星载激光遥感技术的发展及应用

文章简要介绍了星载激光遥感的技术原理与特性,并对几种星载激光雷达在大气探测、星体测绘、冰盖监测及全球高分辨率测绘等领域的应用做了介绍,最后分析了中国发展星载激光遥感现阶段的已有基础及对未来的发展展望。     

应用于航空变频电源系统的新型串沥混合有源滤波器

 目前变频交流(AC)电源系统开始逐渐应用到新型多电飞机(MEA)中,传统有源滤波器无法满足宽输入频率变化要求,为此需要设计一种适合于宽变频航空电源系统的有源滤波器。本文研究了一种应用于航空变频电源系统的新型串联混合有源滤波器(SHAPF),该有源滤波器直接根据基波电流进行补偿,针对各种频率输入均能起到较好的抑制谐波作用。讨论了这种新型SHAPF的变频谐波抑制原理,给出了该滤波器的控制系统详细设计过程,包括基于双数字信号处理器（DSP）的控制平台设计和逐点动态检测基波电流的算法设计,最后进行了样机实验,对比了加入滤波器前后系统输入电流实验波形和谐波分析,加入滤波器后系统输入电流总谐波失真度（THD）由174.00%变化至4.80%,滤波效果良好;在360 Hz,400 Hz和720 Hz不同输入频率进行了滤波实验,验证系统在宽变频输入条件下均具有良好控制性能,满足航空变频输入时输入功率因数校正要求。     

有效性因子在卫星姿控系统集成故障诊断与容错控制中的应用

 研究了在轨卫星姿态控制系统(ACS)发生可修复性故障状况下的集成故障诊断与容错控制。考虑执行机构和敏感器分别或同时出现故障,相应地分别或同时在姿态动力学和运动学方程引入控制有效性因子和测量有效性因子,利用二级卡尔曼滤波算法求解其值,以说明系统的控制以及测量的有效程度。采用统计假设检验通过其幅值变化判断系统是否存在故障,当故障发生时,引入重构容错控制器对原控制器进行补偿控制。建立卫星闭环姿态控制系统对算法进行了仿真验证,仿真结果表明该算法快速可靠,能够满足在轨卫星姿态控制系统故障状况下的性能要求。     

基于改进SSD的风机叶片表面缺陷检测方法

针对无人机对风机叶片表面缺陷检测中出现的多尺度目标问题,提出一种基于改进SSD的风机叶片缺陷检测方法。以具有多尺度结构框架的目标检测模型SSD为基础,引入残差网络ResNet50作为其特征提取网络,用以获取更深层次的细节特征信息,从而提升缺陷检测模型的整体效果。在建立的风机叶片表面缺陷图像数据集下进行模型验证,结果表明,该方法的平均精确度mAP@.5为84.29%,与YOLOv3和RetainNet相比,对各类型缺陷的平均精确度分别提高了2.92%和8.69%,同时较传统SSD算法平均精确度提升了2.21%。     

Structured sparsity assisted online convolution sparse coding and its application on weak signature detection

Due to the strong background noise and the acquisition system noise, the useful characteristics are often difficult to be detected. To solve this problem, sparse coding captures a concise representation of the high-level features in the signal using the underlying structure of the signal. Recently, an Online Convolutional Sparse Coding(OCSC) denoising algorithm has been proposed. However, it does not consider the structural characteristics of the signal, the sparsity of each iteration is not eno...     

An internal power angle control strategy for high-speed sensorless brushless DC motors

High-speed Brushless DC Motors(BLDCMs) usually adopt a sensorless control strategy and operate in three-phase six-state drive mode. However, the sampling errors of the rotor position and the driving method increase the Internal Power Angle(IPA), resulting in a decrease in the efficiency of the system. Conventional IPA reduction strategies are either sensitive to motor parameters, or ignore diode freewheeling during the commutation process, or require additional current sensors. In this paper, a ...     

Target localization method of non-cooperative spacecraft on on-orbit service

With the explosion of the number of meteoroid/orbital debris in terrestrial space in recent years, the detection environment of spacecraft becomes more complex. This phenomenon causes most current detection methods based on machine learning intractable to break through the two difficulties of solving scale transformation problem of the targets in image and accelerating detection rate of high-resolution images. To overcome the two challenges, we propose a novel non-cooperative target detection method using the framework of deep convolutional neural network.Firstly, a specific spacecraft simulation dataset using over one thousand images to train and test our detection model is built. The deep separable convolution structure is applied and combined with the residual network module to improve the network’s backbone. To count the different shapes of the spacecrafts in the dataset, a particular prior-box generation method based on K-means cluster algorithm is designed for each detection head with different scales. Finally, a comprehensive loss function is presented considering category confidence, box parameters, as well as box confidence. The experimental results verify that the proposed method has strong robustness against varying degrees of luminance change, and can suppress the interference caused by Gaussian noise and background complexity. The mean accuracy precision of our proposed method reaches 93.28%, and the global loss value is 13.252. The comparative experiment results show that under the same epoch and batchsize, the speed of our method is compressed by about 20% in comparison of YOLOv3, the detection accuracy is increased by about 12%, and the size of the model is reduced by nearly 50%.     

表面等离子体共振生物传感器在微生物检测中的应用

在地球环境及航天空间环境中存在有多种多样的微生物,快速、准确地检测这些微生物成为亟待解决的问题.在众多微生物检测方法中,表面等离子体共振生物传感器凭借其快速、灵敏的检测特点,近年来发展迅速.本文综述了表面等离子体共振生物传感器在微生物检测领域中的应用,以期为地面及航天环境的微生物检测工作提供技术参考.     

印制电路板视觉检测系统

本文对印制电路板视觉检测进行了深入地讨论,印制电路板视觉检测即要求检测出印制电路板上的几何缺陷,用计算机来代替人的视觉,介绍了图像的配准,图像的分割及故障点的识别。     

多传感器检测系统的分布式数据融合

研究分布检测系统中融合中心的多种数据融合方法,如“ａｎｄ”、“ｏｒ”逻辑规则、表决融合方法和基于最小错误准则的最优融合方法,以及带有置信度信息的最优融合方法,分析和比较了采用各种融合方法时检测系统的检测性能,最后通过仿真实例验证了理论推导的正确性,并与集中检测融合方法进行了比较。仿真结果同时表明对各种融合方法传感器增多,信噪比增加,检测系统的性能改善。