抗辐照通用扩展SiP芯片设计

研究微小卫星综合电子系统的SiP技术实现方法。首先介绍微小卫星综合电子系统结构的组成和采用SiP技术的必要性，然后对综合电子系统进行功能模块划分，并对其通用扩展模块进行详细的SiP设计，包括抗辐照器件选型、原型验证、SiP原理图、基板管壳一体化设计、建模仿真、制造加工、实装测试验证等，通过SiP技术实现了一种星载综合电子系统中通用扩展SiP芯片产品，经过实际验证测试，在保证模块功能和性能的前提下，整体模块重量从230 g减轻到48 g，体积由180 mm?130 mm?17 mm减小到46 mm?46 mm?8 mm，很好地满足了星载功能模块小型化、轻量化设计需求。     

Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

Measuring the matter distribution within z = 0.2 cluster lenses with XMM-Newton

We present an analysis of seven clusters observed by XMM-Newton as part of our survey of 17 most X-ray luminous clusters of galaxies at z  0.2 selected for a comprehensive and unbiased study of the mass distribution in massive clusters. Using the public software FTOOLS and XMMSAS we have set up an automated pipeline to reduce the EPIC MOS and pn spectro-imaging data, optimized for extended sources analysis. We also developped a code to perform intensive spectral and imaging analysis particularly focussing on proper background estimate and removal. XMM-Newton deep spectro-imaging of these clusters allowed us to fit a standard β-model to their gas emission profiles as well as a standard MEKAL emission model to their extracted spectra, and test their inferred characteristics against already calibrated relations.     

复合材料层板中就位横向拉伸强度的研究

本文利用弹性力学和断裂力学方法对纤维增强复合材料的横向拉伸强度进行了分析，其中考虑了９０度开裂层厚度和开裂邻层的约束效应的影响，推导出正交各向异性对称铺层中昨合就位横向拉伸强度的数学表达式，得出开裂层的厚度和约束邻层铺设角对就位横向拉伸强度都有影响的结论，理论计算与Ｆｌａｇｇｓ实验结果吻合较好。     

关于危险品运输的紧急救援

危险品运输是技术要求最高的一类特种货物运输。在运输、装卸及贮存保管过程中,稍有不慎便会发生事故,造成人身伤亡和财产毁损。笔者认为:灾害=事故十损失。严格执行危险品运输规章,减少事故发生率,从技术上进行要求。仅是问题的一个方面。而另一方面还应立足于事故发生后的紧急救援,以最大限度地减少损失,两者并重才不致酿成灾害。为此,提出了建立“危险品运输紧急救援中心”的建议。     

离心铸造Al—20wt%Si合金自生表面复合材料的组织与性能

采用热模金属型离心铸造Al－20wt％Si合金，获得了外层聚集粗大初晶Si、中层为共晶组织、内层聚集细小初晶Si的自生三层表面复合材料。考察了复合材料的组织形貌，检测了复合材料的硬度和耐性，分析了复合材料的断裂模式。     

四喷管射流流场的数值模拟及分析

本文分析了ENO格式的特点，并应用于全NS方程的迁移项和压力项，模拟了三维射流，首先计算了四喷管射流干扰流场，给出了相应的计算结果，指出了其四股射流外部有形成类似一股射流波系的趋势，而内部四股射流始终存在并相互作用，且伴随流对内部干扰流场有重要影响；然后计算了四股射流流入圆管内的流场，给出了壁面和截面物理量的分布，分析了其拓扑结构。     

加扰流环双组元LAE的流场数值仿真

采用交错网格系统SIMPLE算法和二维两相流场燃烧模型，对有不同形状(矩形、圆弧三角形及其混合结构)和位置扰流环的某双组元液体远地点发动机(LAE)流场进行了数值仿真计算。结果表明，扰流环对提高燃烧效率作用明显。环的位置应适中(不能过于靠近头部和喷管出口处)，其高度越大，燃烧效率越高。另外，矩形环的压力损失大于三角形环。     

大型复合材料结构优化设计方法研究

建立了适合于大型复合材料结构的优化设计方法，该方法在复合材料结构有限元分析的基础上对复合材料结构进行优化设计。在建立有限元模型时应用了区域划分技术，然后对结构分两级进行优化：第一级是对结构的铺层角度进行优化。第二级对结构的铺层厚度进行优化。最后，以工字梁结构为例，进行了算法验证。     

自适应控制方法的直接命中目标本体的平行接近制导律

本文在最少量测条件下采用视线角速度ｑ趋于零的指标函数和低阶等效辨识模型与快速自适应控制方法实现了战术导弹的平行接近制导律。这种最优制导律可以实现直接命中目标本体，实现一弹多用，可以用于反导弹的控制。能使制导装置简化并使其尺寸和重量减小，算法简单易于工程使用。经过大量数学和半实物仿真试验表明，上述成果可应用于实际工程当中。