Energy principle and material removal sequence optimization method in machining of aircraft monolithic parts

In the machining process of aircraft monolithic parts, the initial residual stress redistribution and structural stiffness evolution often lead to unexpected distortions. On the other hand, the stress redistribution and stiffness reduction during the machining process depend on the material removal sequence. The essence of the stress redistribution is releasing the initial elastic strain energy. In the present study, the influence of the material removal sequence on the energy release is studied. Moreover, a novel optimization method is proposed for the material removal sequence. In order to evaluate the performance of the proposed method, the mechanism of the machining distortion is firstly analyzed based on the energy principle. Then a calculative model for the machining distortion of long beam parts is established accordingly. Moreover, an energy parameter related to the bending distortion and the procedure of the material removal sequence optimization is defined. Finally, the bending distortion analysis and material removal sequence optimization are performed on a long beam with a Z-shaped cross-section. Furthermore, simulation and experiments are carried out. The obtained results indicate that the optimized sequence results in a low distortion fluctuation and decreases the bending distortion.     

A user-friendly yield criterion for metals exhibiting tension-compression asymmetry

The aim of this paper is to model the yielding asymmetry of pressure-insensitive metals, including but not limited to Ni₃Al alloys. The main focuses are put on the flexibility and manipulative convenience. The parameters of theory are kept to a minimum and can be determined by as few tests as possible. These requirements are fulfilled by constructing a yield function using the second and third-invariants of a linearly transformed stress tensor. The proposed yield criterion has a simple mathematical form and has only seven parameters when used in three-dimensional stresses. Compared with existing theories, the new yield criterion has much fewer parameters, which makes it very convenient for practical applications. The coefficients of the criterion are identified by an error minimization procedure. Applications to a Ni₃Al based intermetallic alloy as well as a Cu-Al-Be shape memory alloy and comparison to other criteria show that the proposed criterion has nearly the same predictive ability and flexibility with other criteria. The proposed yield criterion can estimate the coefficients by using less data, which is a big advantage compared with other similar theories, especially when there is a limited number of experimental data.     

海洋大气环境下微动开关触点回跳时间增大故障的试验复现与分析

结合某型微动开关触点回跳时间增大导致某系统故障问题,设计了由干湿交替酸性盐雾试验和湿热试验组成的海洋大气环境效应加速模拟试验剖面,选取与外场故障件型号一致的微动开关为研究对象,通过实验室加速模拟试验,成功复现了外场故障现象,并结合试验结果对腐蚀性环境、电烧蚀等因素对触点回跳时间增大的影响机制进行了分析。     

三维光弹性测定应力强度因子K_Ⅰ的综合法

对利用三维光弹性试验数据计算应力强度因子K_I,提出一种新的算法--综合法。此法既解决了所需测量区域内条纹信息少的弱点,又克服了因裂纹尖端“钝化”而无法测到裂尖精确条纹值的困难。试验与计算结果表明此法误差小、精度最高。可应用测定受复杂载荷并具有复杂边界条件结构的应力强度因子。     

交变应力下冷胀孔边残余应力衰减规律的有损检测试验研究

对高胀孔量下的ＬＹ１２ＣＺ板件孔边残余应力在交变应力作用下衰减规律的有损多试件普通莫尔密栅云纹检测方法进行了尝试,给出了一定载荷范围内残余应力的衰减规律,揭示了高胀孔量下残余应力的再分布现象。研究表明,本文所使用的多试件有损检测方法,不但经济可行,而且有足够精度,应用前景十分广阔。     

GC－4高强度钢化学短裂纹特性研究

采用恒ΔＫ法对ＧＣ－４钢在３．５％ＮａＣｌ溶液中化学短裂纹特性进行了试验研究。结果表明：恒ΔＫ时裂纹扩展的ｄａ／ｄＮ－ａ曲线存在临界裂纹尺寸ａ。当ａ＜ａ时,显示化学短裂纹效应。ａ值几乎不受加载频率、应力比和ΔＫ水平的影响;化学短裂纹特征扩展速率与长裂纹扩展速率之比是各种力学参量的弱函数。依据分析给出化学短裂纹扩展速率与裂纹尺寸之间的关系。     

含不等长双裂纹无限大板应力强度因子

采用交替法求解了含任意相对位置不等长双裂纹的无限大极受均布拉应力作用的应力强度因子。此法以平面弹性力学的一个问题为基础,即含单裂纹无限大板,裂纹面受集中载荷,此问题的解已知,然后交替地满足边界条件。各种计算结果已绘成曲线。     

三维弹塑性接触问题的边界元法

将边界元法发展用于解决三维弹塑性接触问题,推导了无摩擦的三维弹塑性接触问题的积分方程,讨论了其数值解技术。数值结果与有限无法的数值结果对比表明,所发展的方法是成功的。     

Al－Al_3Ni自生复合材料的高周疲劳损伤断裂机制及其应力比的影响

实验观察和研究了Ａｌ－Ａｌ３Ｎｉ自生复合材料的高周疲劳损伤断裂行为以及应力比Ｒ的影响,结果显示在Ｒ＝－１疲劳过程中孔洞沿界面区基体的优先萌生、联接和扩展是其损伤断裂的主要机制;并且发现Ｒ对疲劳寿命及断裂过程有明显影响,当Ｒ＝０时滑移带裂纹生长相对容易,寿命减小,而Ｒ＝∞时,裂纹集中在类似于压缩变形的宏观形变带内发展,寿命很长     

疲劳韧性的数学表达式

通过对疲劳过程中材料能耗的分析,利用材料的循环应力－应变特性,建立了疲劳韧性的数学表达式,可用来较为准确地估算材料对应任一疲劳寿命的疲劳韧性。用该表达式对８种不同材料的应变疲劳试验数据进行了分析,获得了关于疲劳韧性的若干重要结论。