滑动运行继电式激光制导系统

 继电控制式激光制导系统的简单性使它具有高可靠性、低成本等优点。而系统自振使得弹着点散布大,降低了制导精度。将滑动运动模态引人系统,使其变成滑动运行的继电控制方式。结果,弹着点散布压缩,制导精度提高,而且保持了原系统的优点。介绍了该系统的组成,分析了提高制导精度的原理,并提供一些仿真结果。     

Design and Application of Discrete Sliding Mode Control with RBF Network-based Switching Law

This article proposes a novel approach combining exponential-reaching-law-based equivalent control law with radial basis function (RBF) network-based switching law to strengthen the sliding mode control (SMC) tracking capacity for systems with uncertainties and disturbances. First, SMC discrete equivalent control law is designed on the basis of the nominal model of the system and the adaptive exponential reaching law, and subsequently, stability of the algorithm is analyzed. Second, RBF network is used to form the switching law in a direct and online manner with sliding-mode-related inputs and by approximating evaluation function; and the method to adjust its parameters is devised. Finally, comparable experiments are carried out to verify the application of the proposed approach to an inner-axis driven by a direct current (DC) torque motor through extra-low speed servo for a high precision flight simulator, and the axis works under deteriorating conditions such as periodically fluctuating torques of motor, nonlinear friction, and time-varying model parameters. The results show that the combined SMC can effectively improve the servo performance, for instance, to a stable 0.000 08 (°)/s speed response, the tracking error would be within 0.000 08° in 98% of operating times. Moreover, the hybrid nature of the approach imparts the RBF network the features of removing offline training and ease to set initial parameters.     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

以先进的制造技术和管理取得竞争优势

针对如何提高机械加工的生产效率,改进生产管理结合实际工作做了论述,提出了自己的观点。     

壁面摩擦对风洞侧壁干扰的影响

本文研究了摩擦对风洞侧壁干扰的影响。在以Barnwell为代表开展的一系列侧壁干扰研究中,所有工作都未计及摩擦的影响。我们认为,Barnwell等人的这一处理理论上有缺陷。对此,本文用Karman-Pohlhausen方法对侧壁边界层作了分析,指出摩擦对侧壁干扰有不同程度的影响,具体取决于Pohlhausen参数B的大小;B越小,影响越大。Barnwell略去摩擦项的结果只对应于分离边界层情况,而事实上Barnwell处理的是附着边界层。通过这一分析,本文建立了有摩擦影响的侧壁干扰修正的新形式;考虑到多种因素的影响,初步建议参数B按中间值取为B=3～4。最后,就修正参数δ~*的确定作了一定讨论。     

考虑输入饱和的固定翼无人机自适应增益滑模控制

针对复杂环境下的固定翼无人机飞行控制问题，考虑输入饱和以及复杂外界干扰的影响，提出一种基于自适应滑模控制方法的固定翼无人机飞行控制策略。首先，对固定翼无人机模型进行介绍，将模型分为姿态子系统和速度子系统；其次，针对姿态子系统和速度子系统的特点以及控制需求，分别采用自适应多变量螺旋滑模和自适应快速超螺旋滑模设计姿态控制器和速度控制器，该策略无需设计干扰观测器对外界干扰进行估计，仍然可以实现固定翼无人机对姿态参考指令和速度参考指令的有限时间精确跟踪，并基于Lyapunov的稳定性分析方法证明了闭环系统的稳定性。最后，对本文所提出的控制策略进行了仿真验证，结果表明该控制策略具有良好的控制性能。     

航天器近距离交会的固定时间终端滑模控制

针对航天器近距离交会段的位置姿态耦合控制问题，假设航天器受外界干扰且目标航天器存在空间自由翻滚情形时，基于固定时间概念设计了一种六自由度位姿终端滑模自适应控制器，通过引入显含正弦函数的切换项来避免奇异问题。此外所设计的控制器含双幂次项，不仅能全局提高姿态和位置的跟踪速度及精度，还能估计系统稳定所需的时间上界，且该上界与状态初始值无关。基于Lyapunov方法分析了闭环系统的固定时间稳定性。仿真结果表明，该控制器能快速实现对航天器近距离交会时相对位置和姿态的控制，具有较高的精度和良好的干扰抑制能力。     

Gaussian mixture model based adaptive control for uncertain nonlinear systems with complex state constraints

This paper addresses an uncertain nonlinear control system problem with complex state constraints and mismatched uncertainties. A novel Gaussian Mixture Model(GMM) based adaptive PID-Nonsingular Terminal Sliding Mode Control(NTSMC)(GMM-adaptive-PID-NTSMC)method is proposed. It is achieved by combining a GMM based adaptive potential function with a novel switching surface of PID-NTSMC. Next, the stability of the closed-loop system is proved.The main contribution of this paper is that the GMM meth...     

液压泵摩擦副可靠性设计基本方法研究

阐述了液压泵摩擦副可靠性分析及设计的基本步骤和原则。作为实例,文中给出了滑靴耐磨可靠性设计所采用的（pv）应力模型新方法。     

改善反作用轮低速性能的补偿观测器方法

基于Ｄａｈｌ摩擦模型,给出了用于卫星姿态三轴稳定控制的反作用轮低速动力学方程,就反作用轮转速过零对卫星姿态产生的扰动现象进行了分析,提出了一种利用非线性观测器估计摩擦力矩,并予以补偿的补偿观测器方法。仿真结果表明,该方法改善了反作用轮低速性能,提高了卫星姿态控制的指向精度和稳定度。