基于滑模的多无人机系统协同编队控制

针对具有非完整约束的多无人机系统编队控制问题,提出了一种基于滑模的协同编队控制算法。控制目标是使多无人机系统能够收敛到期望编队,并且能够跟踪上期望的运动轨迹。在领导-跟随结构中,编队的期望运动轨迹由一个动态的虚拟领导者来表示,仅部分跟随者先验已知虚拟领导者信息,并且所有跟随者之间只能局部交互信息。首先,采用分布式状态观测器,使所有跟随者能够在有限时间内估计出虚拟领导者的状态。然后,利用该观测器的估计状态,提出了基于滑模的协同编队控制算法。最后,基于李雅普诺夫稳定性理论证明了多无人机系统的稳定性,并且通过5架无人机的仿真验证了所提算法的有效性。     

Finite-time composite guidance law with input constraint and dynamics compensation

Guidance laws are proposed for a near space interceptor with on–off type thrust as output. The target-interceptor engagement kinematics is integrated with the first-order dynamics of thruster to design guidance laws. The bang-bang type guidance law with linear sliding mode is proposed to deal with thruster dynamics, and the sufficient condition for finite time convergence is rigorously proved based on the finite-time convergence theory. According to the sufficient condition, a sliding mode guidance law with hysteresis-band switching is introduced to reduce the switching frequency of thruster. Then two guidance laws are combined into a composite guidance law to improve the guidance performance. Simulation results show that the line-of-sight angular rate can converge to a neighborhood of the equilibrium point before the final time of the guidance process, and the composite guidance law has better performance than typical guidance laws.     

Guidepost-based autonomous orbit determination method for GEO satellite

Guidepost-based navigation system is a novel autonomous orbit determination method for the GEO satellite. The system is achieved by using the camera imaging function to obtain the guidepost images and the GNSS signal receiver to obtain the pseudoranges between the GEO and the navigation satellites. Due to the high altitude of GEO satellite and the time-varying sunlight condition in the space environment, it may be difficult to obtain object image points and the distance measurements of GNSS because of the weak visibility of the guideposts. To deal with the problem, a novel integrated orbit determination system is presented. The Earth landmarks, the in-orbit spacecraft and GNSS navigation satellites whose line-of-sights and the distance can be easily obtained are used at the same time as information for the GEO satellite navigation based on the observability conditions analysis. The observability of the GEO satellite navigation system is analyzed through the physical observability, the mathematical observability and the engineering observability through the observing geometry, the rank of observability matrix and the Cramer-Rao lower bound (CRLB) respectively. Besides, the maximum correntropy unscented Kalman filter (MCUKF) algorithm is applied to improve the estimation stability of the system in the presence of non-Gaussian noises. The simulation indicates the feasibility of the proposed scheme.     

关于约束分类问题的研究

约束条件的分类对于简化数学规划问题的求解具有重要意义，对于凸函数ｇｉ（ｘ）（ｉ＝１，２，…，ｎ）给出了约束ｇｉ（ｘ）≤０是必要约束或多余约束的充要条件，对于一般约束，定义了约束相关矩阵，给出了约束是必要的或多余的充要条件，对相对多余约束给出了分类。     

Plastic wrinkling model and characteristics of shear enforced Ti-alloy thin-walled tubes under combination die constraints and differential temperature fields

Plastic wrinkling predictions and shear enforced wrinkling characteristics of Ti-alloy thin-walled tubes under combination die constraints have become key problems urgently in need of solutions in order to improve forming quality in their shear bending processes under differential temperature fields. To address this, a wrinkling wave function was developed by considering their shear bend deformation characteristics. Based on this wave function and the thin shell theory, an energy prediction model for this type of wrinkling was established. This model enables considera-tion of the effects of shear deformation zone ranges, material parameters, loading modes, and fric-tion coefficients between tube and dies on the minimum wrinkling energy. Tube wrinkling sensitive zones (WSZs) can be revealed by combining this wrinkling prediction model with a thermal-mechanical coupled finite element model for simulating these bending processes. The reliability of this wrinkling prediction model was verified, and an investigation into the tube wrinkling char-acteristics was carried out based on the experimental conditions. This found that the WSZs are located on either a single side or both sides of the maximum shear stress zone. When the friction coefficients between the tube and the various dies coincide, the WSZs are located on both sides. The larger the value of the tube inner corner radius and/or the smaller the value of the outer corner radius, the smaller the wrinkling probability. With an increase in the value of the moving die dis-placement, the wrinkling probability increases at first, and then decreases.     

A direct position determination method with combined TDOA and FDOA based on particle filter

The localization of a stationary transmitter using moving receivers is considered. The original Direct Position Determination (DPD) methods, with combined Time Difference of Arrival (TDOA) and Frequency Difference of Arrival (FDOA), do not perform well under low Signal-to-Noise Ratio (SNR), and worse still, the computation cost is difficult to accept when the computational capabilities are limited. To get better positioning performance, we present a new DPD algorithm that proves to be more computationally efficient and more precise for weak signals than the conventional approach. The algorithm partitions the signal received with the same receiver into multiple non-overlapping short-time signal segments, and then uses the TDOA, the FDOA and the coherency among the short-time signals to locate the target. The fast maximum likelihood estimation, one iterative method based on particle filter, is designed to solve the problem of high computation load. A secondary but important result is a derivation of closed-form expressions of the Cramer-Rao Lower Bound (CRLB). The simulation results show that the algorithm proposed in this paper outperforms the traditional DPD algorithms with more accurate results and higher computational efficiency, and especially at low SNR, it is more close to the CRLB.     

去中心化时差频差直接定位方法

针对原始利用时差频差的直接定位(DPD)方法存在数据传输量和计算量大的瓶颈,提出了两种去中心化直接定位方法。第1种方法采用去中心化配对方案,只将各观测站截获信号在站间进行一次传输,将数据传输和计算分散到各观测站间并行计算互模糊函数(CAF),构造仅满足满秩条件的互模糊矩阵(CAM)。第2种方法根据推导的任意互模糊函数间关系公式,采用归约方式去中心化的在各观测站并行计算余下互模糊函数,补全互模糊矩阵。两种方法都降低了直接定位数据传输量,提高了计算效率。性能分析和仿真实验表明本文两种方法精度性能优于两步定位方法,在低信噪比时两种方法都可达到比较理想的精度性能,在高信噪比时第2种方法与原始直接定位方法的精度性能相当。     

基于最临界约束准则法的机翼主承力结构优化

利用最临界约束准则法对某型飞机机翼主承力结构在强度，位移，扭转角，稳定性和尺寸约束下，以最小重量为目标函数进行了优化，并在实际操作过程中依据机翼结构的复杂性对最临界约束准则法做了相应的修改。结果表明，应用最临界约束准则法进行机翼结构优化时，效率较高，机翼结构重量稳定下降，优化效果明显。     

基于混合集合规划的机位分配约束规划模型

为解决现有数学规划方法只能简单描述停机位分配问题而且不能全局搜索最优解的问题,应用混合集合规划方法进行数据建模和逻辑建模,并设计切实可行的求解策略,从而实现全局搜索最优解。对典型实例进行了计算及对比分析,混合集合规划方法能够得出全局最优解,并且最优分配结果的优化目标提升了2%。结果表明,基于混合集合规划的约束规划模型有效可行。     

基于一类含极少运动副四支链两转一移三自由度并联机构的五轴混联机器人

首先提出了一类含较少运动副四支链两转一移三自由度（2R1T）并联机构（PMs）2RPU-UPR-RPR和2UPR-RPU-RPR，然后提出了极限约束力螺旋系的概念，分析四支链2R1T并联机构末端的极限约束力螺旋系，对所提出的四支链2R1T并联机构是否同类机构中含运动副最少进行了论证。基于提出的四支链并联机构构造了一种五自由度混联机器人机构，建立了2-RPU-UPR-RPR并联机构的位置反解模型，并将其等效成一个三自由度串联机构RPR，进而对整个混联机器人机构进行了位置正反解分析，建立得到了混联机器人机构位置反解的显式解析表达式，并用加工球面轨迹的算例对所建运动学模型的正确性进行验证。提出的五自由度混联机器人含有极少的运动副，且所有转动自由度均具有连续转轴，能够得到解析的位置模型表达式，很容易实现轨迹规划与运动控制，具有良好的应用前景。