基于快速非奇异终端滑模的姿态控制技术

针对存在执行器故障与外部干扰的刚体飞行器姿态控制系统,提出一种基于快速非奇异终端滑模(NSFTSM)的姿态容错控制方法.控制方法不仅保证姿态机动过程的快速性,而且避免了传统的终端滑模面所带来的奇异性问题.采用二阶鲁棒精确微分器估计执行器故障与外部干扰,采用快速非奇异终端滑模技术设计姿态容错控制律,根据Lyapunov稳定性理论证明了方法的稳定性.稳定性分析表明,通过引入新型快速非奇异终端滑模,控制器使得闭环系统能够快速收敛到滑模面的微小邻域内,进而收敛到系统平衡点的微小邻域内,并且系统对外部干扰具有较强的鲁棒性.数值仿真结果验证了方法在姿态跟踪控制中的有效性.     

基于计划到达时刻的四维航迹规划

为了加速空管自动化与智能化技术的应用与实施,提出了水平航迹与高度/速度剖面分阶段设计的四维航迹规划方法。基于动态时间规整与层次聚类方法实现历史雷达航迹聚类分析,完成水平航迹设计。建立速度剖面规划模型,通过航迹生成器与速度调整器交互协作,精细化控制进场时间,以满足计划到达时间要求。以上海浦东国际机场PINOT进场航班为例实施验证,结果表明,四维航迹规划方法可有效实现航班的计划到达时间,从而减少航班延误,提高终端空域运行效率。     

飞机装配质量数字化检测技术研究及应用

针对飞机装配过程质量评价对数字化测量技术的需求,开展了面向飞机装配的数字化测量特征设计、测量方案设计、多系统异构测量场构建、测量误差分析与修正等技术研究,并以表面类、内部结构特征、大部件对接和活动部件装配质量的控制为例,阐述了测量设备选型、整体测量场的构建方法及其应用效果.     

航空发动机增益调度控制的多项式平方和规划方法

针对现有的线性变参数(linear parameter varying,LPV)控制器设计方法都是关于仿射参数依赖系统而没有专门针对多项式描述的LPV系统这一现状,提出了一种基于多项式平方和(sum of squares,SOS)规划的增益调度控制设计方法,并将其用于转速大范围变化时的航空发动机高压转子转速及压比控制.根据发动机非线性模型获取不同转速下的状态空间模型,并利用多项式拟合的方法建立发动机线性变参数模型.给出能够保证无静差的增益调度控制结构,利用有界实定理和多项式平方和理论推导出能够保证闭环系统鲁棒稳定的SOS约束条件,并形成控制器求解的SOS规划问题,通过求解获得多项式描述的增益调度控制器.分别以LPV模型和发动机非线性模型为对象做阶跃仿真,结果表明:高压转子转速/发动机压比控制系统的调节时间在2s以内,稳态误差不超过0.1%.      

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

Machining of a film-cooling hole in a single-crystal superalloy by high-speed electrochemical discharge drilling

Single-crystal superalloys are typical advanced materials used for manufacturing aeroengine turbine blades. Their unique characteristics of high hardness and strength make them exceedingly difficult to machine. However, a key structure of a turbine blade, the film-cooling hole,needs to be machined in a single-crystal superalloy; such machining is challenging, especially considering the increasing levels of machining efficiency and quality demanded by the aeroengine industry. Tube electrode high-speed electrochemical discharge drilling(TSECDD), a hybrid technique of high-speed electrical discharge drilling and electrochemical machining, provides high machining efficiency and accuracy, as well as eliminating the recast layer. In this study, TSECDD is used to machine a film-cooling hole in a nickel-based single-crystal superalloy(DD6). The Taguchi methods of experiment are used to optimise the machining parameters. Experimental results show that TSECDD can effectively drill the film-cooling hole; the optimum parameters that give the best performance are as follows: pulse duration: 12 ls, pulse interval: 30 ls, peak current:6 A, and salt solution conductivity: 3 m S/cm. Finally, a hole is machined by TSECDD, and the results are compared with those obtained by electrical discharge machining. TSECDD is found to be promising for improving the surface quality and eliminating the recast layer.     

基于新型丝状电极等离子体激励器的前体涡控制

本文首次将新型丝状暴露电极DBD等离子激励器应用于大迎角下细长体非对称涡控制.丝状暴露电极的材料的选择对DBD推力以及推力效率至关重要,通过地面精细推力测量对丝状暴露电极等离子体激励器进行了优化,结果表明,本文研究材料中采用钨丝作为暴露电极,其推力效率最优;且随着电极直径从d=0.3 mm减小到d=0.08 mm,DB...     

超声速变马赫数风洞流场参数线性变化验证

旋转喷管型面使超声速变马赫数风洞在单次运行过程中可连续调节实验区的马赫数,便于研究飞行器的机动过程、进气道起动过程中的气动问题。在控制喷管型面旋转过程中,流场参数能否线性变化是衡量超声速变马赫数风洞性能的一个重要指标。分析变马赫数风洞实验区流场参数的线性变化规律,利用弹簧光顺的动网格技术建立数值仿真模型,验证喷管位于马赫数3.041~3.215 范围所对应的位置时,实验区流场参数是否满足线性变化规律。结果表明：通过对喷管型面旋转的控制实现了风洞实验区流场参数的线性变化,动态计算结果与预期实验区流场参数线性变化规律吻合良好;在不同加速度的流场参数线性变化过程中,各时刻实验区的平均参数与预期参数之间的偏差均小于0.13%。     

地面效应对尾涡消散的影响研究

采用大涡模拟方法可以分析和计算近地阶段尾涡消散和运动规律,但模型繁琐、计算复杂。本研究基于镜像涡方法建立了形式相对简单、计算迅速的近地尾涡运动模型和消散模型,计算结果与激光雷达测量数据和大涡模拟数据的偏差都不超过5％,满足动态尾涡间隔研究的需要。     

科氏质量流量计非线性振动特性研究(英文)

科氏质量流量计(Coriolis mass flowmeter,CMF)当测量管振动幅度较小时,一般被认为是线性系统,但CMF输出信号频谱中具有倍频成分。结合CMF传感器的数学模型,在适当简化测量管边界条件的情况下,建立了考虑非线性因素和外部激励的直管型CMF测量管运动方程,并运用Galerkin方法对运动方程进行离散处理,由离散后的结果可以看出,系统含有多组非线性影响因素成分。针对测量管的闭环谐振和标准正弦信号受迫振动,分别采用激光测振仪对其振动状态进行测量,测量结果均含有非线性因素成分,证实了非线性分析的准确性;针对测量管的不同振动幅度进行了测量精度实验,验证了测量管振动幅度越大非线性影响越严重。理论分析结果和实验结果对CMF性能的进一步提高具有指导意义。