Quantitative assessment and visualization of flight risk induced by coupled multi-factor under icing conditions

Aircraft icing has been proven to be one of the most serious threats to flight safety. During the analysis of flight risk under icing conditions, quantitative assessment and visualization of flight risk are quite essential as they provide safe manipulation strategies in intricate conditions. However, they are rarely studied. Since the icing flight accidents are the result of the coupling of multiple unfavorable factors, in present study, we have proposed a method to quantitatively assess flight risk induced by multi-factor coupling under icing conditions by Monte-Carlo simulation and multivariate extreme value theory. The results demonstrate that the flight risk probability increases with the rise of unfavorable factors. Besides, a flight risk visualization method named flight safety window has been presented to build the flight risk distribution cloud maps in different complex conditions. The cloud maps show that the icing would give rise to atrophy of the safety scope, and the consequence would be even more severe when coupled with other more unfavorable factors. The proposed methods in this study would be useful in flight risk analysis under icing conditions and can enhance the pilot's situational awareness in selecting correct strategies within the safety zone to avoid unsafe manipulation.     

面向空间天线的TWF复合材料性能研究

利用碳纤维三向编织物（triaxial woven fabric，TWF）作为增强材料，与柔性基体材料硅橡胶复合，制成兼具一定柔性和刚性的复合材料壳膜结构，用于卫星天线反射器，是一种新型的高精度可展开天线实现方案。采用复合材料细观方法，对碳纤维增强硅橡胶TWF复合材料进行了力学性能的研究。首先由纤维和基体的材料特性得到均质纤维束的材料特性；接下来考虑纤维束交织情况（起伏波动）建立由纤维束组成的单胞实体有限元模型；然后对单胞实体有限元模型进行均匀化分析，施加周期性边界条件，最终得到等效的均质材料特性；为满足天线反射器高性能需求，分析了碳纤维种类、纤维体积分数对单胞等效性能的影响规律。对该材料力学性能的研究，可以为其未来应用于大型高精度可展开天线反射器提供一定的理论依据。     

A boundary vector cell model of place field repetition

Hippocampal place cells are thought to form the neural substrate of a global cognitive map. However, in multicompartment mazes, these cells exhibit locally repeating representations, undermining the global cognitive map view of place cells. This phenomenon appears to be related to the repetitive layout of these mazes, but still no hypothesis adequately explains it. Here, we use a boundary vector cell (BVC) model of place cell firing to model the activity of place cells in numerous multicompartment environments. The activity of modeled place cells bears a striking resemblance to experimental data, replicating virtually every major experimental result. Our results support the BVC model and indicate that locally repeating place cell firing could result purely from local geometry.     

重型燃气轮机高雷诺数CDA叶型转捩特性数值计算

为研究重型燃气轮机的压气机叶片在高雷诺数工况下的气动性能,基于Gamma-Theta转捩模型的雷诺时均方程对某可 控扩散叶型进行了数值计算。通过对比不控制马赫数与控制马赫数,分析高雷诺数对可控扩散叶型气动性能及转捩特性的影响。 结果表明：在不控制马赫数条件下,在零攻角时,雷诺数从7×10 5 增大为9×10 5 ,总压损失增加了约391.95%;在高雷诺数工况下随 着雷诺数的增大,叶片流动损失不断增大,叶片可用攻角范围减小,同时在叶片吸力面出现激波,干扰转捩的产生。在控制马赫数 条件下,当Ma=0.6时,在零攻角工况下,雷诺数从8.2×10 5 增大为1×10 7 ,总压损失减小了约38.98%,吸力面转捩起始点从4.78%弦 长处前移至1.11%弦长处;在高雷诺数工况下,叶片流动损失随着雷诺数的增大不断减小,吸力面转捩位置前移。     

温度参数下轴编C/C复合材料的超高温热结构性能分析

为了研究轴编碳/碳（C/C）复合材料的超高温热结构性能,开展了2800℃超高温载荷下复合材料的拉伸实验,表征了复合材料组分材料的高温失效形貌;提出了立方体单胞和正六棱柱单胞的温度周期性边界条件的算法和预测复合材料等效热结构参数的方法,在材料属性各向同性正六棱柱单胞模型上验证了方法的正确性;最后建立了轴编C/C复合材料的代表性体积单元,计算了复合材料随温度载荷变化下的等效热结构参数,与实验数据进行了对比分析。分析表明：开展的轴编C/C复合材料的超高温拉伸实验,可以得到复合材料在2800℃载荷下复合材料的等效刚度值,同时分析了轴向试件和径向试件的高温失效机理,径向试件的纤维束拉伸强度对复合材料的径向拉伸强度起到决定性的作用。在应用位移以及温度周期性边界条件的基础上,提出的方法可以得到随温度载荷变化下复合材料的等效热结构参数,得出复合材料在横向满足近似各向同性的特性,预测结果表明只改变温度参数下复合材料的等效热导率不会发生改变。提出的方法同样也适用于其他编织复合材料的热结构性能研究。     

三维不可压边界层抛物化稳定性方程的椭圆特性研究

针对三维平行不可压边界层流动的抛物化稳定性方程,研究其剩余的椭圆特性,提出了消除该特性的具体方法,并对抛物化稳定性方程解与全椭圆问题解的一致性进行了证明。     

用两颗GPS卫星确定低轨卫星轨道的初值方法

研究了用两颗全球定位系统（ＧＰＳ）卫星粗略确定低轨卫星轨道的问题,并着重讨论了其中的初值问题,给出了一种有效的初值方法。实验结果证明：这种方法能给出一个确定的、实用的初值,大大减少了初轨计算的计算量,并使得算法收敛更加有保障。在工程实用方面比传统的猜测方法具有较大的优势。     

非线性两点边值问题的六阶三对角差分法

讨论了满足边界条件y(a)=A 和y(b)=B 的二阶非线性常微分方程y″=f(x,y)的六阶三对角差分法,并从理论和实际计算证明了该方法的六阶收敛性。     

具有无源控制空腔时正激波/湍流附面层干扰的数值模拟

采用雷诺平均N-S方程和B/L代数湍流模型计算了具有无源控制空腔时正激波/湍流附面层干扰流场。计算与实验结果的比较表明,本文方法可较准确地预测激波结构、激波与附面层干扰区流动基本特征及波后流动分离状态、激波位置、波前马赫数等参数。      

离散气膜孔下游边界层的实验研究

“Ｘ”型热线测量了离散气膜孔下游边界层内的湍流量,将热线探头绕轴转三个角方位以感受三维湍流场信息。结果表明,边界层内湍动能分布呈反“Ｓ”形,吹风比和孔排数对参数分布有重要影响,这种影响在很长距离上不消失,所以,常用的ｋ－ε模型不经修正不能正确预计这类边界层的发展。