Association of optical tracklets from a geosynchronous belt survey via the direct Bayesian admissible region approach

The direct Bayesian admissible region approach is an a priori state free measurement association and initial orbit determination technique for optical tracks. In this paper, we test a hybrid approach that appends a least squares estimator to the direct Bayesian method on measurements taken at the Zimmerwald Observatory of the Astronomical Institute at the University of Bern. Over half of the association pairs agreed with conventional geometric track correlation and least squares techniques. The remaining pairs cast light on the fundamental limits of conducting tracklet association based solely on dynamical and geometrical information.     

过滤式阴极电弧沉积类金刚石薄膜的特性分析

利用自行研制的过滤式阴极电弧沉积装置,在硅片和高速钢基体材料上获得了类金刚石薄膜,分别采用扫描电镜、原子力显微镜、喇曼光谱以及磨损实验等手段对薄膜进行了分析研究。结果表明,所获得的类金刚石薄膜为非晶态,sp3含量最高达70%;基体材料对成膜质量影响较大,在硅片上薄膜的摩擦系数可达0.08;同时偏压的变化会引起喇曼谱线中D峰和G峰位置向低频移动,半高宽σG增大、σD减小。     

基于数值的弧齿锥齿轮齿面啮合点位置分析的拟赫兹法

在已知弧齿锥齿轮齿面网格的条件下,分析了单齿啮合时弧齿锥齿轮齿面弹性变形对轮齿啮合点位置的影响。为此,首先形成一整套刚性齿面啮合点的数值计算方法;然后,采用赫兹接触理论计算齿面弹性变形,确定齿轮轮齿的微小转动及由此引起的啮合点位置的变动。将齿轮因齿面变形而产生微小转角,继而进行齿面啮合分析的过程定义为拟赫兹接触分析。结果表明,齿面弹性变形引起的齿轮轮齿的微小转动对啮合点的最终位置有一定的影响。      

不同壁温及差分格式下超燃冲压发动机的仿真

针对圆截面超燃冲压发动机相关实验进行数值仿真,采用了不同的壁面温度条件和差分格式,并探究其对仿真结果的影响规律。结果表明采用常用的绝热壁面边界条件会导致激波边界层交互位置处的回流区变大,进而导致流道收缩,壁面压力升高。采用高精度格式不仅不能更为精确地计算回流区的大小,反而会使回流区面积变得更大。通过改变壁面边界条件,采用300 K的等温壁面,可以使激波边界层交互位置处的回流区变得极小,使仿真结果与实验结果十分吻合。计算结果表明,针对当前构型与实验条件,盲目提高数值格式的精度并不一定会得到更好的结果,相反可能会使仿真与实验更加偏离,而适当修改壁面温度条件,即使数值格式精度较低,仍然可以得到很好的仿真结果。最后,针对与实验结果吻合的仿真结果,分析了圆截面超燃冲压发动机的流场特性,重点研究了凹腔剪切层及其质量交换特性。     

双馈异步风力发电机气隙偏心故障诊断研究现状与发展

双馈异步风力发电机(DFIG)机械故障在实际运行中尤其不可忽略,不论是转子刚度不足还是轴承磨损或安装误差,都会导致气隙偏心,严重时甚至会烧毁电机,因此对风机进行准确高效的气隙偏心故障诊断至关重要。简单介绍DFIG产生气隙偏心的故障机理,再对当前已有的相关故障诊断方法做重点归类阐述,最后展望未来的DFIG气隙偏心故障诊断方法的发展趋势和方向。     

Modeling and experiment of grinding wheel axial profiles based on gear hobs

Hobbing is one of the crucial gear manufacturing processes with high precision and high efficiency. In order to improve the accuracy of hobbing and hob relief grinding, more precise grinding wheels are demanded for relief grinding in the production of gear hobs. In this paper, a new and accurate mathematical method for calculating the axial profile of grinding wheel based on the corresponding gear hob to be ground is proposed. Considering that most researches have been conducted to focus on the optimization of hob geometric feature and only can be applied to a specific type of hand of helix and rake angle of gear hobs. The method in this paper can be served as a general algorithm for generating axial profile of grinding wheels on the basis of the spatial envelope theory, the principle of coordinate system transformation, and studies on normal profile of single-tooth. The accuracy of grinding hobs is based on applying the approach in practical manufacturing. Taking two typical different kinds of pre-grinding gear hobs as examples for calculation and experiment, the results of tooth profile errors strengthen the position that the validity and feasibility of this method, it can be employed for gear hob design and grinding processing.     

Spectroscopic data and Stark broadening of Cu I and Ag I spectral lines: Selection and analysis

Optical emission and linear laser absorption spectroscopy techniques were used in investigation of plasma with copper and silver admixture. The method of selection of spectral lines and spectroscopic data with the aim of diagnostics of multicomponent air plasma with two metal vapors admixture was developed. Energy level populations behavior on the Boltzmann plot were used for Cu I and Ag I spectroscopic data selection. In this way the selection of spectroscopic data for some of Cu I and Ag I lines was realized. Stark broadening parameters of Cu I and Ag I were examined. Experimentally obtained temperature and electron density radial distributions were used in the calculation of plasma composition in the assumption of local thermodynamic equilibrium. Linear laser absorption spectroscopy was used to examine the state of plasma.     

空间真空环境下密封电磁继电器的触点失效研究

密封电磁继电器有其固有的漏率,在应用于空间真空环境下由于气体泄漏使得其内部气体压力逐渐降低,导致继电器的触点在低气压环境下工作失效（负载切换时）。文章选择国产继电器样品对上述机理进行了试验验证,并对继电器内部气体压力与触点电弧失效的规律进行了研究。     

不同压比状态下超声速射流冲击斜板的声场/流场特性

为研究超声速射流冲击斜板的噪声特性及声源特性,针对不同压比下,超声速射流流场及声场分别进行了高频PIV（particle image velocimetry)测量与远场噪声测量。PIV测量结果可观测到激波格栅形成过程以及冲击斜板对它的影响。声场测量结果可捕捉到自由射流与冲击射流中不同的纯音频率随压比增加的转变过程。通过一一对比各纯音模态与流场模态,可区分各纯音模态的声源特性。结果表明:当压比在2.0~3.2之间时,共出现五种纯音模态:A模态纯音频率为剪切层大尺度涡脱落频率,此时流场呈现同轴模态;d模态和e模态中纯音频率主要为冲击纯音频率,且e模态出现时流场转化为螺旋模态,这是一种不稳定模态;当压比大于等于2.53时,纯音模态稳定成单一模态B,B模态纯音频率为啸叫频率,其流场结构转化回同轴模态,啸叫频率对斜板的存在与否不敏感;啸叫频率随着压比的增加逐渐减小,其二次谐频在基频幅值较小的方向上会出现一个强声波辐射。      

国内民航客运需求价格点弹性与弧弹性研究

采用微观经济学的点弹性和弧弹性理论,对国内民航客运需求价格弹性进行初步对比研究.结合民航客运的自身特点,提出适用于民航客运需求价格弹性的点弹性和弧弹性分析方法,并采用此方法对国内民航客运市场进行分析,得出国内民航整体市场是富于弹性的和旺盛需求的结论,最后给出点弹性与弧弹性对比.