助推器支承的火箭地面风载荷非定常气动系数（上）

根据新一代运载火箭CZ-5及其动力学相似缩比模型的助推支承、两个弯曲模态主方向的模态参数有显著差别的特点,推导了火箭地面风载荷在模态主方向的非定常气动弯矩系数,给出了非定常气动弯矩的计算方法,并通过坐标转换,得到风轴气动弯矩系数的计算公式。将非定常气动弯矩系数中与动特性有关的参数统称为动态弯矩因子,从而统一了所有类型火箭的地面风载荷非定常气动弯矩系数的计算公式。此外为简化助推器支承火箭地面风载荷的试验方法,给出了气动加速度和位移系数的计算方法,提出了加速度因子和动态位移因子的概念。通过对CZ-5缩比弹性模型的动特性和弯矩因子的计算,分析了支承筒和不同构型模型的影响,并根据各阶弯曲模态对应的不同响应因子的变化,证明了地面风载荷试验只计及一阶模态的合理性。建议采用弯矩和位移测量数据分析非定常气动系数,不宜直接采用加速度数据计算气动系数。     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

基于行波与模态的混合方法对Timoshenko梁进行振动主动控制

 基于Timoshenko梁理论,采用波控制和独立模态空间混合方法,对悬臂梁的振动控制问题进行研究。采用波控制方法实现对Timoshenko梁结构的一点或多点的横向位移的振动控制。首先,基于结构的整体运动,采用模态坐标控制方法,对结构振动进行整体控制设计。而后,基于结构的局部性质,采用波方法吸收结构振动中的高频能量并求出Timoshenko梁中波的反射因数和透射因数。理论上研究了单位力扰动下的悬臂梁的振动。考虑的具体方法是将PD反馈波控制与基于极点配置法设计的模态控制相结合。最后给出数值结果。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

流动参数对发动机冷却用引射器性能的影响

为了探索引射器在航空发动机空气系统中的应用可行性,采用标准k-ω模型并求解雷诺平均Navier-Stokes方程组的数值方法,分析了流动参数对发动机冷却用引射器引射系数、压力损失系数及引射性能综合参数的影响.结果表明:膨胀比由9增大至10.1,引射系数增大了 66％;膨胀比由15.2增大至20.2,引射系数降低了 19...     

简化微小液滴在超声速气流横向喷射中的运动探索

从研究超声速气流中简化液滴(刚性小球)的气动力着手,比较分析使用CFD方法与使用两相流理论中已有的颗粒阻力系数模型得到的简化液滴气动力结果,得出Charles B.Henderson给出的阻力系数经验关系式适用于计算简化液滴在超声速气流中的运动。进一步,对不同直径简化液滴的运动开展工程方法的计算。在来流Ma=2.7的二维平板超声速流场中选取一个截面,作为气相流场,结果显示:(1)简化液滴与主气流存在相对超声速运动,当简化液滴直径dk≤0.12mm时,纵向相对超声速运动区域约为0.15m~0.4m,当dk0.12mm时,作用区域明显增大;(2)以10m/s喷射出的简化液滴,其横向穿透深度与纵向运动距离比约为0.004m/1m~0.021m/1m;(3)以100m/s的速度喷射出的30~120μm直径简化液滴,其横向穿透深度与纵向运动距离比约为0.02m/1m~0.055m/1m,实际过程中,小尺寸简化液滴的汽化很快,其穿透深度很小。     

短肢剪力墙结构的自由振动特性分析

采用连续化方法导出了短肢剪力墙结构在任意高度侧向集中荷载的作用下的侧移曲线方程，由此得到该结构的抗侧移柔度系数，进而得出结构的抗侧移刚度矩阵。应用抗侧移刚度矩阵对各种整体性系数和肢强系数的短肢剪力墙结构进行了动力特性分析，研究其对结构动力特性的影响。结果表明，当肢强系数不变时，随整体性系数的增加，短肢剪力墙的前两阶振型的振动周期显著减小，而其他高阶振型的振动周期变化很小；当整体性系数不变时，短肢剪力墙的前两阶振型的振动周期随肢强系数的增加显著减小，而其他高阶振型的振动周期变化不大。     

封严篦齿腔内流动及旋涡分布和顶板换热特性的实验研究

自行设计了吸气式篦齿换热风洞并对篦齿腔内部旋涡分布及流场和篦齿顶板换热特性进行了详细的研究。测出了在不同雷诺数和齿隙比篦齿腔中旋涡分布和顶板换热规律。从机理上分析了雷诺数和齿隙比对篦齿腔内流动旋涡分布及顶板表面局部换热规律的影响。     

关于适当布置构造柱以提高墙体承载力的探讨

针对当前七、八层砖混结构住宅在不增加墙体厚度的前提下，通过适当布置构造柱，来提高墙体承载力，因而达到增大使用面积的目的。