发动机叶片气相渗铝工艺研究

为提高发动机叶片抗高温氧化和抗燃气腐蚀的能力,选用发动机叶片气相渗铝工艺,通过模拟生产的工艺试验,以试验数据及现象为依据,客观分析了渗铝的加热温度、保温时间及渗铝剂的用量等因素对渗铝层深度的影响,从而确定某型发动机叶片气相渗铝时的热处理参数。     

不同回火温度对冶金锯片用钢65Mn力学性能的影响

利用力学性能测试及热处理分析，在360℃-540℃之间对冶金锯片用钢65Mn进行了连续回火处理。结果显示：随着回火温度的升高，试样的强度及硬度连续下降。在400—420℃之间，发现了回火脆性，冲击值、断面收缩率和延伸率发生明显变化。实验结果为预防锯片工作过程中的失效提供了技术参考。     

超声波流量计不同运算方式对比分析

温度漂移是影响超声波流量计测量精度的一个重要因素,本文从算法上提出一种不受其影响的数学模型,以使相应的硬件简单化.该方法已应用在超声波流量计中,收到了很好的效果.     

频率计数器在航天器信号频率测量中的适用性分析

从频率计数器的工作原理出发,分析了航天器测控通信中常用的调相信号、调频信号和相移键控信号的频率测量误差,给出了调相信号和调频信号的测量误差表达式。使用频率计数器对上述3种航天器信号进行了频率测量试验。理论分析和试验结果表明,频率计数器适用于航天器调相信号和调频信号的频率测量,不适用于相移键控信号的频率测量。在实际使用中,为保证测量精度,应根据被测信号的调制方式选择适当的测量方法。     

Monthly mean foF2 model for an African low-latitude station and comparison with IRI

We have employed the hourly values of the ionospheric F-region critical frequency (foF2) obtained from Ouagadougou ionosonde, Burkina Faso (geographic coordinates 12° N, 1.8° W) during the interval of 1985–1995 (solar cycle 22) and solar radio flux of 10 cm wavelength (F10.7) to develop a local model (LM) for the African low-latitude station. The model was developed from regression analysis method, using the two-segmented regression analysis. We validated LM with foF2 data from Korhogo observatory, Cote d’Ivorie (geographical coordinates 9.3° N, 5.4° W). LM as well as the International Reference Ionosphere (IRI) agrees well with observations. LM gave some improvement on the IRI-predicted foF2 values at the sunrise (06 LT) at all solar flux levels and in all seasons except June solstice. The performance of the models at the representing the salient features of the equatorial foF2 was presented. Considering daytime and nighttime performances, LM and IRI are comparable in low solar activity (LSA), LM performed better than IRI in moderate solar activity (MSA), while IRI performed better than LM in high solar activity (HSA). CCIR has a root mean square error (r.m.s.e), which is only 0.10 MHz lower than that of LM while LM has r.m.s.e, which is about 0.05 MHz lower than that of URSI. In general, our result shows that performance of IRI, especially the CCIR option of the IRI, is quite comparable with the LM. The improved performance of IRI is a reflection of the numerous contributions of ionospheric physicists in the African region, larger volume of data for the IRI and the diversity of data sources, as well as the successes of the IRI task force activities.     

整体构件周向叶片电解加工流场设计及实验

针对整体构件周向叶片的特点与加工难点,设计了带有内置绝缘腔的电解套型加工工具阴极,建立了两种进液方式的流场三维模型,采用有限元法对两种进液方式的流场进行仿真计算。计算结果表明由绝缘腔的叶盆叶背两侧进液并对出液口进行优化的流场方式较好,电解液流速较高且流场较均匀。使用根据有限元仿真结果设计的阴极开展实验,结果表明实验与流场仿真结果相符,采用优化流场模型的加工过程流场稳定,加工效率较高。     

《高频电子线路》课程“相乘器”教学策略

相乘器是高频电子线路课程中的一个重要单元电路。掌握相乘器的组成、基本原理、分析方法以及器件特点是通信电子信息类学生学好调制、检波以及混频电路的关键所在,讨论非线性器件二极管在开关状态下组成"相乘器"的教学策略对教学活动具有重要意义。     

Boundary condition modelling and identification for cantilever-like structures using natural frequencies

The actual boundary conditions of cantilever-like structures might be non-ideally clamped in engineering practice, and they can also vary with time due to damage or aging. Precise modelling of boundary conditions, in which both the boundary stiffness and the boundary mass should be modelled correctly, might be one of the most significant aspects in dynamic analysis and testing for such structures. However, only the boundary stiffness was considered in the most existing methods. In this paper, a boundary condition modelling and identification method for cantilever-like structures is proposed to precisely model both the boundary stiffness and the boundary mass using sensitivity analysis of natural frequencies. The boundary conditions of a cantilever-like structure can be parameterized by constant mass, constant rotational inertia,constant translational stiffness, and constant rotational stiffness. The relationship between natural frequencies and boundary parameters is deduced according to the vibration equation for the lateral vibration of a non-uniform beam. Then, an iterative identification formulation is established using the sensitivity analysis of natural frequencies with respect to the boundary parameters. The regularization technique is also used to solve the potential ill-posed problem in the identification procedure.Numerical simulations and experiments are performed to validate the feasibility and accuracy of the proposed method. Results show that the proposed method can be utilized to precisely model the boundary parameters of a cantilever-like structure.     

某型干扰机干扰效果提升研究

通过研究某型干扰机对多普勒雷达速度跟踪系统的干扰方式，分析假多普勒频率产生的干扰工作机理，研究对抗科目训练中该模式干扰效果不佳的具体原因，提出了采用数字移向技术替代行波管移相，增大对雷达回波原载频的抑制度，增强干扰效果。通过对样机的测试验证，给出了两种移相电路的假多普勒干扰比较。     

特型钝体绕流动态特性的低速实验研究

在低速自由射流风洞上 ,利用热线及相关设备对由半球头部、颈部及旋成体构成的特型钝体周围非定常流动的基本特性、联合特性及湍流度分布进行了测试与分析 ,实验工况为迎角α=- 1 5°～ 1 5°、侧滑角 β =0°～ 1 0°。结果表明 ,在上述工况范围内 ,该钝体周围流场中速度脉动的能量分布平坦 ,属宽频带随机信号 ,流场中没有发生明显的流动分离 ,流场动态品质良好 ;凹陷区内气流的脉动以不同的速度向下游空间传播 ;在上述α、β变化范围内 ,钝体颈部凹陷区的最大湍流度高达 1 0 .9～ 2 4.8%。