Flight Flutter Modal Parameters Identification with Atmospheric Turbulence Excitation Based on Wavelet Transformation

针对基于大气紊流激励的飞机颤振试验数据具有信噪比低以及测量数据以加速度响应形式给出等特点,将小波变换与随机减量法相结合对飞机颤振模态参数进行识别,首先利用随机减量法获得结构在非零初始加速度条件下的自由衰减响应,然后对该自由衰减响应进行Morlet连续小波变换,为使变换简单,本文采用了Parseval定理和留数定理,利用Morlet的带通滤波特性,通过搜索小波变换系数在不同的尺度区域内的极大值,再根据小波变换系数的极大值、相角与固有振动频率及阻尼系数间的关系,即可识别出各模态参数。并对利用小波变换识别颤振模态参数时,实现模态解耦应满足的条件进行了分析研究。通过仿真和飞机颤振试验数据分析,验证了该识别方法不仅简单、有效和可行,而且具有较强的抗噪性。     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

A Nonlinear Sub-grid Scale Model for Compressible Turbulent Flow

本文采用直接过滤的Navier-Stokes方程组作为可压缩湍流大涡模拟控制方程组。方程组中因过滤产生的高阶相关项用Taylor级数展开近似,但仅保留级数的一阶导数项。这样产生的误差相当于丢失了模型的部分耗散作用,本文用一种动力学非线性亚格子模型来补偿丢失的耗散影响。本文根据Caylay-Hamilton定理导出了一个非线性亚格子模型,模型中包含的系数由动力学模式确定。与传统的动力学Smagorinsky模式相比,这种动力学非线性模型(DNM)稳定性更好,且不需要在统计均匀方向进行统计平均来计算模型系数,因此减少了计算开销。本文用这种非线性亚格子模型对绕双椭球高超声速湍流进行了模拟,并将所得结果与实验值、计算值及理论值进行了对比。结果表明,本文模型可以有效地模拟可压缩湍流流场。     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

在片校准标准件基底边界条件影响

通过分析国内外校准标准件物理边界条件,研究不同校准基底的物理边界条件对共面波导（CPW）传输线特性和校准准确度的影响。研制了W波段砷化镓衬底的多线TRL在片校准标准件,将在片校准标准件分别放置在金属卡盘、玻璃片、吸波材料三种校准基底上。用三种不同校准基底的校准标准件对试验装置校准后,分别提取了CPW传输线的衰减常数、相对介电常数和特征阻抗,并对商用校准标准件104-783A的短路标准和传输线标准进行了测试,验证了结果的合理性。     

正弦压力信号幅值测量无差算法研究

正弦压力校准常用比较法,通过比较标准压力传感器与被校压力传感器在同一正弦压力源中的响应完成被校传感器的幅值校准。对正弦压力信号幅值的测量算法进行了研究,提出了一种控制采样频率为标准激励信号频率整数倍的算法,可实现幅值的无差运算,理论推导和仿真实验表明,该算法能有效提高单频校准的准确度。     

光学遥感卫星在轨星上绝对辐射定标的研究进展

高精度绝对辐射定标是实现光学遥感定量化应用的重要前提。首先简要介绍了绝对辐射定标,接下来系统性地梳理国内外发展现状及发展趋势,重点分析了太阳反射谱段光学遥感卫星在轨星上绝对辐射定标的各种方法,包括遥感器上定标设备、恒星和月球定标、高精度参考交叉定标卫星和同步绝对辐射定标仪等,其中前两类已经在轨实现精度优于2%~5%,后两类计划当中精度优于1%。最后总结发展规律和发展启示,给出高精度光学遥感卫星在轨星上绝对辐射定标发展的几点讨论。     

波形记录仪触发延迟线性的实验研究

提出了使用正弦波激励评价触发延迟线性度和触发抖动的新方法,通过一个波形在有触发延迟和无触发延迟时,采集序列间的相位差对应的时间差来最终判定触发延迟结果。用该方法实现的触发延迟线性度测量方法,将触发延迟直接溯源到激励信号的频率量上,无需额外的精密延时器等装置,减少了测量环节,并且可以实现任意延迟的精确测量。以不同频率、不同触发延迟、不同采集速率下的实验结果的对比给出了触发延迟线性校准的结论性意见,同时验证了所述方法的有效性和切实可行性。     

基于隐式温度修正的二维热线风速仪校准方法

热线风速仪主要用于湍流流场测量。热线测量的主要误差来源是由环境温度变化导致的热线校准参数的变化。Brunn提出的传统温度效应修正方法在环境温度变化较大的情况下会带来明显的误差。本文经过理论推导,提出了一种新的基于隐式温度修正的二维热线风速仪校准方法,并开展了热线校准实验研究。结果表明:当环境温度变化在4℃范围内时,本文提出的方法与Brunn方法的测量精度相当;当环境温度变化超过4℃时,本文提出的方法的测量精度远高于Brunn方法。