SMA鼓包迟滞建模与控制策略

激波控制鼓包SCB是一种减小激波阻力的流动控制技术。为了解决固定挠度鼓包工作范围较窄的问题,提出了一种具有双向记忆效应的形状记忆合金SMA鼓包,通过控制SMA鼓包的温度来改变其挠度。SMA鼓包最大可回复位移为6.1 mm,为鼓包变形区域的2.65%。针对迟滞现象对鼓包挠度控制的影响,基于（Krasnosel'skii-Pokrovskii,KP）模型对SMA鼓包的温度/挠度迟滞特性进行了建模研究。采用粒子群算法来辨识模型参数,辨识得到的迟滞模型最大误差为0.107 mm。设计了2种基于KP模型的PID控制方案,一种为无迟滞补偿的单目标PID控制,一种为迟滞逆模型前馈补偿的双目标PID控制。仿真与实验结果表明,迟滞逆模型前馈补偿的双目标PID控制时域性能优于无迟滞补偿的单目标PID控制。     

进口形状对内转式进气道的起动特性影响

为了研究进口形状对高超声速内转式进气道低马赫数起动特性的影响,设计了分别具有矩形、正方形、椭圆形、圆形进口形状的4个进气道,然后利用仿真方法对其不起动/再起动流场结构进行了分析.结果表明:矩形和椭圆形进口进气道的再起动马赫数相近,正方形和圆形进口进气道的再起动马赫数相近,且后两者的再起动马赫数偏高.进一步分析发现,再起动能力的差异可能是由进口的宽高比不同所导致,因此设计了不同宽高比系列的进气道,并对其不起动/再起动流场结构进行了研究.结果表明:进口宽高比对进气道起动性能具有显著影响,在一定范围内宽高比越大,其再起动能力越强.      

基于片上网络的路由模型研究

主要探讨了片上系统网络目前的发展状况和趋势,研究了片上网络模型的拓扑结构和通信方式以及功耗.着重设计了一个片上网络的路由器模型.此路由器基于2D Mesh网络,有简洁,高效的特点.     

Enhanced ultrasonic total focusing imaging of CFRP corner with ray theory-based homogenization technique

Ultrasonic testing is effective in defect characterization and quality assurance of Carbon Fiber Reinforced Plastic (CFRP) components in the aerospace industry. Due to the coupling between complex shape and elastic anisotropy, the Phased Array Ultrasonic Testing (PAUT) and time-based Total Focusing Method (TFM) face significant challenges in the calculation of wave propagation. A wave velocity distribution model is established for a multidirectional convex corner of CFRP based on a homogenization theory and the above coupling effects are also incorporated. A ray-tracing method is proposed based on Dijkstra’s shortest path search algorithm. The predicted time of flight ensures that this technique, the homogenized TFM, could synthesize a high-quality focused image by post-processing on the full matrix capture data. Experiments on a laminate with three ?1.5 mm Side-Drilled Holes (SDHs) in different circumferential directions confirm a successful homogenized TFM imaging that all SDHs can be effectively detected. As compared to the isotropic scenario, the maximum positioning error is reduced to 0.12, 0.08, and 0.38 mm, and the Signal-to-Noise Ratios (SNRs) are increased by 2.1, 1.1, and 11.8 dB, respectively. It is suggested that the ray-tracing assisted TFM technique can effectively improve the imaging of corners in CFRP components.     

大展弦比飞翼结构形状、尺寸综合优化设计

为了降低无人机机翼的结构重量,对某型大展弦比复合材料飞翼结构进行了形状与尺寸综合优化设计。在形状优化层次重点考虑主承力元件翼梁的位置,尺寸优化主要考虑各元件的几何尺寸。采用NASTRAN进行尺寸优化,并将优化结果作为复合形法进行形状优化迭代的根据。最后对整个结构的优化结果进行了详细有效的分析,可以看出,优化结果符合结构受力特点,减重效果明显。     

表面组装技术的应用与发展（下）

本文主要对表面组装技术的特点、表面组装工艺和表面组装技术的现状及发展趋势进行了全面的介绍，并分析了贴片机、网板印刷机、回流焊、波峰焊对表面组装工艺的影响。     

Studies of polar mesosphere summer echoes with the EISCAT VHF and UHF radars: Information contained in the spectral shape

The nature of PMSE in the VHF and UHF frequency range is considered taking into account the shape of corresponding Doppler spectra. Assuming a turbulence-based model of PMSE it is argued that for cases where a VHF radar detects strong PMSE, the UHF radar could either detect enhanced coherent scattering caused by the same physical process as in the VHF (i.e., turbulence with large charged ice particles), there could be incoherent scattering modified by the charged ice particles, or there could be a mixture of both. In order to distinguish these cases a simple but robust method is introduced to characterize the shape of the Doppler spectra derived from observations at both frequencies. Spectral shapes are quantified with one simple fitting parameter of a generalized fit to the autocorrelation function (=Fourier transform of the Doppler spectrum). This parameter takes a value of 1 for a Lorentzian spectrum indicative of pure incoherent scatter from the D-region, a value of 2 for coherent scatter owing to turbulence, and a value of less than 1 for incoherent scatter modified by the presence of charged aerosol particles. This method is applicable to observations at altitudes between ∼70 and ∼90 km. Simultaneous observations with the EISCAT VHF and UHF radar are presented in which all three cases mentioned above are identified. For the case of incoherent scatter modified by the presence of charged aerosol particles we quantify the radius of the involved ice particles to exceed ∼5 nm. Most importantly, however, for the case where the UHF-signal exceeded the incoherent scatter signal significantly, the spectrum revealed a clear Gaussian shape indicative of a coherent scattering process with identical spectral width as for the VHF-observations. This finding gives strong support that both echoes are created by the same turbulence-based mechanism and not by different mechanisms as speculated by several previous authors.     

TDC-GP1器件单粒子锁定效应的脉冲激光模拟试验研究

文章介绍了单粒子锁定效应脉冲激光模拟试验的工作原理。以时间测量芯片TDC-GP1为试验对象,利用单粒子锁定模拟试验设备开展了无限流保护电阻和有限流保护电阻的单粒子锁定效应脉冲激光模拟试验研究。结果发现:TCD-GP1芯片在20 nJ脉冲激光辐照下发生了单粒子锁定现象。在对照试验中发现,有限流保护电阻的情况下,在发生锁定时不仅能降低锁定大电流和供电电压,而且还能有效地避免器件的功能损伤。     

航天器大尺度部件折叠展开原理分析及应用

围绕航天器向大尺度、远距离发展所涉及的大尺度部件在轨展开技术中新工艺、新材料、新结构等,对现有航天器大尺度部件的折展机构进行了统计与分析,系统梳理了在轨航天器折展机构的技术参数、结构与组成等。介绍了折纸艺术、自回弹材料与记忆合金等新工艺、新材料在航天器太阳帆板、天线等大尺度部件上的应用。重点分析并梳理了新型结构的特性及其工作原理,包括：充气展开式、单轴旋转式、径向扩展式、单元重构式、延长伸展式等。最后,结合即将开展的载人登月与月球基地建设、太阳系探测等深空探测任务,对在轨航天器大尺度部件的折展结构与机构的发展趋势进行了展望。     

自由边界抛物薄壳的模态振型函数

基于membrane理论,推导出一组完全满足抛物薄壳自由边界条件的模态振型函数.通过模态分析实验得到自由边界抛物薄壳的低阶模态实验振型,将实验振型与有限元分析振型及依据模态振型函数所得到的理论振型进行对比,三者能够较好的吻合,表明所推导的模态振型函数可正确描述抛物薄壳的模态形状.