一种基于幂级数函数的混合域基函数的收敛性分析

为提高计算效率,以一种基于双线性四边形模拟物体形状的幂级数函数为混合域基函数,用伽列金矩量法(MOM)对电中、小尺寸金属散射体的雷达散射截面(RCS)进行计算。分析了幂数级函数阶数M与其收敛性的关系。对二面角、矩形平板、等边三角形平板和圆柱等不同目标的单站或双站RCS计算结果表明,在此特定条件下M=3时该算法计算值与文献结果较为吻合,计算速度和精度均可满足仿真要求。     

探测跟踪系统低空多路径模型的研究

根据对飞行器跟踪低空目标时所受的多路径干扰的分析，给出了基于多闪烁点源复杂目标和镜像目标的雷达散射截面积(RCS)模型以及地面散射系数模型。对整套模型方案进行的仿真实验表明，实验结果与实测数据吻合较好。对飞行器超低空飞行时抑制镜像干扰问题的解决有重要的参考价值。     

多目标无源箔条质心干扰的应用研究

通过对雷达信号的频谱特性分析,研究了箔条质心干扰先进体制雷达的可行性,开展了舰载无源质心对抗多目标来袭的算法研究.分析了在两枚导弹同时来袭时,综合舰艇运动、导弹运动、箔条云运动、舰艇雷达截面积变化、箔条云雷达截面积变化、复合质心点形成原则等诸多因素,得到多目标对抗的一些决策原则.     

一种隐身无人飞行器外形的电磁散射特性的实验研究

以降低无人飞行器侧向雷达截面（RCS）为目的，根据电磁散射基本理论和低RCS选型的基本原理，设计了一种以椭圆截面为机身、大后掠角的翼身和边条融合的鸭式布局外形。电磁散射性的实验结果表明，该外形的RCS在侧向比基准模型的降低了10dB左右。     

A deterministic computational model for the two dimensional electron and photon transport

A deterministic (non-statistical) two dimensional (2D) computational model describing the transport of electron and photon typical of space radiation environment in various shield media is described. The 2D formalism is casted into a code which is an extension of a previously developed one dimensional (1D) deterministic electron and photon transport code. The goal of both 1D and 2D codes is to satisfy engineering design applications (i.e. rapid analysis) while maintaining an accurate physics based representation of electron and photon transport in space environment. Both 1D and 2D transport codes have utilized established theoretical representations to describe the relevant collisional and radiative interactions and transport processes. In the 2D version, the shield material specifications are made more general as having the pertinent cross sections. In the 2D model, the specification of the computational field is in terms of a distance of traverse z along an axial direction as well as a variable distribution of deflection (i.e. polar) angles θ where −π/2<θ<π/2, and corresponding symmetry is assumed for the range of azimuth angles (0<φ<2π). In the transport formalism, a combined mean-free-path and average trajectory approach is used. For candidate shielding materials, using the trapped electron radiation environments at low Earth orbit (LEO), geosynchronous orbit (GEO) and Jupiter moon Europa, verification of the 2D formalism vs. 1D and an existing Monte Carlo code are presented.     

轻型飞机燃油油量表指示器的原理设计和定量分析

燃油油量的测量，方法很多。本文首先论述了浮子电位器式传感器与电阻电桥相匹配的测量原理以及计算方法，     

舰载机拦阻着舰载荷谱编制技术

舰载机舰面载荷谱是航母服役环境下飞机结构长寿命和耐久性设计的关键。依据舰载机在拦阻着舰过程中的舰面载荷特点，论述了现有编制方法的局限性，结合多体动力学仿真模型探讨了载荷谱编制的方案和流程，建立了拦阻着舰多体动力学运动方程和仿真模型，并进行了仿真计算。通过对舰载机飞行剖面以及拦阻着舰任务剖面特点分析，确定了飞机拦阻着舰任务段载荷谱的主要工况以及比例关系，编制出飞机拦阻着舰过程的重心谱，绘制出载荷谱超越曲线，为舰载机的设计载荷谱编制提供依据，具有较高的工程应用价值。     

Turbulent characteristics and rotation correction of wall function in rotating channel with high local rotation parameter

The turbulent fluctuation and the rotation correction of wall function law are investigated in the entrance section of a rotating channel. The one-dimensional hot wire probe and the X-type probe are utilized to measure the boundary layer at four streamwise stations. Through the analysis on the boundary layer near the leading side and trailing side, it is found that the turbulent fluctuation is promoted in the trailing side whereas suppressed in the leading side. This difference is attributed to the Coriolis instability near the trailing side. In addition, considering the local rotation parameter Rc, whose maximum absolute value is 0.014, is larger than that in previous research, whose maximum value is 0.007, the whole process of the relaminarization is captured. To understand this phenomenon better, the effects of the generation term and the Coriolis term in the transport equation of the Reynolds stress are discussed. In addition, the rotation correction of the viscous-Coriolis region and the Coriolis region are discussed, a new revising method for the wall function is proposed.     

GB/T 3364中异形截面纤维当量直径计算方法的研究

GB/T 3364碳纤维直径和当量直径试验方法中,异形截面纤维当量直径的计算方法较为复杂.经过计算公式的数学推导,使得异形截面纤维当量直径的计算和测量步骤有了较大的简化,并通过实验验证了简化方法的有效性.     

并列双发三维非对称多S弯喷管参数化设计方法

形成了一套基于CFD计算评价的并列双发三维非对称多S弯喷管参数化设计方法,并初步证明了该方法的正确性和可行性.多S弯中心线在Z向偏心度为0时:第一S弯Y向偏心度、长度都最小,第二S弯Y向偏心度、长度都最大,第三S弯Y向偏心度、长度分别介于前两个S弯对应参数之间,各S弯都采用进口缓慢转弯,出口快速转弯的规律,以利于抑制背风侧分离和涡.剖面在各S弯上都采用进口快速收缩缓慢转弯,出口缓慢收缩快速转弯的规律,且宽高比与侧边倾角在进出口变化速率相同,且侧边倾角只分布在第一S弯上,以利于稳定流场和增加隐身性能.合流器采用楔底宽高比约束,其值应不超过0.26.