局部空间-时间显著性的表达过程蕴涵对空间显著性的表达

建立的基于独立成分分析进行特征提取器的学习,进而模拟人类对视觉信息的局部空间-时间显著性的表达过程的计算模型,蕴涵了对局部空间显著性的有效表达;从而当据其设计为机器人主动视觉的注意机制的视线控制而用的算法,可以同一个处理过程适用于动态场景或静态场景的情形。对获自动态场景的特征提取器的频率特性的分析,揭示了此种内在的包含性的成因;算法的实验结果显示了局部空间-时间显著性表达过程对静态场景的局部空间显著性可有效表达。     

捷联寻北仪的误差补偿技术及信号处理方法研究

捷联寻北仪采用中等精度两自由度动力调谐速率陀螺仪,来感测地球自转角速度在两个水平方向的分量,从而确定地理北向。各种干扰的存在会削弱有用信号,从而降低寻北精度。本文分析了陀螺静态及动态漂移误差对寻北精度的影响,提出了有效的误差补偿技术;针对有用信号的特点提出了简单实用的噪声消除法。仿真和试验结果说明,文中所提方法能有效地提高寻北精度。     

反求工程中经济型快速测量装置的研究

设计了结构简单经济实用的快速测量装置,采用分区域数据补偿方法进行误差补偿,提高了系统的测量精度,将有助于反求工程中测量效率的提高。     

Diamond wheel grinding characteristics of 3D orthogonal quartz fiber reinforced silica ceramic matrix composite

Fiber-reinforced silica ceramic matrix composites (SiO_2f/SiO₂) have gained extensive attention in recent years for its applications in aeronautics field such as radar radome and window. However, the machining properties and mechanism of the material remain unclear. The features and mechanical properties of the material itself have a significant influence on both its machining characteristics and surface integrity. Thus, a full-factor grinding experiment is conducted using a 3D orthogonal SiO_2f/SiO₂ aiming to obtain its machining characteristics. The effects of grinding parameters and tools on the grinding force, surface roughness, and material damage type are investigated using a dynamometer, Scanning Electron Microscope (SEM), and Acoustic Emission (AE) analysis. The AE frequency band is analyzed, and a semi-analytical force model is established to study the difference between a single grain and wheel grinding. It was found that the changes in surface roughness correlate with the changes in grinding force, with fiber fracture being the main reason behind the increase in grinding force. Finally, the material removal mechanism was studied based on the AE analysis. It was found that the removal mechanism is fiber fracture dominated with matrix crack and debonding, and the primary sources of energy consumption are fiber fracture and friction.     

Comprehensive outage compensation of real-time orbit and clock corrections with broadcast ephemeris for ambiguity-fixed precise point positioning

The main challenge in real-time precise point positioning (PPP) is that the data outages or large time lags in receiving precise orbit and clock corrections greatly degrade the continuity and real-time performance of PPP positioning. To solve this problem, instead of directly predicting orbit and clock corrections in previous researches, this paper presents an alternative approach of generating combined corrections including orbit error, satellite clock and receiver-related error with broadcast ephemeris. Using ambiguities and satellite fractional-cycle biases (FCBs) of previous epoch and the short-term predicted tropospheric delay through linear extrapolation model (LEM), combined corrections at current epoch are retrieved and weighted with multiple reference stations, and further broadcast to user for continuous enhanced positioning during outages of orbit and clock corrections. To validate the proposed method, two reference station network with different inter-station distance from National Geodetic Survey (NGS) network are used for experiments with six different time lags (i.e., 5 s, 10 s, 15 s, 30 s, 45 s and 60 s), and one set of data collected by unmanned aerial vehicle (UAV) is also used. The performance of LEM is investigated, and the troposphere prediction accuracy of low elevation (e.g., 10–20degrees) satellites has been improved by 44.1% to 79.0%. The average accuracy of combined corrections before and after LEM is used is improved by 12.5% to 77.3%. Without LEM, an accuracy of 2–3 cm can be maintained only in case of small time lags, while the accuracies with LEM are all better than 2 cm in case of different time lags. The performance of simulated kinematic PPP at user end is assessed in terms of positioning accuracy and epoch fix rate. In case of different time lags, after LEM is used, the average accuracy in horizontal direction is better than 3 cm, and the accuracy in up direction is better than 5 cm. At the same time, the epoch fix rate has also increased to varying degrees. The results of the UAV data show that in real kinematic environment, the proposed method can still maintain a positioning accuracy of several centimeters in case of 20 s time lag.     

基于分岔理论的起落架撑杆式锁机构设计

提出了运用分岔理论研究锁机构性能问题的分析方法，以前起落架上下位一体式锁机构为对象，基于分岔理论，通过数值延拓，研究了收放作动筒和解锁作动筒对该机构稳定性能的影响，阐释了锁机构运动分岔图中分岔点与上锁、解锁行为的对应关系，并分别针对上、下位解锁过程按照不同解锁力共划分了5种锁机构解锁状态。论述了延拓解锁、上锁分岔点得到的轨迹曲线，并根据曲线临界尖点定义了临界解锁力和临界解锁角度2个状态变量，随后分析了弹簧刚度、原长和安装点位置对以上变量的影响趋势。基于影响分析结果，在锁机构上锁能力一定的前提下，改变参数，优化了下位临界解锁力。研究表明，分岔分析能够快速全面地把握锁机构动力学特性随不同参数的变化趋势，在分析锁机构性能、指导参数初步设计方面有一定优势。     

旋转式重力梯度仪自身梯度补偿研究

重力梯度仪安装在惯性稳定平台上,忽略载体姿态角改变等条件下的影响,在空间上保持方向不变,因此载体相对于重力梯度仪的旋转会改变其周围空间的质量分布,从而引起自身梯度的变化.这种自身梯度变化影响了重力梯度仪的测量精度,是动基座重力梯度测量误差的重要来源.由于周围环境物体到重力梯度仪的距离很近,采用基于中心引力梯度的方法计算自身梯度具有较大误差.推导了基于加速度计输出的重力梯度仪自身梯度补偿方法.仿真结果表明通过基于中心引力梯度的方法和基于加速度计输出的方法分别计算单位质量的质量点产生的自身梯度时,0.3m位置处自身梯度补偿的偏差超过5E,采用基于加速度计输出的方法进行自身梯度补偿更加精确.     

充分发挥郑州航空港区扩散辐射作用的构想——基于增长极视角

2013年国务院批复了《郑州航空港经济综合实验区发展规划》（简称为郑州航空港区规划）之后,学界和政界开始更多地关注郑州航空港区这一增长极自身的集聚功能和经济增长,但怎样正确理解增长极的极化和扩散效应机理以及如何弱化它的负面影响、强化其扩散带动作用的研究成果并不多见。文章在研究增长极的极化扩散效应机理的基础上,提出以下强化郑州航空港区扩散辐射效应的建议：（1）以提高经济效率为主线,预防增长极过度膨胀;（2）掌握增长极辐射力衰减规律,边缘地区不能等着送“货”上门;（3）相对均衡的政策制度安排,有利于整个区域经济的协调发展;（4）加快腹地和落后地区的发展,为承接产业转移提供条件;（5）健全市场经济体制,畅通要素自由流动渠道;（6）调整产业结构趋同化,强化增长极的辐射带动效应。     

高负荷跨声速涡轮激波损失机理及控制技术研究

为了指导高性能、高负荷跨声速涡轮的设计,对其叶栅内的流场结构、尾缘波系结构、减小激波损失的机理及其控制技术进行了分析研究。结果表明:跨声速涡轮尾缘流场结构复杂,存在分离膨胀波、分离激波、基底区、再附激波、尾迹、吸力面反射波甚至激波边界层相互干扰等流动现象。通过采用收缩-扩张通道,喉道后采用直线型吸力面,减小吸力面尾缘弯折角、尾缘厚度和尾缘附近局部修型等措施,从而减弱激波强度,减小激波损失。     

某型燃气轮机封严盘疲劳裂纹机理分析

为了系统研究某型燃气轮机封严盘疲劳故障的现象、机理、特点和原因,进行了封严盘故障损伤痕迹、断口形貌、材料成分、金相组织等分析;同时进行了强度(应力)和模态振动特性方面的有限元计算研究,在此基础上进行了共振特性分析。分析结果表明:该封严盘结构设计存在薄弱环节,其均压孔孔边径向应力水平高,孔边表面状态不佳,在一定振动应力作用下,均压孔边容易产生高周性质的疲劳裂纹。对防止某型燃气轮机封严盘产生疲劳裂纹失效提出修理和使用中应控制的要点。