基于非接触式测量的旋转叶片动应变重构方法

基于叶端定时非接触式测量和振动响应传递比的概念,开展高速旋转叶片动应变重构方法的研究。在频域内推导了叶片任意测点位移与任意测点动应变的传递比,给出了单模态共振下响应传递比关于位移和应变模态振型的解析表达式;建立旋转叶片的三维(3D)有限元模型,开展考虑旋转预应力效应的叶片模态分析,提取位移和应变模态振型,获得任意转速下叶端位移与叶根关键点动应变的传递比。开展高速旋转叶片叶端定时非接触式测量实验,采用周向傅里叶算法对叶端定时信号进行处理,获得叶片在不同转速单模态共振下的叶端位移,结合响应传递比,重构5个旋转叶片的关键点动应变。结果表明:旋转叶片在9000r/min和13000r/min转速下发生1阶共振时,与应变片实测结果相比,叶根处应力最大点、次大点和边缘点3个关键点的动应变平均重构误差均小于15%,验证了旋转叶片动应变重构方法的有效性。     

整体弹性结构法及在叶片流固耦合分析中的应用

针对三维叶片时域流固耦合振动响应计算普遍耗时的问题,采用一种假设整体结构的模态位移,求解固体时域响应和实现高效网格变形,发展了一种3维时域流固耦合分析的整体弹性结构方法,并应用于压气机叶片0°和180°相位角的气动稳定性分析中。结果表明,所发展方法的计算结果与传统双向时域算法和文献的结果较为吻合,而计算效率相比于传统算法显著提升;在所分析的两个相位角下,叶片振动的气动阻尼均随流量减小先增大后降低,相比于0°相位角,180°下叶片的气动稳定性大幅提高,表明该方法能有效应用于叶片的工程流固耦合研究。     

空心气冷低压涡轮动叶气热耦合数值模拟

以空心气冷低压涡轮动叶为研究对象,采用高质量的流体域和固体域网格控制技术,带转捩模型的双方程SST湍流模型,开展了基于CFD方法的叶片气热耦合问题研究。获得了不同冷气流量比(分别为1.0%,1.38%,1.8%和2.2%)、温比(分别为2.1,2.25,2.3,2.4和2.5)和压比(分别为1.4,1.6和1.8)对叶片换热特性的影响规律,设计状态中截面按弧长平均的叶片壁面金属温度计算值较试验值偏小0.3%,气热耦合计算的叶片壁面温度分布与试验结果吻合良好,验证了气热强耦合计算方法的精度,为涡轮叶片温度场分析提供了一种有效的方法。     

Downsizing an orbital space robot: A dynamic system based evaluation

Small space robots have the potential to revolutionise space exploration by facilitating the on-orbit assembly of infrastructure, in shorter time scales, at reduced costs. Their commercial appeal will be further improved if such a system is also capable of performing on-orbit servicing missions, in line with the current drive to limit space debris and prolong the lifetime of satellites already in orbit. Whilst there have been a limited number of successful demonstrations of technologies capable of these on-orbit operations, the systems remain large and bespoke. The recent surge in small satellite technologies is changing the economics of space and in the near future, downsizing a space robot might become be a viable option with a host of benefits. This industry wide shift means some of the technologies for use with a downsized space robot, such as power and communication subsystems, now exist. However, there are still dynamic and control issues that need to be overcome before a downsized space robot can be capable of undertaking useful missions. This paper first outlines these issues, before analyzing the effect of downsizing a system on its operational capability. Therefore presenting the smallest controllable system such that the benefits of a small space robot can be achieved with current technologies. The sizing of the base spacecraft and manipulator are addressed here. The design presented consists of a 3 link, 6 degrees of freedom robotic manipulator mounted on a 12U form factor satellite. The feasibility of this 12U space robot was evaluated in simulation and the in-depth results presented here support the hypothesis that a small space robot is a viable solution for in-orbit operations.     

桨叶实度及轴间距对摆线桨气动特性影响研究

悬停状态下,设计参数和摆线桨间距离对摆线桨的气动特性有较大影响。首先通过算例验证滑移网格计算方法应用于摆线桨悬停状态下气动力计算的准确性,然后研究摆线桨在不同半径、弦长和桨叶数时的气动参数特性,最后计算分析不同距离时,摆线桨间的气动干扰特性。结果表明:随着半径增大,桨叶气动力和单位面积上载荷均增大;弦长越大,气动力越大,桨叶单位面积上载荷反而越小;4叶片摆线桨产生的气动力比3叶片和6叶片大,而3叶片的桨叶载荷最大;合力偏转角分别随转速和实度的增大而减小;随着摆线桨间距离的增加,气动力损失系数和合力偏转角均减小。     

涡轴发动机燃气涡轮叶片动应力测试技术研究及验证

针对涡轴发动机高转速燃气涡轮叶片动应力测试中出现的应变计短路、高温导线断裂和线芯窜动问题,开展了动应力测试技术研究。提出了加宽基底喷涂固定应变计、优化高温导线布线、改进高温导线等工艺方法,并进行了试验验证。试验结果表明,共振转速试验测试值与计算值基本一致,共振转速测试结果准确有效。通过研究,获得了具有实际应用价值的涡轴发动机燃气涡轮叶片动应力测试技术,可为同类测量提供参考。     

永磁同步电机驱动太阳翼扰动力矩建模与仿真

建立太阳翼驱动机构(SADA)永磁同步电机的电磁方程,并利用固定界面模态综合法建立SADA驱动太阳翼耦合系统的振动方程;设计模拟柔性负载,对SADA驱动该柔性负载的扰振力矩进行仿真分析。结果表明,SADA驱动柔性负载运行过程中所产生扰振力矩主要由两个原因引起：1)电流噪声引起的力矩波动;2)控制参数选取不当引起的转角波动。     

基于模因算法的飞机装配序列规划

针对飞机制造的装配序列规划问题,提出一种基于模因算法的飞机部件装配序列规划方法。在装配优先约束矩阵和非正交干涉矩阵的基础上构建装配规划模型,以飞机零部件间的装配方向和装配工具的差异性来构建适应度函数。在非干涉解空间中进行全局搜索,获得较优的装配规划方案,通过二叉树中序遍历法将较优的方案转化为可行解,再经过交叉操作和变异操作后,在可行解空间内进行局部搜索,最终获取较优的装配方案。以某型号的飞机舱门装配为例,通过与传统遗传算法对比,证实模因算法在飞机装配序列规划中的可行性和有效性。     

Hypervelocity impact induced shock acoustic emission waves for quantitative damage evaluation using in situ miniaturized piezoelectric sensor network

Manmade debris and natural meteoroids, travelling in the Low Earth Orbit at a speed of several kilometers per second, pose a severe safety concern to the spacecraft in service through the HyperVelocity Impact(HVI). To address this issue, an investigation of shock Acoustic Emission(AE) waves induced by HVI to a downscaled two-layer Whipple shielding structure is performed,to realize a quantitative damage evaluation. Firstly a hybrid numerical model integrating smoothparticle hydrodynamics and finite element is built to obtain the wave response. The projectiles, with various impact velocities and directions, are modelled to impact the shielding structure with different thicknesses. Then experimental validation is carried out with built-in miniaturized piezoelectric sensors to in situ sense the HVI-induced AE waves. A quantitative agreement is obtained between numerical and experimental results, demonstrating the correctness of the hybrid model and facilitating the explanation of obtained AE signals in experiment. Based on the understanding of HVI-induced wave components, assessment of the damage severity, i.e., whether the outer shielding layer is perforated or not, is performed using the energy ratio between the regions of ‘‘high frequency" and ‘‘low frequency" in the acquired AE signals. Lastly, the direct-arrival fundamentalsymmetric wave mode is isolated from each sensing signal to be input into an enhanced delay-andsum algorithm, which visualizes HVI spots accurately and instantaneously with different sensor network configuration. All these works demonstrate the potential of quantitative, in situ, and real time HVI monitoring using miniaturized piezoelectric sensor network.     

某燃气涡轮工作叶片裂纹分析

为阐明测试单元环境下加速任务试车(AMT)过程中叶片早期起裂的物理原因,对裂纹叶片断口进行了检查和分析,并采用LPTi's XactLIFETM系统对叶片进行了深入的分析.结果表明:叶片叶型发生了过量的蠕变损伤,此过量的蠕变损伤导致了叶片的过量延伸以及叶型特别是在尾缘区域的转扭,此行为可能造成AMT疲劳循环条件下缘板以下的叶片伸根部位疲劳裂纹的形核与生长.因此,过量的蠕变被认为是整个裂纹形核过程的主要驱动力.