。基于自由航线空域（FRA）环境，提出基于栅格的空域离散化处理与计算方法；在此基础上，提出受限空域自主航迹运行两阶段方法：阶段1运用可视图（VG）法和Dijkstra算法，实现了满足限制区约束的航空器期望航迹快速规划；阶段2提出航迹可达时空域模型及其图形化表达方法，并基于连续飞行动力学推导出了不同情况下的航空器位置更新模型，并采用局部冲突探测与解脱方法，以飞行距离最短为目标，实现航空器自主路径与速度联动规划，从而支撑空地、人机认知同步的无冲突四维航迹生成；最后，以中国西部典型空域为运行场景开展仿真实验，验证了所提方法的计算高效性和模型有效性，并对栅格尺寸和探测距离这2个关键参数进行了灵敏度分析。结果表明，所提方法能够支撑复杂空域高密度运行环境自主航迹运行，为推动自主空中交通系统发展提供了新思路和新方法。