Space science education in Egypt and the 2006 solar eclipse

The space science research has been started in Egypt since 1910 by measuring the solar constant as indication of solar radiation at Helwan Observatory. The solar sunspot studies and its influence on the Nile flooding was erected and operated at Helwan as a first solar station in Egypt during 1957. Zeiss-Coude’ refractor was installed in 1964. Astronomy and space science educations started in Egypt at the university level since 1936 at Department of Astronomy and Meteorology of Cairo University. Undergraduate and graduate education in Egypt will be discussed in this work.     

磁悬浮框架飞轮磁轴承技术研究与发展现状

对磁悬浮框架飞轮(MSGFW)和高精度磁轴承研究现状及其未来发展进行了详细阐述。根据转子悬浮力类型，将磁悬浮框架飞轮分为磁阻力构型、洛伦兹力构型和混合力构型，并结合三种构型论述了国内外框架飞轮的发展过程。在此基础上，对球面磁阻力磁轴承和洛伦兹力磁轴承进行了详细介绍，并结合磁路图分析其工作原理，比较了同类磁轴承的优劣。展望了磁悬浮框架飞轮与高精度磁轴承的未来发展方向，指出高动态响应检控共位平动球面磁阻力磁轴承，标准磁悬浮动量球和磁悬浮控制敏感球是磁悬浮框架飞轮的研究重点。     

大后掠机翼翼尖导弹动力响应空测与数据分析

 <正> 大后掠机翼翼尖挂导弹对外界干扰的动力响应很灵敏,这种干扰主要来自随机不稳定气流或各种突加载荷。为保证安全和防止导弹失控,摸清其响应值非常必要;除理论计算外,对可能遇到的不平稳气流和突加载荷在翼尖导弹上的动力响应进行了空测,并用频谱分析和功率谱密度分析处理了空测数据,制订了翼尖导弹振动与冲击试验谱,进行了地面试验与空中打靶试验,获得了满意结果。     

人工辅助心脏用永磁轴承盘式无刷电机设计与研究

介绍了一种应用于人工辅助心脏的永磁轴承无位置传感器盘式无刷直流电动机的结构与电磁场仿真计算方法及结果,并对其温度场进行仿真计算。该电机体积重量小,无机械轴承,避免了对血液的破坏,且运行安全可靠。     

中心承力筒数控加工工艺

通过制定合理的数控加工工艺方案,实现了中心承力筒的数控加工,有效保证了孔的加工精度和

表面质量,提高了零件的加工效率。通过在5 轴联动数控加工中心上实际加工,证明该数控加工工艺切实可

行。

     

推力室逆置点火瞬时真空舱流场数值与试验研究

针对高空模拟舱内逆向布置的推力室点火瞬时过程中舱内压力的变化规律进行了理论和数值仿真分析,推力室高速气流的动能是推力室短程点火过程中舱内压力大幅上升的主要原因.为保证推力室点火时舱内的真空度,需要在推力室出口配置导流装置将燃气导出真空舱.对单台和4台并联推力室进行点火试验,试验表明：采用燃气导流能够较好保持舱内真空度,是整机多推力室高空模拟试验的新思路.     

Performance of a small and low-cost chamber to simulate lunar surface environment

The performance of a small and low-cost metal chamber built to simulate the pressure and temperature conditions of lunar surface was assessed and the results are presented. This chamber is intended for studying the physical properties of lunar surface and subsurface (using soil simulants) and also to validate the technology readiness of certain newly developed payloads planned for future lunar surface missions (Lander/Rover). It is possible to reach down to ∼10⁻⁷ Pa under specific conditions and maintain the temperature of the sample under investigation to lunar day and night temperatures. The designed system has been subjected to various tests to evaluate its performance and suitability for carrying out experiments in a simulated lunar environment.     

Solar activity dependence of total electron content derived from GPS observations over Mbarara

Vertical total electron content (VTEC) observed at Mbarara (geographic co-ordinates: 0.60°S, 30.74°E; geomagnetic coordinates: 10.22°S, 102.36°E), Uganda, for the period 2001–2009 have been used to study the diurnal, seasonal and solar activity variations. The daily values of the 10.7 cm radio flux (F_10.7) and sunspot number (R) were used to represent Solar Extreme Ultraviolet Variability (EUV). VTEC is generally higher during high solar activity period for all the seasons and increases from 0600 h LT and reaches its maximum value within 1400 h–1500 h LT. All analysed linear and quadratic fits demonstrate positive VTEC-F_10.7 and positive VTEC-R correlation, with all fits at 0000 h and 1400 h LT being significant with a confidence level of 95% when both linear and quadratic models are used. All the fits at 0600 h LT are insignificant with a confidence level of 95%. Generally, over Mbarara, quadratic fit shows that VTEC saturates during all seasons for F_10.7 more than 200 units and R more than 150 units. The result of this study can be used to improve the International Reference Ionosphere (IRI) prediction of TEC around the equatorial region of the African sector.     

Cutting the bread

Why the draft Treaty on the Prevention of the Placement of Weapons in Outer Space, the Threat or Use of Force Against Outer Space Objects (PPWT) will not work - whereas the Code of Conduct for Outer Space Activities may.     

波形合成的方向处理

波形合成中方向问题的核心是相位计算。本文作了分析