霍尔推力器等离子体羽流粒子模拟

建立了霍尔推力器羽流仿真模型,用单元粒子-直接模拟蒙特卡罗（PIC-DSMC）混合方法对SPT-7推力器的流场进行数值模拟,分析背压、扩张角和电子温度对流场的影响。结果表明：背压粒子增加了回流区内离子和高速粒子,加重羽流污染。SPT-70推力器羽流出口处扩张角约为30°。实验数据验证了仿真模型的正确和方法的可行,对电推力器及其羽流污染等的研究有一定的参考价值。     

红外热像仪防辐射罩冷挤压成形技术研究

星载红外热像仪防辐射罩为多台阶锥筒形薄壁零件,材料为较软的铅质材料,加工难度较大。为了解决加工成形的难题,对各种加工方法(切削、拉伸、旋压、冷挤压)进行了分析、对比和试验验证,最终采用冷挤压技术解决了防辐射罩加工成形的难题,而且加工成形的防辐射罩满足各项技术要求,加工成品率很高,材料消耗小,成本低,效果良好。     

Plasma Niobium Surface Alloying of Pure Titanium and its Oxidation at 900℃

A niobium-modified layer on pure titanium surface was obtained by means of double glow plasma surface alloying technique. The modified layer was uniform, continuous, compact and well adhered to the substrate. The niobium composition in the modified layer decreased gradually from the surface to the substrate. The oxidation behavior of the niobium-modified layer was investigated and com- pared with the untreated surface at 900 ℃ for 100 h. Characterization of the layers was performed using X-ray diffraction and scanning electron microscope, respectively. The test results show that the oxidation behavior of pure titanium was improved by niobium alloying process. Niobium has a positive influence on the oxidation resistance.     

Interplanetary Physics Research in China： 2006-2008

This brief report summarized the latest advances of the interplanetary physics research in China during the period of 2006-2007,made independently by Chinese space physicists and through international collaboration.The report covers all aspects of the interplanetary physics,including theoretical studies,numerical simulation and data analysis.     

Simultaneous investigation of magnetospheric plasma and spacecraft charging

The results of magnetospheric plasma fluxes measurement in geosynchronous orbit are presented. The measurements were done onboard the geosynchronous Russian “Electro” spacecraft (SC) in 1995–1997 years. The diurnal variations of the plasma density and temperature were observed at various levels of geomagnetic activity.     

RPC-MIP: the Mutual Impedance Probe of the Rosetta Plasma Consortium

The main objective of the Mutual Impedance Probe (MIP), part of the Rosetta Plasma Consortium (RPC), is to measure the electron density and temperature of Comet 67P/Churyumov-Gerasimenko’s coma, in particular inside the contact surface. Furthermore, MIP will determine the bulk velocity of the ionised outflowing atmosphere, define the spectral distribution of natural plasma waves, and monitor dust and gas activities around the nucleus. The MIP instrumentation consists of an electronics board for signal processing in the 7 kHz to 3.5 MHz range and a sensor unit of two receiving and two transmitting electrodes mounted on a 1-m long bar. In addition, the Langmuir probe of the RPC/LAP instrument that is at about 4 m from the MIP sensor can be used as a transmitter (in place of the MIP ones) and MIP as a receiver in order to have access to the density and temperature of plasmas at higher Debye lengths than those for which the MIP is originally designed.     

缓解航天器带电方法的研究

空间等离子体和航天器表面的相互作用常会导致航天器带电,造成危害。近年来,有人提出或试验了一些缓解的办法。文章对现有的缓解方法进行评论,讨论每一种方法的优缺点,并举SCATHA和DSCS卫星的例子对取得的结果加以说明。     

大气等离子加工系统设计及实验验证

建立了面向复杂光学表面的大气等离子抛光系统,并用该系统进行硅片表面加工的实验研究.研究了CF_4、SF_6两种气体的放电特性以及加工效果,得到了加工速率与功率,流量间的关系,并通过原子力显微镜观察了加工后的表面质量.     

等离子体合成射流的理论模型与重频激励特性

等离子体合成射流(PSJ)具有激励强度大、响应速度快等优点,在超声速流动控制领域应用前景广阔。鉴于此,基于传热学和气体动力学的相关理论,建立了考虑喉道内部气流惯性、腔体内外热交换以及吸气恢复阶段的PSJ全周期理论模型,实现了射流速度峰值时刻、吸气过程和振荡过程等关键特性的预测。基于该模型,分析了等离子体合成射流激励器的重复频率工作特点,研究了能量沉积、激励频率和射流孔径对于重频激励特性的影响。重频条件下,激励器存在过渡和稳定两种典型状态。过渡状态下,腔内平均温度不断升高、射流速度峰值逐渐增大。稳定状态下,腔内气体参数呈周期性变化。随着能量沉积和激励频率的增加,激励器腔体内壁温度、射流速度峰值和时均冲力均增加。受腔体材料耐温极限的制约,激励器存在安全工作的参数区间(SOA)。随着孔径的增加,SOA增大,但稳定工作状态下的射流速度峰值和射流持续时间减小。     

等离子体气动激励控制超声速边界层分离的实验研究

等离子体气动激励与超声速气流相互作用已成为高速流动控制领域的研究热点。激波与边界层相互作用现象广泛存在于超声速飞行器之中。本文进行了等离子体气动激励控制压缩角区和激波诱导边界层分离的实验,通过流场纹影显示和壁面静压测量,研究等离子体气动激励如何影响激波、激波如何影响边界层特性的科学问题。实验结果表明:施加毫秒量级表面电弧放电能够前移压缩角区的诱导斜激波,使分离区后移,分离区域增加,但激波强度减弱,流场总压增加;施加微秒量级表面电弧放电能够抑制激波诱导边界层分离,使分离区减小,流场总压减小。基于实验结果,认为毫秒量级表面电弧放电激励控制超声速气流的主要机理为放电过程的焦耳热效应;微秒量级表面电弧放电激励控制超声速气流的主要机理为焦耳热效应和冲击波效应共同作用。