以特殊角度攻击地面固定目标的圆周导引律

针对某些导弹以特殊角度攻击地面固定目标的任务要求,提出了一种仅利用视线角测量信息就能实现末速方向控制的圆周导引律。该导引律的基本思想在于控制导弹沿着一系列由导弹和目标的实时位置及要求的命中点角度所确定的圆弧飞行。利用简单的几何原理即可快速解算出各时刻所需要的速度倾角,并将其转换成制导指令。仿真结果表明,与典型的最优导引律相比,圆周导引律更适合于过顶迂回攻击的情况,且受制导周期的影响较小,但受制导指令时延的影响较大。     

弧齿锥齿轮齿面拓扑修形及加工参数计算

为了能够实现对齿面啮合性能的灵活控制,针对弧齿锥齿轮小轮提出一种齿面拓扑修形方法,即借助二阶曲面对齿面偏差拓扑的近似表达,将齿面拓扑修形分解为5个方向:螺旋角修正、压力角修正、齿长曲率修正、齿廓曲率修正及齿面挠率修正,通过改变5个方向的修形系数对小轮齿面拓扑结构进行自由控制。在此基础上,建立齿面偏差与机床加工参数之间的修正数学模型,通过构建敏感性矩阵并采用最小二乘法求解,反求出获得修形齿面的小轮加工参数,以便指导加工。以一对弧齿锥齿轮副为例进行修形啮合分析,仿真结果表明:选取齿长曲率修形系数为0.0001,齿廓曲率修形系数为0.0005,齿面挠率修形系数为0.0003,对齿面进行拓扑修形后传动误差幅值为-25.60″,接触迹线倾斜角度变为54.7°,相比原始结果啮合性能得到改善。滚检接触区与理论仿真结果一致,验证了修形方法的有效性。      

弧齿锥齿轮啮合迹方向角的主动设计方法

为了实现弧齿锥齿轮设计规定的啮合迹方向,以局部综合法为基础,结合轮齿接触分析技术和无约束优化方法,进行弧齿锥齿轮啮合迹方向角的主动设计,给出了1种实现齿面参考点处啮合迹目标方向角的设计方法。通过1对弧齿锥齿轮的实例演示,论证了该方法对弧齿锥齿轮啮合迹方向角进行主动设计的可行性。结果表明:局部综合法中的输入啮合迹方向角必须小于旋转轴平面中规定的角度;在调整啮合迹方向角的过程中,传动误差曲线没有发生畸变。     

基于海上无人值守的靶载终端结构系统研究

针对海洋恶劣环境,研究了一种适用于无人值守的靶载终端结构系统。通过建立靶载终端散热数学模型得到上下插齿式最优散热结构,提出了一种基于高度差的双层回旋式密封结构及方法。分析了靶载终端呼吸效应的产生机理及解决措施,研制了抗随机波载及抗冲击能力的缓冲振动平台,并且通过密封及振动冲击试验验证了靶载终端结构系统的可行性和准确性。为恶劣海洋环境下无人值守的靶载终端提供有力的技术保障,提高我国武器靶载终端作战水平。     

微阴极真空电弧点火起弧及加速机理研究综述

微阴极真空电弧推力器具有结构简单、重量轻、功耗低、比冲高等优点,因而在航天推进领域有着广阔应用前景.当前推力器设计研制、可靠性和寿命的提高等方面遇到的一些关键问题均与微阴极真空电弧放电过程的基本物理问题密切相关.对微阴极电弧推力器运行中涉及的电子发射、电极间起弧过程、阴极斑点形成及特点、烧蚀和形貌变化、电极间等离子体射...     

Evolution of periodic orbits near the Lagrangian point L2

A study of the evolution of the periodic and the quasi-periodic orbits near the Lagrangian point L₂, which is located to the right of the smaller primary on the line joining the primaries and whose distance from the more massive primary is greater than the distance between the primaries, in the framework of restricted three-body problem for the Sun–Jupiter, Earth–Moon (relatively large mass ratio) and Saturn–Titan (relatively small mass ratio) systems is made. Two families of periodic orbits around the smaller primary are identified using the Poincaré surface of section method – family I (initially elliptical, gradually becomes egg-shaped with the increase in the Jacobi constant C and elongated towards the more massive primary) and family II (initially egg-shaped orbits elongated towards L₂ and gradually becomes elliptical with the increase in C). The family I in the Sun–Jupiter and Saturn–Titan systems contains two separatrix caused by third-order and fourth-order resonances, while the Earth–Moon system has only one separatrix which is caused by third-order resonances. Also in the Sun–Jupiter and the Saturn–Titan systems, family I merge with family II, around Jacobian constant 3.0393 and 3.0163, respectively, while in the Earth–Moon system, family II evolves separately from two different branches. The two branches merge at C = 3.184515. In the Earth–Moon system, the family II contains a separatrix due to third-order resonances which is absent in the other two systems.     

铁基金刚石节块的热处理及其耐磨性能研究

首次提出了在烧结型金刚石工具的制造中引入热处理的新工艺，并系统地研究了淬火温度、淬火时间及回火温度等热处理工艺参数对热压烧结型铁基金刚石圆盘锯节块及其胎体材料机械性能的影响，同时对经热处理的铁基金刚石圆盘锯节块在石材旺苍红上进行磨损试验研究。试验结果表明，热压烧结型铁基金刚石圆盘锯节块胎体热处理的最佳工艺参数为：淬火温度为７６０～７９０℃、淬火时间为３．５ｍｉｎ、回火温度为２４５～３１５℃；经热处理后铁基金刚石圆盘锯胎体及节块的强度、硬度等机械性能有显著的提高，热处理也能明显改善铁基金刚石圆盘锯节块的耐磨性能。这说明将热处理工艺用于烧结型金刚石工具的制造中是切实可行的。     

Occurrence rate of SAR arcs during the 23rd solar activity cycle

The occurrence rate of SAR arcs during 1997–2007 has been analyzed based on the photometric observations at the Yakutsk meridian (Maimaga station, corrected geomagnetic coordinates: 57°N, 200°E). SAR arcs appeared in 114 cases (∼500 h) during ∼370 nights of observations (∼3170 h). The occurrence frequency of SAR arcs increases to 27% during the growth phase of solar activity and has a clearly defined maximum at a decline of cycle 23. The SAR arc registration probability corresponds to the variations in geomagnetic activity in this solar cycle. The dates, intervals of UT, and geomagnetic latitudes of SAR arc observations at the Yakutsk meridian are presented.     

基于连续同伦算法的天基仅测角初定轨方法

要进一步提高天基短弧初定轨的精度,在观测资料精度较高的情况下,仅考虑二体问题是不够的,还应考虑轨道摄动的影响。因此,基于无摄初轨的单位矢量法原理和矢量斜分解方法,给出了考虑摄动的天基仅测角初定轨单位矢量法。针对天基仅测角观测条件方程组求解过程中易出现迭代不收敛或收敛到平凡解的问题,引入连续同伦算法求解观测条件方程组,提出了单星观测方式下的空间目标天基仅测角初定轨方法,并通过数值仿真算例验证了该算法在较大范围的收敛性和数值稳定性。     

圆锥形薄壁壳体的弹性稳定性

基于Donnell型扁壳理论,利用法分析了在均布外压作用下圆锥形薄壁壳体的弹性稳定性问题。根据外压实验观察结果和通过选取适当的位移分量表达式,文中给出了临界外压的近似表达式。数值结果表明,本文理论分析预示值与临界载荷的实验值很吻合。文中还对有关参数对临界载荷的影响进行了讨论。本文所得结果可供工程应用参考。