重力法计算机辅助振动标定原理及其应用

本文介绍了基于重力法的计算机辅助振动标定技术的基本原理、误差分析和实际应用。实践表明,本技术具有精度高(误差≤1％),投资少,标定快以及操作简单等特点,特别适用于振动实验室的现场和系统标定。     

气动院校准箱工作原理分析及TPS校准目标量的获得方法

介绍了中航气动院发动机模拟器校准设备—校准箱的工作原理,及在校准箱中进行TPS静特性校准的目标量的获得过程;包括校准箱工作原理分析、TPS校准的目标量、校准目标量的计算、校准目标量在风洞试验中的应用等几部分。     

小型螺旋桨二分量应变天平

本文介绍了一种小型螺旋桨二分量应变天平的设计与校准，并给出该天平的主要技术性能。经校测，天平性能良好，精度较高。目前，该天平已用于飞机型号螺旋桨设计造型实验。     

直流高电压电阻分压器的设计与实现

对直流高压电阻分压器的设计进行了较为详细的论述.通过对所用电阻的合理选择和组合,并采取了正确的分压比测量方案和等电位屏蔽措施,保证了分压比的准确和稳定.     

Enhancing the efectiveness of film cooling

Advanced gas turbine stages are designed to operate at increasingly higher inlet temperatures to increase thermal efficiency and specific power output.To maintain durability and reasonable life,film cooling is needed in addition to internal cooling,especially for the first stage.Film cooling lowers material temperature by forced convection inside film-cooling holes and by forming a layer of coolant about component surfaces to insulate them from the hot gases.Unfortunately,each cooling jet forms a pair of counter-rotating vortices that entrains hot gas and causes the film-cooling jet to lift off from the surface that it is intended to protect.This paper gives an overview of efforts to enhance the effectiveness of film-cooling.This paper also describes two new design concepts.One design concept seeks to minimize the entrainment of hot gases underneath of film-cooling jets by using flow-aligned blockers.The other design concept shifts the interaction between the approaching hot gas and the cooling jet to occur further above the surface by using an upstream ramp.For both design concepts,computational fluid dynamics results are presented to examine their usefulness in enhancing film-cooling effectiveness.      

Blockage effect on the flow around a cylinder probe in calibration

Flow around a 2-D cylinder pressure probe placed in uniform flow,free jet flow,and wind tunnel flow was analyzed with potential flow theory and simulated with numerical method.Blockage effect was investigated under several typical flow Mach numbers.The result from numerical simulation shows a similar trend to the one from potential flow method while varies in quantity.Wind tunnel walls accelerate the flow near the probe and thus produce a blockage effect;Boundary of free jet flow,however,decelerates the flow and thus produces a "negative" blockage effect.A maximum incoming Mach number exists when the probe is calibrated in wind tunnel in high subsonic condition due to choking caused by shocks and shock induced separation.The critical Mach number varies with blockage ratio,which makes high Mach number impossible to achieve in large blockage ratio condition.The blockage effect itself is unavoidable for calibration or measurement although a sufficiently small blockage ratio brings minor effect.Correction can be implemented based on the numerical simulation result presented in this paper and further works.      

Convergence Analysis of the Numerical Solution for Cathode Design of Aero-engine Blades in Electrochemical Machining

As a main difficult problem encountered in electrochemical machining （ECM）, the cathode design is tackled, at present, with various numerical analysis methods such as finite difference, finite element and boundary element methods. Among them, the finite element method presents more flexibility to deal with the irregularly shaped workpieces. However, it is very difficult to ensure the convergence of finite element numerical approach. This paper proposes an accurate model and a finite element numerical approach of cathode design based on the potential distribution in inter-electrode gap. In order to ensure the convergence of finite element numerical approach and increase the accuracy in cathode design, the cathode shape should be iterated to eliminate the design errors in computational process. Several experiments are conducted to verify the machining accuracy of the designed cathode. The experimental results have proven perfect convergence and good computing accuracy of the proposed finite element numerical approach by the high surface quality and dimensional accuracy of the machined blades.     

Adaptive Sliding Control of Six-DOF Flight Simulator Motion Platform

本文使用Newton-Euler法推导了六自由度飞行模拟器运动平台完整的线性化形式的动力学方程,并以此为基础,提出了一种在任务空间中的非线性自适应滑模控制方法。这种控制方法将系统中的不确定性分为定常不确定参数和时变不确定参数,利用非线性自适应控制对定常不确定参数进行辨识,同时结合滑模控制对时变不确定参数和外部扰动进行补偿。通过数值仿真分析表明,该控制策略能准确识别运动平台的载荷、惯量、重心等参数,同时又能有效地提高系统的鲁棒性能。     

Effects of RRA Treatments on Microstructures and Properties of a New High-strength Aluminum-Lithium Alloy-2A97

A new high strength 2A97 Al-Cu-Li-X alloy was subjected to triple-aging of retrogression and re-aging treatments (RRA). Transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and tensile tests were used to investigate the effects of RRA treatment on the microstructures and properties. DSC test reveals the reversion temperature range of the strengthening δ' (Al3Li)phase. The results show that the microstructure consists of δ' (Al3Li) phase, T1 (Al2CuLi) phase and θ"/θ'(Al2Cu) phase for 2A97 alloy treated by a triple-aging ora retrogression and re-aging treatment in the following order: (1) at 165 ℃×30 min, (2) at 220 ℃ or 240 ℃×15 min, (3) at 165 ℃×24 h. The plastic deformation, incorporated into the treatment after secondary high temperature aging, promotes the T1 precipitation during final re-aging. The tensile properties of the alloy treated by the retrogression and re-aging treatment reach the peak level of alloy single-aged at 165 ℃ in T6 temper.     

On Nonlinear-Evolution of C-type Instability in Nonparallel Boundary Layers

The process of evolution, especially that of nonlinear evolution, of C-type instability of laminar-turbulent flow transition in nonparallel boundary layers are studied by means of a newly developed method called parabolic stability equations （PSE）. Initial conditions, which are very important for the nonlinear problem, are investigated by computing initial solution of the harmonic waves, modifying the mean-flow-distortion, and giving initial value of TS wave and its subharmonic waves at initial station by solving linear PSE. A numerical method with high-order accuracy are developed in the text, the key normalization conditions in the PSE are satisfied, and nonlinear PSE are solved efficiently and implemented stably by the spatial marching. It has been shown that the computed process of nonlinear evolution of C-type instability in Blasius boundary layer is in good agreement with the experimental results.