SINS／GPS组合系统的蒙特卡洛仿真

以考虑位置误差相关项的伪距率观测模型，对遥感中使用的SINS/GPS为距、伪距率组合系统进行了蒙特卡洛仿真。结果表明，组合系统的长期位置精度能达到5m以内；GPS数据更新率低于SINS，在GPS测量时间间隔内，组合系统的性能仅由SINS决定，虽然SINS的误差随时间积累，但在GPS测量时间间隔为秒数量级的情况下，即使采用中等精度的惯性的误差随时间积累，但在GPS测量时间间隔为秒数量级的情况下，即使采用中等精度的惯性仪表，其相对位置精度可达到厘米级（这里相对位置精度指组合系统在GPS测量时间间隔内位置误差的变化范围）。     

应用加权中值滤波法检测薄壁梁式挠性器件下摆量

应用加权中值滤波法对薄壁梁式挠性器件下摆量进行高准确度CCD检测。薄壁梁式挠性器件在测量过程中测量图像存在高频抖动现象,因此测量准确度不高,运用加权中值滤波后使用最小二乘法细分技术,可以在实现提高测量准确度的同时,消除高频抖动带来的误差,从而可以有效提高CCD测量薄壁梁式挠性器件下摆量的准确度。实验表明,该方法比传统测量方法准确度提高20倍以上。     

基于双滤波器的高精度目标跟踪估计方法

针对连续推力的合作航天器,采用双重无迹卡尔曼滤波(DUKF)算法估计其状态和加速度.通过状态滤波器和参数滤波器的配合,提升滤波精度,完成运动状态和参数的估计,从而实现合作目标的运动轨迹跟踪.与合作航天器相比,非合作航天器存在大小未知、发生时刻未知的机动,无法获得加速度,且信息获取和运动状态的估计难度大.针对非合作航天器...     

一种基于数字信号处理的阻抗参数测量新方法

利用数字信号处理理论与技术提出了一种阻抗参数测量新方法,即采用任意的周期信号作为测量的激励信号,激励信号的信噪比可以很低;采用高镜频抑制比的数字正交采样滤波器得到被测阻抗和标准阻抗上的电压采样序列的同相分量与正交分量,并据此确定被测阻抗参数,该方法能得到较高的阻抗参数测量精度和较宽的测量范围,并且硬件电路实现比较容易.文中给出了计算机仿真分析和硬件实现系统的实验结果,证明了新方法的有效性和正确性.     

组合式三相双Buck宽变频逆变器

介绍了两态滞环电流控制型双Buck逆变器的电路结构和工作原理,对系统内环进行建模和分析。从理论上分析得到电流内环可以把LC二阶系统降阶为一阶系统,并将电流内环近似等效为一阶惯性环节,其时间常数主要取决于系统滤波电感的大小,并提出了一种滞环电流控制型逆变器输出滤波器的解耦设计方法,对宽变频输出时的输出滤波器进行优化设计。在此基础上进行三相组合式实验研究,通过数字控制技术实现逆变器系统具有360~800 H z宽变频输出。最后通过三相6 kVA原理样机,验证了本逆变器系统在全频率范围得到良好的输出电压波形和较高的效率,具有更广的应用前景。     

图像序列直线提取和匹配时Hough变换的应用研究

本文利用Hough变换的点线对偶性,将对图像序列中的特征直线的匹配转化为在参数空间中对特征点运动轨迹的参数估计,设计采用卡尔曼滤波器对运动目标进行初步跟踪,通过建立模板与图像的匹配相关系数判定搜索到的特征点的精确坐标。实验结果表明,该方法具有较好的跟踪结果。     

一种用于深空探测的Chirp变换频谱分析仪设计与实现

根据深空探测对频谱分析仪抗辐射、高分辨率、低功耗的需求,研究一种基于Chirp变换的高分辨率频谱分析仪设计及其实现.利用中心频率为1GHz、带宽为400MHz、色散时间为10μs的声表面波滤波器,提出了一种模拟和数字相结合的高分辨率频谱分析仪设计方案,并搭建原理实验系统完成了实测验证,其分析带宽为400MHz,频率分辨率达到152kHz,功耗约为3.6W.分析了压缩线器件非理想特性对频率分辨率的影响,利用实测压缩线频率响应特性获得幅度和相位补偿曲线,对展宽线信号进行幅相失配补偿.仿真结果表明,该补偿方法可将频率分辨率提高至108kHz.     

平台摇摆对卡尔曼滤波跟踪精度的影响

通过建立目标相对运动坐标系和目标相对运动观测模型,研究了在平台摇摆影响下,跟踪系统观测到的目标运动状态的变化。在分析捷联垂直基准补偿原理的基础上建立了捷联垂直基准平台摇摆角补偿模型,建立的模型结合捷联垂直基准系统的测量能力对其补偿算法进行了理论推导,使模型适用于实际捷联垂直基准系统。通过建立模型以及仿真研究了平台摇摆作用下卡尔曼滤波跟踪精度的变化,指出了摆造成卡尔曼滤波跟踪精度降低甚至离散的主要原因在于模型误差增大。设计仿真实验验证了结论的正确性,为进一步改进跟踪手段提供了理论参考。     

A cost driven predictive maintenance policy for structural airframe maintenance

Airframe maintenance is traditionally performed at scheduled maintenance stops.The decision to repair a fuselage panel is based on a fixed crack size threshold,which allows to ensure the aircraft safety until the next scheduled maintenance stop.With progress in sensor technology and data processing techniques,structural health monitoring (SHM) systems are increasingly being considered in the aviation industry.SHM systems track the aircraft health state continuously,lead ing to the possibility of planning maintenance based on an actual state of aircraft rather than on a fixed schedule.This paper builds upon a model-based prognostics framework that the authors developed in their previous work,which couples the Extended Kalman filter (EKF) with a first order perturbation (FOP) method.By using the information given by this prognostics method,a novel cost driven predictive maintenance (CDPM) policy is proposed,which ensures the aircraft safety while minimizing the maintenance cost.The proposed policy is formally derived based on the trade-off between probabilities of occurrence of scheduled and unscheduled maintenance.A numerical case study simulating the maintenance process of an entire fleet of aircrafts is imple mented.Under the condition of assuring the same safety level,the CDPM is compared in terms of cost with two other maintenance policies:scheduled maintenance and threshold based SHM maintenance.The comparison results show CDPM could lead to significant cost savings.     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.