中间件技术的研究及应用

本文在分析了分布式应用系统体系结构发展变化的基础上．阐述了中间件的概念、功能和在可重用、多异构数据源应用系统的作用，对ODBC、BDE／IDAPIT、0LEDB／ADO和JDBC等分布式数据库中间件；CGI、lSAPI／NSAPI、ASP、JSP等中间件进行了分析比较，并给出了中间件技术在教务管理信息系统的应用实例。     

芳纶复合材料用湿法环氧配方的研究

在综合考虑粘度，力学性能和储存期的基础上，研制了以混合芳香胺为固化剂的芳纶用湿法环氧配方， 注浇体力学与俄，美等国家湿法环配方及我国高性能干法配方性能相当，实验证明该湿法环氧配方与Ｆ－１２纤维浸润性及界面粘接性能均较高，其ＮＯＬ环强度转化率均达８７％。     

规则回转体自动铺丝轨迹规划与丝束增减

为满足自动铺丝轨迹的满铺覆性要求，针对现阶段自动铺丝轨迹规划存在的不足，提出了不同的丝束增减算法。首先讨论纤维铺放方向的确定和中心轨迹数量的计算，设计不同铺放方向轨迹的生成算法。然后以丝束重叠系数为重要参数，对于纤维局部堆积和空缺问题提出单侧纤维裁剪算法和双侧纤维裁剪算法，并对裁剪后的重叠区域和间隙区域进行面积求解，使得纤维丝束均匀覆于芯模表面。最后基于CATIA CAA二次开发平台，将上述算法集成到纤维铺放CAD系统中，通过运动仿真系统验证算法的正确性。利用提出的丝束增减算法，实现了间隙/重叠区的均匀分布，尽量降低了富树脂区等相关缺陷的聚集对性能的不良影响。     

Crew autonomy for deep space exploration: Lessons from the Antarctic Search for Meteorites

Future piloted missions to explore asteroids, Mars, and other targets beyond the Moon will experience strict limitations on communication between vehicles in space and control centers on Earth. These limitations will require crews to operate with greater autonomy than any past space mission has demonstrated. The Antarctic Search for Meteorites (ANSMET) project, which regularly sends small teams of researchers to remote parts of the southern continent, resembles a space mission in many ways but does not rely upon a control center. It provides a useful crew autonomy model for planners of future deep space exploration missions. In contrast to current space missions, ANSMET gives the crew the authority to adjust competing work priorities, task assignments, and daily schedules; allows the crew to be the primary monitor of mission progress; demands greater crew accountability for operational errors; requires the crew to make the most of limited communication bandwidth; adopts systems designed for simple operation and failure recovery; and grants the crew a leading role in the selection and stowage of their equipment.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

三维角联锁结构复合材料等效弹性性能有限元分析

在复合材料承载时变形协调的前提下,采用CAD软件绘制三维织物单元体几何模型,然后导入结构分析有限元软件包,对工程中常用的带衬经三维角联锁结构复合材料的弹性性能进行分析,并将0°和90°方向弹性性能预测值及实验值与取向平均法预测值进行比较。结果表明,采用的有限元方法所得预测值及实验值与取向平均法预测值之间具有很好的一致性。     

PP／SCF复合材料的制备和力学性能的研究

本文制备了聚丙烯（PP）／,短炭纤维（SCF）复合材料并研究了其力学性能。结果表明,复合材料的拉伸强度随SCF含量的增加有先增加后趋于稳定的趋势,当SCF含量达到6％时,拉伸强度达到极值。随着SCF的加入,冲击强度呈先增加后略有降低的趋势,复合材料在SCF含量为6％时冲击强度达到极值。由此可知,适量的加入SCF对PP起到了较好的增强增韧效果。     

一种双钟型喷管液氧/甲烷发动机系统方案

根据双钟型喷管高度补偿特点及技术研究现状,提出了一种双钟型喷管液氧甲烷发动机系统方案,进行了双钟型喷管基弧段及延伸段面积比优化,并与其他系统方案进行了性能对比分析。研究表明,对于地面起动的芯级发动机,采用双钟型喷管是提高发动机综合比冲性能以及运载器有效载荷的有效途径。     

载人航天器空气环境参数控制非定常仿真分析

为支持乘员在轨驻留,载人航天器需通过空气环境控制系统将众多设计参数和空气环境参数控制在指标范围内。文章建立了一种载人航天器空气环境非定常控制仿真分析模型,包括舱体模块、航天员模块、舱压控制模块、温湿度控制模块以及CO2净化模块。利用该模型分析了载人航天器空气环境参数随乘员代谢水平的非定常变化趋势,并评估了控制系统的工作性能。结果表明:乘员代谢水平变化对空气环境参数有显著影响,通过调节控制系统运行参数可将各空气参数控制在有效指标范围内。人区温度与O2分压、CO2分压和人区湿度有密切的影响关系,不可孤立地进行分析。为载人航天器空气环境参数控制系统的设计和流程改进提供了依据。     

微纳米尺度流动实验研究的问题与进展

微纳米实验流体力学研究的流动特征尺度在1mm～1nm范围,处于宏观流动到分子运动的过渡区。连续介质力学与量子力学这两个经典理论的衔接,提出了诸如连续性假设适用性、边界滑移等基本理论问题。同时从微纳米尺度研究界面处液/固/气的耦合,化学、电学性质对流动的影响值得关注。微纳米实验测量仪器融入了力、电等测量手段,要求测量空间精度达到nm量级,力的测量精度达到pN,时间分辨率达到ns。本文围绕连续性假设适用性、边界滑移、微纳米粒子布朗运动及微尺度涡旋测量等问题,介绍了 Micro/Nano PIV、示踪粒子流场显示等技术应用于微纳流场观测的进展与难点。目前微纳米流动测量仍然沿着经典流体力学测量“小型化”的思路开展,而纳尺度的测量期待着新的实验方法与技术的提出。