载人航天器系统防操作失误设计分析

载人航天中任何人为操作错误都会对载人航天器系统和航天员的安全构成威胁。文章对载人航天器系统中人的操作特点进行了论述,并对保证载人航天器安全而进行的防操作失误设计问题进行了探讨。在此基础上,提出了进行载人航天器系统防操作失误设计的方法以及提高航天员操作可靠性的措施。     

激光捷联惯导系统角增量输入姿态算法

在对经典理想角增量输入的圆锥算法分析总结基础上,提出并推导了更为合适的经典角增量输入圆锥算法通式.在对经典理想角增量与实际工程滤波角增量的圆锥响应对比分析基础上,推导了滤波角增量输入圆锥补偿算法的补偿系数和误差主项通式.最后,利用文中讨论的理想角增量输入和滤波角增量输入圆锥补偿算法,结合激光陀螺惯性导航系统的频谱特性进行了大量的仿真验证.仿真结果表明,文中讨论的角增量圆锥算法有效,能显著提高激光陀螺捷联惯性导航系统的姿态精度.     

线性矩阵方程AXB－CXD＝E的误差界

首先讨论线性矩阵方程ＡＸＢ－ＣＸＤ＝Ｅ在有唯一解的条件下方程之解Ｘ的一个上界，再考虑系数矩阵Ａ，Ｂ，Ｃ，Ｄ，Ｅ发生小扰动时，线性矩阵方程（Ａ＋δＡ）Ｘ（Ｂ十δＢ）－（Ｃ＋δＣ）Ｘ（Ｄ＋δＤ）＝Ｅ＋δＥ之解Ｘ作为Ｘ的近似值的相对误差的一个上界。     

X-ray induced alterations in the differentiation and mineralization potential of murine preosteoblastic cells

To evaluate the effects of ionizing radiation (IR) on murine preosteoblastic cell differentiation, we directed OCT-1 cells to the osteoblastic lineage by treatment with a combination of β-glycerophosphate (β-GP), ascorbic acid (AA), and dexamethasone (Dex). In vitro mineralization was evaluated based on histochemical staining and quantification of the hydroxyapatite content of the extracellular bone matrix. Expression of mRNA encoding Runx2, transforming growth factor β1 (TGF-β1), osteocalcin (OCN), and p21^CDKN1A was analyzed. Exposure to IR reduced the growth rate and diminished cell survival of OCT-1 cells under standard conditions. Notably, calcium content analysis revealed that deposition of mineralized matrix increased significantly under osteogenic conditions after X-ray exposure in a time-dependent manner. In this study, higher radiation doses exert significant overall effects on TGF-β1, OCN, and p21^CDKN1A gene expression, suggesting that gene expression following X-ray treatment is affected in a dose-dependent manner. Additionally, we verified that Runx2 was suppressed within 24 h after irradiation at 2 and 4 Gy. Although further studies are required to verify the molecular mechanism, our observations strongly suggest that treatment with IR markedly alters the differentiation and mineralization process of preosteoblastic cells.     

绕月微卫星精确撞月轨道设计

为实现约束条件下的精准可控撞月,提出了基于Lambert问题的精确撞月轨道设计方法。通过求解Lambert问题,可得到撞月轨道轨控时刻的速度脉冲初值解,然后通过打靶法迭代得到撞月轨道的精确解。以"龙江二号"微卫星轨道为例,对撞月点经纬度的覆盖性,以及燃料约束下同一撞月点可行的轨控弧段进行全面分析。最后,通过月球南极水冰探测的撞月轨道设计案例,以验证本文提出的轨道设计方法的有效性。     

基于DEA的我国三大机场群效率分析

航班量的快速增长使得各机场不能以本机场的效率最大为目标进行发展,而应该立足于整个机场群,探索在整个机场群效率最大化的条件下进行各机场持续发展的方法.基于此,选择DEA方法对我国三大机场群的效率进行分析,以机场群效率最大为目标,分析各输入指标对机场的敏感性;分别对三大机场群的效率进行评价,对非DEA有效的机场进行投影分析,指出其具体的改进方向;对三大机场群整体的效率进行比较分析.     

某型航空发动机宽弦风扇叶片强度分析

针对某型航空发动机,考虑到离心力和气动力共同作用的影响,对该型发动机风扇叶片进行了有限元建模和强度分析,其中对气动力的加载进行了适当的简化。计算结果表明,该型叶片具有较高的静强度储备;应力集中区域在风扇叶片叶盆靠近叶根的区域,是叶片的几何形状以及离心力和气动力共同作用的结果。     

基于数据包络分析的民航发动机维修效果评价

对民航发动机维修效果进行评价可以为发动机承修厂的选择提供决策支持,同时有助于发现发动机承修厂的潜在问题。为了实现发动机维修效果的评价,首先提出了评价指标选择的原则,在此基础上给出了发动机维修效果评价指标体系,建立了基于数据包络分析的C2WH模型的发动机维修效果评价模型,并对模型的构建过程进行了描述。针对决策单元输入输出...     

Residual stress indentation model based on material equivalence

A novel residual stress indentation model for conical indentation loading is proposed to describe the relationship between the residual stress, material constitutive parameters, load, and displacement for materials with a uniaxial constitutive relationship that obeys Hollomon’s power law (H-law). The novel model was established based on the principle that the equivalent material without residual stress corresponds to the original material with residual stress, conical indentation theoretical model based on energy density equivalence, and an assumed power-law relationship between the dimensionless residual stress and relative difference of the yield stresses of the equivalent material and original material. Sixty imaginary H-law materials with ten equibiaxial and ten uniaxial residual stresses were investigated by Finite Element Analysis (FEA). The residual stresses predicted by the novel model from the indentation load–displacement curves simulated for the imaginary materials are in close agreement with those applied by the FEA. Finally, indentation tests for Cr12MoV steel, 45 steel, and 6061-T6511 aluminum alloy were carried out on their specimens without residual stress and their bending specimens with equibiaxial and uniaxial residual stresses. The residual stresses predicted by the novel model according to the indentation load–displacement test curves are in good agreement with those applied by the tests.     

推进剂贮箱金属焊接件疲劳裂纹对应力强度因子影响的数值分析

卫星推进剂贮箱的焊接质量直接影响卫星的寿命和可靠性。文章通过仿真分析研究焊接残余应力对贮箱上已存在裂纹的影响。首先针对球壳模型和平板模型分别计算焊接残余应力,然后在应力强度值最大的危险区域引入裂纹,对不同角度和尺寸系数的裂纹对应力强度因子影响的数值和变化趋势进行分析。研究表明：起主要作用的是应力强度因子KI;KII受角度影响相对较大;KI和KII的最小值都在裂纹中心处;KIII基本随归一化裂纹前沿数值增加而增加。