Transient thermal behavior of stratospheric balloons at float conditions

The prediction of the thermal behavior of stratospheric balloons under varying environmental conditions is one of the key issues in the design and flight test of balloons. In this paper, a three-dimensional transient thermal model is developed to predict the thermal behavior of spherical stratospheric balloons. The diurnal variations of the skin and lifting gas temperatures at float conditions are discussed in detail. The further studies on the thermal behavior of stratospheric balloons are presented also.     

浅析歼八飞机机体结构设计的四个问题

对歼八飞机结构设计中出现的4个难点问题（机翼四梁接头耳片、原型机腹鳍、减速板、机尾罩尾尖）做一探讨性浅析。     

归一化参数蠕变模型的程序实现与验证

为了准确模拟实际构件的蠕变行为和应力松弛效应,在通用有限元程序环境下,利用其提供的用户可编程特性工具,将所发展的一种能完整描述蠕变3个阶段变形特征的归一化参数模型编制成用户子程序.考查了子程序计算结果与试验数据的差异、时间步长对计算结果的影响,并对不同规模有限元模型的计算耗时作了对比分析.针对变载(应力、温度)情形,在子程序中实现了时间硬化理论和应变硬化理论,并提出的介于两者之间的相对时间硬化理论.对带孔平板进行了实例计算,表明所发展的模型能够与有限元结果对实际结构进行蠕变模拟,计算结果的规律说明所发展的方法可较好地模拟实际构件的蠕变行为和应力松弛效应,验证了子程序的有效性.      

层合陶瓷基复合材料多尺度应力-应变计算模型

对层合陶瓷基复合材料(CMCs)的应力-应变行为进行了研究。基于多尺度分析方法,实现了由组分性能参数到层合陶瓷基复合材料整体应力-应变的计算。采用可实现单向纤维增强陶瓷基复合材料应力-应变计算的细观力学模型,由材料的细观组分性能计算出单向板的非线性弹性性能,并将单向板的弹性性能作为层合复合材料模型的输入参数,通过有限元法计算层合陶瓷基复合材料的整体应力-应变响应。与试验数据的对比表明:采用该模型可以实现层合陶瓷基复合材料在单调拉伸载荷及拉伸加卸载条件下应力-应变曲线的预测,其中数据的最大偏离为19.61%.      

提高直升机齿轮传动干运转能力的离子注入技术

根据直升机传动系统干运转能力的要求,用销盘试验机测定了M o离子注入量及润滑条件对齿轮钢12C r2N i4A摩擦副摩擦因数和磨损量的影响。结果表明:M o离子注入对摩擦因数影响很小,但可大大降低磨损率,对增强材料耐磨性有很好的作用。在FZG齿轮试验机上进行了齿轮改性前后的对比试验,结果表明,未改性齿轮干运转30 m in后齿面明显胶合,而改性处理后的齿轮经45 m in干运转试验,齿轮工作良好,齿面光整,仍然可以继续使用,具有很好的干运转性能。     

Regular features of the polar ionosphere characteristics from Digisonde measurements over Norilsk

Regular features of the polar ionosphere have been studied using its local empirical model of the electron density distribution in the bottomside ionosphere. The local empirical model was derived from the hand-scaled ionogram data recorded by DPS-4 Digisonde at Norilsk, Russia (69.4N, 88.1E; 60N GLAT, 166E GLON) for a 6-year period from December, 2002 to December, 2008. The paper describes the technique used to build the local empirical model and discusses its diurnal, seasonal, and solar activity specifications in comparison with the standard IRI-2007 climatological model for the same period of time, long-term observations from the European Incoherent Scatter UHF radar (1988–1999), and the high-latitude ionosondes data. Primary focus of the paper is behavior of the three F2 layer parameters: the F2 peak density (NmF2), the peak height (hmF2) and the bottomside thickness (B0). Special emphasis of the paper is the analysis of the winter anomaly manifestation at Norilsk and the peculiar diurnal–seasonal behavior of hmF2 under low solar activity, named as a “polar day effect”.     

氯离子和温度对铝合金在冷却液中腐蚀的影响

分别采用了动电位极化法、电化学阻抗法研究了不同温度下、不同氯离子浓度下防锈铝在模拟冷却液中的腐蚀行为,采用金相显微镜和扫描电镜对极化后防锈铝的表面特征进行了观察和记录。结果表明,氯离子吸附在防锈铝氧化膜表面,对氧化膜表面造成破坏。在一定温度下（30℃）,当氯离子浓度超过0.01mol/L时,中间产物吸附作用就会增强,阻抗谱中低频区出现感抗弧,点蚀萌生。随着氯离子浓度增高（超过0.01mol/L）,防锈铝的腐蚀加剧,耐腐蚀性能下降。随着温度的升高,阴极和阳极反应阻力变小,阳极金属铝的溶解和阴极氧还原速度增大,腐蚀速度增大。温度升高的同时,溶解氧含量下降,阴极反应受到抑制。与此同时扩散过程在整个腐蚀反应过程中的支配性降低,中间产物在氧化膜表面的吸附作用增强,从而导致低频容抗弧的出现。温度对点蚀形貌的影响主要体现在影响单个点蚀坑的几何大小,促进点蚀坑的生长。      

SiO2-水纳米流体在波壁管内流动特性的实验研究

实验研究了不同质量分数的SiO2-水纳米流体在波壁管内的流动特性,由于波壁管自身的结构特点,使流体在较小雷诺数下达到湍流状态,可以方便测出流体在层流、过渡流、湍流区的流动特性.研究发现:相同温度条件下,纳米流体的粘度随着质量分数的提高而增大;流动可视化照片显示纳米流体中由于内部纳米粒子的微运动促使流体均匀性更好;沿程阻力测试表明在层流区内摩擦系数随纳米流体质量分数的增加而增大,在过渡流和湍流区内摩擦系数随质量分数增加变化不大.     

Plasma Niobium Surface Alloying of Pure Titanium and its Oxidation at 900 ℃

A niobium-modified layer on pure titanium surface was obtained by means of double glow plasma surface alloying technique. The modified layer was uniform, continuous, compact and well adhered to the substrate. The niobium composition in the modified layer decreased gradually from the surface to the substrate. The oxidation behavior of the niobium-modified layer was investigated and compared with the untreated surface at 900 ℃ for 100 h. Characterization of the layers was performed using X-ray diffraction and scanning electron microscope, respectively. The test results show that the oxidation behavior of pure titanium was improved by niobium alloying process. Niobium has a positive influence on the oxidation resistance.     

Dynamic Response Analysis of Bird Strike on Aircraft Windshield Based on Damage-modified Nonlinear Viscoelastic Constitutive Relation

Damage-modified nonlinear viscoelastic constitutive equation and failure criterion are introduced and the three-dimensional incremental forms are deduced based on the updated Lagrangian approach. A simple tensile test model and a split Hopkinson pressure bar model are built to verify the accuracy of the subroutine implemented within the non-linear finite element program LS-DYNA. A numerical model of bird strike on windshield is established to study the responses of windshield under three different bird velocities at three sites. The bird is represented by a cylinder with a hemisphere at each end and the contact-impact coupling algorithm is used in this study. It is found that the implemented subroutine can properly describe the mechanical behavior of polymethyl methacrylate under low and high strain rates and large deformation, and can be used validly.