小展弦比飞翼布局作战飞机垂直面机动性研究

比较分析了某小展弦比飞翼布局作战飞机与典型的常规布局战斗机F16在亚、跨、超声速范围的气动特性,相对而言,飞翼布局飞机具有较大的升阻比和较低的翼载荷.计算并分析了该飞翼布局作战飞机与F16在垂直机动面内的平飞加速性能和跃升性能,得到了由于布局和气动特性不同引起的飞翼布局作战飞机机动性的新特点.研究结果对飞翼布局作战飞机的设计和作战使用均具有一定的参考意义.     

点火瞬态过程仿真模型参数辨识

建立了固体火箭发动机点火瞬态过程一维非定常流场仿真模型,采用系统辨识方法进行了模型参数不确定性研究。基于点火试验用缩比发动机试验结果,得到了传热模型参数和瞬态燃速模型参数的最优估计,提高了点火瞬态过程一维仿真模型的预估精度。采用近似方法,构建Kriging近似函数,有效解决了一维非定常流场仿真的计算复杂性问题。     

结冰对民用飞机飞行性能的影响分析

在获取民用飞机适航合格审定证明前,必须通过飞行试验,并在试验中演示验证民用飞机能在CCAR25部附录C确定的连续和间断的最大结冰状态下安全运行。基于此背景,计算并得到某型机两种构型在45min待机冰型下的飞行性能,与无冰状态下对应构型的飞行性能进行对比分析。结果表明,结冰对飞机的飞行性能具有较大的影响。     

一种基于冗余测量的自适应卡尔曼滤波算法

针对目前自适应滤波算法的不足,在测量系统量测噪声方差未知的情况下,设计了一种基于冗余测量的自适应卡尔曼滤波(RMAKF)算法。通过对系统冗余测量值的一阶、二阶差分序列进行有效的统计分析,可以准确估计系统量测噪声统计特性,进而在滤波过程中自适应调节噪声方差阵R,提高滤波精度。以全球定位系统/惯性导航系统(GPS/INS)松组合导航系统为对象进行了仿真实验,结果表明该算法在测量系统噪声特性未知或发生改变时,可对其进行准确估计,在采用低精度惯性器件情况下,滤波结果较其他主要自适应卡尔曼滤波算法有较明显的改进。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

某型国产发动机压力传感器故障分析

从某型国产涡轴发动机压力传感器基本组成和工作原理出发,针对故障现象和特点,开展故障原因分析,得出了相应的结论,并提出了改进的合理建议,有利于提高发动机的可靠性。     

基于功能危险性评估的民用飞机驾驶舱门设计探讨

FAA分别于2002年和2008年颁布25-106及25-127修正案,增加驾驶舱门安保事项以提高驾驶舱的安全水平。修正案要求加固驾驶舱门,驾驶舱门必须设计成可以阻止未被授权人员进入驾驶舱并且阻碍危险物体射入以保证机组人员的安全。驾驶舱门必须能检测驾驶舱失压并可以释放门或者卸压板平衡压力差,还应有措施使飞机机组成员在该舱门卡住的情况下能直接从驾驶舱进入客舱。因此,在驾驶舱门上设有一个可以快速释放的紧急出口。根据飞机驾驶舱门结构及功能的主要特点,对驾驶舱门功能故障进行探讨,同时对功能故障引发的危险性等级进行划分,以确定安全指标,进而辅助驾驶舱门设计工作。     

变任务混频寿命相关载荷累积量分布特性

在基于固定任务混频的寿命相关载荷累积量分布特性研究成果的基础上,推导了变任务混频条件下的寿命相关载荷累积量分布特性,结果表明:变任务混频的载荷参数累加量分布函数也是趋于正态分布.并采用数值方法模拟实际飞行过程中变任务混频条件下寿命相关载荷的累积过程,模拟结果和理论结果吻合良好,进一步验证了分析结果的正确性.该结果可用于变任务混频下的寿命可靠性预测.      

基于密度权重的可靠性灵敏度分析方法

为了提高可靠性灵敏度求解数字模拟法的效率,提出了一种变量空间确定性低偏差均匀抽样与样本点处联合概率密度函数构造权重相结合的方法,来估计可靠性灵敏度。该方法通过均匀样本点处联合概率密度函数的权重保证了可靠性灵敏度的估计值收敛于真值,而由低偏差抽样代替原问题中的联合概率密度抽样则可以保证更低的误差阶以及在小失效概率条件下抽得的样本有更高的可能性落入失效域,从而保证了所提方法具有更高的收敛速度。另外,所提方法可以采用与独立变量相同的步骤来估计相关变量情况下的可靠性灵敏度,计算简便,适用范围广。算例充分证明了所提方法的优越性。