弧线齿面齿轮齿面接触分析

为了提高面齿轮副的强度并解决其磨齿问题,提出了弧线齿面齿轮副的一种新的加工方法,并研究其啮合特性.用有刀倾的刀盘旋转而成的切削面作为假想齿轮的齿面,模拟产形齿轮和被加工齿轮啮合过程.推导弧线齿面齿轮副齿面方程;根据两齿面在啮合过程中连续相切条件.建立了考虑安装误差的轮齿接触分析(TCA)模型;齿轮副计算机啮合仿真结果表...     

基于ANSYS的襟缝翼滚轮接触应力场分析

结合滚轮的实际使用环境和载荷,建立了滚轮与圆盘的有限元模型,对滚轮接触应力场进行了分析,从而弥补了赫兹接触理论的局限性,有效地确定了试验载荷,以指导开展模拟试验。     

Design and analysis of spiral bevel gears with seventh-order function of transmission error

This paper proposes a new approach to mial function of transmission error （TE） for spiral design and implement a seventh-order polyno- bevel gears with an aim to reduce the running vibration and noise of gear drive and improve the loaded distribution of the tooth. Based on the constraint conditions of predesigned seventh-order polynomial function curve and the theory of linear algebra, the polynomial coefficients of the seventh-order polynomial function of transmission error can be obtained. By applying a method named reverse tooth contact analysis, the modified roll coefficients as well as parts of machine-tool settings for the face-milling of spiral bevel gears can be individually determined. Therefore, a predesigned seventh-order polynomial function of transmission error for spiral bevel gears can be obtained by the modified roll with high-order coef- ficients, and comparisons of the seventh-order polynomial and parabolic functions of transmission error are also performed. The achievement of spiral bevel gears with the seventh-order function of transmission error can be accomplished on a universal Cartesian-type hypoid gear generator or a numerically controlled cradle-style hypoid gear generator due to its simple generating motion of axes of the cradle and the work piece. The results of a numerical example show that the bending stresses of the tooth of seventh-order are less than those of a parabolic one, while the contact stresses remain almost eouivalent.     

采用正弯静叶的压气机在不同轴向间隙下时序效应的实验

实验研究了一台采用正弯静叶的低速压气机在不同轴向间隙下的时序效应,详细测量了二级静叶出口的横截面流场.实验结果表明:随着轴向间隙的减小,时序效应未见明显变化,压气机扩压能力增强,输入扭矩随之增加,效率则呈现出先增大后减小的趋势,表明存在最佳周向间隙,同时喘振裕度有所下降.     

渐开螺旋面啮合误差的广义圆柱坐标测量原理

论述了渐开螺旋面啮合误差测量的新方法——广义圆柱坐标法,给出了测量原理与实现方法、数学模型和数据处理算式;同时,指出了迄今一些文献中论述啮合误差测量时存在的错误。     

满足一等量块检定要求的接触式激光量块干涉仪

最新研制的接触式激光量块干涉仪主要用于测量一、二等量块的中心长度，其长度测量不确定度达到（0.02 0.2L)μm。文中介绍了其工作原理、测量不确定度分析，给出了量块测量的验证数据。     

Convex shaping process simulation during counter-rotating electrochemical machining by using the finite element method

In counter-rotating electrochemical machining(CRECM), a revolving cathode tool with hollow windows of various shapes is used to fabricate convex structures on a revolving part. During this process, the anode workpiece and the cathode tool rotate relative to each other at the same rotation speed. In contrast to the conventional schemes of ECM machining with linear motion of a block tool electrode, this scheme of ECM is unique, and has not been adequately studied yet. In this paper, the finite element method(FEM) is used to simulate the anode shaping process during CRECM, and the simulation process which involves a meshing model, a moving boundary,and a simulation algorithm is described. The simulated anode profiles of the convex structure at different processing times show that the CRECM process can be used to fabricate convex structures of various shapes with different heights. Besides, the variation of the inter-electrode gap indicates that this process can also reach a relative equilibrium state like that in conventional ECM. A rectangular convex and a circular convex are successfully fabricated on revolving parts. The experimental results indicate relatively good agreement with the simulation results. The proposed simulation process is valid for convex shaping prediction and feasibility studies as well.     

碳纳米管接触电阻的研究进展

与金属之间过高的接触电阻是影响碳纳米管在微纳电子器件中应用的关键因素之一,本文从形成机理和改善方法两个方面综述了近年来碳纳米管接触电阻的研究进展。介绍了利用第一性原理对碳纳米管与金属界面电子输运性能的理论研究,以及金属功函数对界面势垒调试作用的实验研究。研究表明金属与碳纳米管之间具有较弱的杂化作用和较长的接触长度时,接触电阻较小;金属与碳纳米管功函数越接近,势垒高度越低。阐述了超声焊接技术、高温退火法、金属沉积法、局部焦耳热法等常用降低碳纳米管接触电阻方法的作用机理,并分析了这些方法对器件性能的改善作用。其中局部焦耳热法操作简单、易于自动化、对器件损害小、成本低,是目前比较理想的降低碳纳米管接触电阻的方法。     

如何提高大学生人际交往能力

人际交往能力是大学生综合能力的重要方面，本文针对我院大学生实际情况，提出我院大学生应如何加强人际交往能力的提高。     

闭式叶盘叶身加工切触点规划算法研究与实现

在对闭式整体叶盘叶身造型方法分析的基础上,提出基于叶片防扭曲高质量造型的等误差切触点规划算法,详细描述了算法中边界参数点确定、切削行参数划分、走刀步长确定和型值点网格化四个步骤,给出了该算法在UGCAD系统中的实现及工程应用实例。