Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

航空发动机PC取证信息管理系统模型研究

针对航空发动机制造企业生产许可取证组织混乱、业务繁杂、信息庞大复杂且联系弱、取证流程不清晰等问题,在深入研究生产许可(PC)取证工作和适航法规的基础上,以航空发动机生产许可审定为对象,结合丰田企业精益生产管理理念,并参照基于产品全生命周期管理PLM、企业资源管理ERP、生产管控等系统,实现了生产许可审定组织模型、业务模型、流程模型和系统模型的集成构建,研究和开发了具有实用价值的航空发动机生产许可审定信息管理系统模型,极大方便了企业构建适航取证系统,加快适航取证步伐,提高工作效率.     

基于径向基函数与混合背景网格的动态网格变形方法

发展了一种基于径向基函数(RBF)插值和混合背景网格映射的动态网格变形方法。混合背景网格由运动物面附近的各向异性网格和偏离运动物面的各向同性网格组成。物面变形或运动后,包含在各向异性背景网格中的所有物面网格点的位移由指定的物面运动规律得到,而各向同性背景网格点的位移通过径向基函数插值获得。然后变形后的计算网格利用计算网格与混合背景网格之间固定的映射关系代数插值得到。各向同性网格距离物面一定的距离,消除了物面保形对径向基函数插值的要求,从而可以减少径向基函数基点的数量,以提高插值的效率和可靠性。最后,通过二维和三维算例对该方法的变形网格质量、参数影响、网格拓扑依赖性、复杂外形变形能力及网格变形效率进行了测试。测试结果表明,该方法能够高效生成大变形下高质量的变形网格。     

基于RBF带学习能力高精度非线性FDD设计

在轨航天器故障检测与诊断问题需要面对模型的非线性,而且要求尽量提高其检测的精度,为此设计了基于径向基函数（RBF）神经网络的动量轮非线性故障检测与诊断（FDD）方案。首先应用RBF补偿建模误差,提高检测精度,并选择李雅普诺夫函数证明其收敛性;然后应用非线性观测器来产生故障残差,给出了阈值以及故障检测的时间;应用RBF网络对故障信号进行重构,并据此设计了带学习能力的FDD策略。再次建立了详细的动量轮模型,通过不同条件下的仿真研究分别验证残差的阈值特性、时间特性以及RBF的重构能力,仿真结果表明了算法的有效性。     

高超声速飞行器预设性能反演控制方法设计

为解决吸气式高超声速飞行器的飞行控制问题,提出了一种新型预设性能神经反演控制器设计方法。通过构造预设性能函数,保证速度跟踪误差和高度跟踪误差能够按照预设的收敛速度、超调量及稳态误差收敛至期望的区域,同时满足系统预设的瞬态性能和稳态精度。在反演控制设计结构下,引入径向基函数（RBF）神经网络对模型未知函数及不确定项进行逼近,提高了控制系统的鲁棒性。引入的RBF神经网络中仅有一个参数需要在线更新,有效提高了控制准确性,避免了通常反演控制方法中经常出现的"微分膨胀问题",并降低了计算量。通过仿真实验验证了所设计控制系统的有效性和可行性。      

正规基上的快速乘逆算法

根据有限域GF(2~m)上的正规基表示,本文提出一种新的快速乘逆算法。该算法把计算乘逆的复杂忭从O(m)降低到O(1/m)。     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

Using the radial basis function neural network to predict ionospheric critical frequency of F2 layer over Wuhan

Neural networks (NNs) have been applied to ionospheric predictions recently. This paper uses radial basis function neural network (RBF-NN) to forecast hourly values of the ionospheric F₂ layer critical frequency(f_oF₂), over Wuhan (30.5N, 114.3E), China. The false nearest neighbor method is used to determine the embedding dimension, and the principal component analysis (PCA) is used to reduce noise and dimension. The whole study is based on a sample of about 26,000 observations of f_oF₂ with 1-h time resolution, derived during the period from January 1981 to December 1983. The performance of RBF-NN is estimated by calculating the normalized root-mean-squared (NRMSE) error, and its results show that short-term predictions of f_oF₂ are improved.     

民用飞机货舱烟雾探测系统研究

货舱烟雾探测系统作为飞机探测系统的重要组成部分,对货舱的烟雾或火情状况进行探测、监控和告警。介绍了民用飞机货舱烟雾探测系统的组成,对两种常用的货舱烟雾探测器的类型进行了对比分析;对货舱烟雾探测的相关条款进行了分析说明;对货舱烟雾探测系统设备级试验、系统级试验和机上试验进行了详细的介绍;针对烟雾探测系统当前存在的设计难点和适航验证试验,提出了新的研究方法。