Numerical simulation of a rotary engine primary compressor impacted by bird

In order to examine the process of a rotary engine primary compressor impacted by bird, a finite element model of a bird impacted on plate is developed with the explicit code PAM-CRASH. The smooth particles hydrodynamic (SPH) method is used to simulate the bird because of the SPH method showing no signs of instability and correctly modeling the breaking-up of the bird into particles. Good agreement between the simulation results and experimental results indicates that the numerical method of bird strike used in the present paper is reasonable. Then a rotary engine primary compressor impacted by three different configurations bird named straight-ended cylinder bird, quadrangular bird, hemispherical-ended bird are investigated using the numerical simulation method. It is found that the whole process of bird strike sustained about 3.5 ms and the bird is slashed by blade during the strike. The geometry configuration of bird affected the displacement and von Mises stress of some blades severely, just because the breaking bird’s mass is affected by the bird’s configuration. In the event of bird striking on the site of"up"some blades may develop plastic deformation and it is very adverse for the safety work of the engine.     

气固两相透平叶片冲蚀特性的气动试验研究

在自行研制风洞中先后对应用较广的MCrAlY叶片涂层和2Cr12Mo-5叶片合金、钢丸表面强化试件在不同气流速度、颗粒冲角、颗粒性状、颗粒粒度的条件下进行了气动冲蚀试验。试验结果表明,无论是涂层还是合金,冲蚀率均随冲蚀颗粒的累积质量呈线性变化;由对比可知,其它条件相同的情况下,涂层在广泛的冲角范围内较合金的冲蚀率更小,表面的"烧结"特征,能减小叶片的冲蚀率;表面呈多棱的石英砂颗粒对试件的冲蚀程度强于带突圆球状的催化剂颗粒;在该试验范围内,相同材质的颗粒,粒度愈大,对试件的冲蚀率愈大;钢丸表面强化工艺兼有防冲蚀的能力。试验结果将为优化叶片选材、简化叶片维修技术、降低叶片维修成本提供有益的参考。     

The use of Gaussian equations of motions of a satellite for local gravity anomaly recovery

The orbital elements of a low Earth orbiting satellite and their velocities can be used for local determination of gravity anomaly. The important issue is to find direct relations among the anomalies and these parameters. Here, a primary theoretical study is presented for this purpose. The Gaussian equations of motion of a satellite are used to develop integral formulas for recovering the gravity anomalies. The behaviour of kernels of the integrals are investigated for a two-month simulated orbit similar to that of the Gravity field and steady-state ocean circulation explorer (GOCE) mission over Fennoscandia. Numerical investigations show that the integral formulas have neither isotropic nor well-behaved kernels. In such a case, gravity anomaly recovery is not successful due to large spatial truncation error of the integral formulas. Reformulation of the problem by combining the orbital elements and their velocities leads to an integral with a well-behaved kernel which is suitable for our purpose. Also based on these combinations some general relations among the orbital elements and their velocities are obtained which can be used for validation of orbital parameters and their velocities.     

旋翼桨叶动力学设计技术

桨叶动力学设计,其实质是求解非线性高维动力学逆问题的具体实施。本文较全面地阐述了这方面的进展情况,提出了切实可行、有效实用的数值方法。     

热-机耦合分析的有限元法及其应用

基于有限元分析的基本原理,建立了热-机耦合问题分析的有限元基本方程,并对工件挤压过程及摩擦制动问题进行了分析。算例表明,热-机耦合分析方法能很好地模拟受热结构的温度场和应力应变场,为结构设计和工艺设计提供依据。     

运输环境中某战术导弹结构振动特性分析

应用三维有限单元和导弹实体简化模型对一种战术导弹的结构振动特性进行分析，并动用ＡＮＳＹＳ有限元分析程序，计算得到了“自由－固支”条件下，导弹竖立状态的固有模态，取得了与试验和数据基本一致的结果，证明了所建模型物正确性，进而对运输环境中导弹水平支承条件下的固有频率和振型进行了分析计算，所得结果为导弹的使用可靠性分析提供了依据。     

高转速风扇叶片外物撞击损伤的定量评价方法

外物撞击是造成航空发动机风扇叶片变形、损伤甚至断裂的主要因素。针对外物撞击持续时间短、瞬间载荷大、损伤影 响因素多，难以进行定量损伤评价的问题，提出基于叶片损伤参数α的叶片损伤定量评价方法。以发动机风扇叶片受冰撞为例， 采用非接触叶尖计时测量方法，对叶片撞击产生的叶尖位移进行监测分析，验证了该方法的可行性。采用瞬态动力学分析方法对 叶片经受撞击过程进行全流程仿真模拟，并采用正交试验法定量研究了外物撞击过程中的撞击速度、叶片转速、撞击位置3种因 素对叶片损伤参数α的影响，拟合回归方程并绘制了这3种因素的3D响应曲面图，得到各因素的影响权重。结果表明：冰块速度 与撞击位置同时下降时，叶片损伤弱化效果显著。该方法可为大型风扇叶片抗外物打击性能设计和在役健康监测提供理论支撑。     

三维角联锁结构复合材料等效弹性性能有限元分析

在复合材料承载时变形协调的前提下,采用CAD软件绘制三维织物单元体几何模型,然后导入结构分析有限元软件包,对工程中常用的带衬经三维角联锁结构复合材料的弹性性能进行分析,并将0°和90°方向弹性性能预测值及实验值与取向平均法预测值进行比较。结果表明,采用的有限元方法所得预测值及实验值与取向平均法预测值之间具有很好的一致性。     

针栓式喷注单元膜束撞击雾化混合过程数值模拟

为了全面认识针栓式喷注器喷雾场结构，基于自适应网格加密技术和分三相计算的PLIC VOF（Piecewise Linear Interface Calculation Volume of Fluid）方法对针栓式喷注单元膜束撞击雾化混合过程进行了仿真分析，通过对两路推进剂分别进行界面追踪，获得了膜束撞击雾化混合过程的详细结构特征，与高速摄影试验结果定性定量对比均吻合较好，验证了数值方法的准确性。以此为基础对膜束撞击的喷雾场结构、撞击变形过程、流场涡结构、雾化破碎典型特征及破碎后的雾化混合分布特征进行了识别分析，结果表明：膜束撞击形成了液束未穿透液膜和液束穿透液膜2种不同的喷雾扇结构。膜束撞击形成的喷雾扇呈"Ω"形，膜束同时发生弯曲变形和横截面变形。另外，膜束撞击同时受到正压和剪切应力作用，导致了一系列复杂涡流现象，使得相互作用增强，雾化混合均增强，这也是膜束撞击喷注构型优于膜膜撞击的本质原因。最后，还发现膜束撞击喷雾场液滴分布呈现分区结构特征，分别是液束控制主导的上雾化区、液膜控制主导的下雾化区及夹在中间的混合区，实际中应兼顾雾化特性和混合特性，选取中等动量比膜束撞击，这可为针栓式喷注器的理论研究和工程设计提供重要参考。     

Lift coefficient prediction at high angle of attack using recurrent neural network

In this paper, identification of dynamic stall effect of rotor blade is considered. Recurrent Neural Networks have the ability to identify the nonlinear dynamical systems from training data. This paper describes the use of recurrent neural networks for predicting the coefficient of lift (C_Z) at high angle of attack. In our approach, the coefficient of lift (C_Z) obtained from the experimental results (wind tunnel data) at different mean angle of attack θ_mean is used to train the recurrent neural network. Then the recurrent neural network prediction is compared with experimental ONERA OA212 airfoil data. The time and space complexity required to predict C_Z in the proposed method is less and it is easy to incorporate in any commercially available rotor code.