有线电视HFC网络与光纤链路设计

本文论述了双向传输有线电视ＨＦＣ网络结构并比较了其优缺点，文中还就工程应用的实例讨论了光纤链路的设计问题。     

一种先进复合材料件无损检测的探讨

一种先进复合材料受力件的制品,如何检测内部是否有分层脱胶,曾遇到很大的困难。本文阐述如何结合实际解决这一难题,从而免受重大损失。     

化学气相沉积/渗透技术综述

综述了化学气相沉积技术的最新发展，包括金属有机化合物化学气相沉积，等离子辅助化学气相沉积，激光化学气相沉积；同时介绍了三种用于制备工程材料的快速致密化化学气相渗透技术，包括强迫流动热梯度化学气相渗透，化学液相沉积，感应加热热梯度快速致密化技术。     

酚醛树脂炭的合成及力学性能研究

为了表征多孔炭泡沫材料基体的结构与力学性能,采用碱催化法制备热固性酚醛树脂,经固化、高温炭化处理合成多孔炭泡沫材料的基体——酚醛树脂炭。研究酚醛树脂炭的微观结构、压缩强度及压缩断裂韧性。结果表明:酚醛树脂炭结构以树脂炭基体、微孔和微裂纹为主,其碳元素以sp3杂化的非晶炭形式存在;压缩强度为8.58 MPa,压缩断裂特征为脆性断裂模式;酚醛树脂炭的压缩断裂韧性较差,断裂过程中吸收的总能量为0.135 MJ/m3。     

改进层次聚类法在复合材料敲击检测中的应用

伴随复合材料的迅速发展,其在航空航天方面的应用也日益普遍,但因复合材料的各向异性,在制造过程中会导致某些缺陷的产生。敲击检测作为一种实时原位的无损检测,在复合材料的检测中效果明显。由于敲击检测尚未找到合理的数据处理方法,所以其应用范围受到限制。从解决敲击检测数据处理方法的角度出发,提出将改进层次聚类法应用于敲击检测中,并在应用实例环节对该方法进行了应用,通过实验结果对比,表明改进层次聚类方法可以解决敲击检测数据处理的问题。     

Fabrication of Diamond-like Carbon Films by Ion Assisted Middle Frequency Unbalanced Magnetron Sputtering

Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.     

化学气相反应法在C/C复合材料抗氧化处理中的应用

通过把硅蒸气渗入预制体孔隙与碳直接反应生成SiC的化学气相反应(CVR)方法,提高初始密度和预制体结构均不同的C／C复合材料的抗氧化能力,研究了C／C复合材料的密度变化与微观结构,并对其进行了氧化试验。结果表明,因CVR温度、C／C复合材料初始密度不同,抗氧化处理后的密度增加量有显著不同。针刺炭布C／C／SiC复合材料在马福炉中于1160℃经65min氧化后,其失重率仅2．6％,而密度为1．95g／cm^3的同结构C／C复合材料相在同条件下失重率高达32％。     

Methane pyrolysis in preparation of pyrolytic carbon: Thermodynamic and kinetic analysis by density functional theory

The density functional theory has been successfully applied in analyzing pyrolytic carbon deposition by methane pyrolysis from the view of thermodynamics and kinetics based on a total number of 39 elementary reactions. M06-2X/def2-TZVP level was employed to optimize species structures and locate the transition states. The enthalpy changes and Gibbs free energy changes of all the reactions in the temperature range of 298.15–1800 K were derived with optimized species. Results show that the reacting temperature should be above 1200 K based on the equilibrium constant analysis, which is consistent with the typical reaction temperature adopted in experiments. Potential energy surface profiles report that radical attacking reactions have lower energy barriers than those direct decomposition reactions, especially hydrogen radical attacking reactions. The energy barriers of the first steps, dehydrogenations of methane and ethylene, are 272.4 kJ·mol⁻¹ and 288.9 kJ·mol⁻¹ at 1200 K, which are very close to the experimental activation energy for methane pyrolysis. The most favorable decomposition reaction path is the path of hydrogen radical attacking reactions. The highest energy barrier of the path at 1200 K is 185.7 kJ·mol⁻¹ presented by the C–H bond breaking in ethynyl attacked by hydrogen radical.     

基于时标分解的弹性高超声速飞行器智能控制

考虑弹性高超声速飞行器纵向动力学模型，提出了一种基于时标分解的智能控制方法。考虑刚体状态和弹性模态具有不同的时标特性，采用奇异摄动理论进行快慢时标分解，将模型转换为刚体慢变子系统和弹性快变子系统。针对刚体子系统考虑动力学不确定，基于平行估计模型构造表征不确定逼近效果的预测误差，结合跟踪误差给出复合学习控制策略。针对弹性子系统设计自适应滑模控制稳定弹性模态。通过李雅普诺夫稳定性分析可证系统状态一致终值有界。仿真表明所提出的控制方法能够实现刚弹模态的稳定收敛，且具有更高的跟踪精度、更好的学习性能和更快的收敛速度。