Optimization and design of an aircraft's morphing wing-tip demonstrator for drag reduction at low speeds,Part Ⅱ-Experimental validation using Infra-Red transition measurement from Wind Tunnel tests

In the present paper, an ‘in-house' genetic algorithm was numerically and experimentally validated. The genetic algorithm was applied to an optimization problem for improving the aerodynamic performances of an aircraft wing tip through upper surface morphing. The optimization was performed for 16 flight cases expressed in terms of various combinations of speeds, angles of attack and aileron deflections. The displacements resulted from the optimization were used during the wind tunnel tests of the wing tip demonstrator for the actuators control to change the upper surface shape of the wing. The results of the optimization of the flow behavior for the airfoil morphing upper-surface problem were validated with wind tunnel experimental transition results obtained with infra-red Thermography on the wing-tip demonstrator. The validation proved that the 2D numerical optimization using the ‘in-house' genetic algorithm was an appropriate tool in improving various aspects of a wing's aerodynamic performances.     

低速风洞中的洞壁干扰计算

本文按照文[1]的方法,通过壁压测量影响函数法计算洞壁干扰。文中对H/B=0.75、0.8333、1.00,以及矩形切角风洞进行了计算,并在H/B=0.8333的风洞中作了修正试验。计算与试验表明,本文的计算是可靠的,提供的曲线可供实际使用。     

静止侧压力系数及其试验方法

静止侧压力系数是岩土工程中一个非常重要的参数，本文分析和讨论静止侧压力定义及其试验方法以及相关试验设备，以便引起广大学者关注静止侧压力系数确定法及其选取等方面的研究。     

铝箔腐蚀微机集散控制及优化

提出了铝箔腐蚀过程的微机集散控制系统及其优化的实现方法；介绍了系统的构成和有关软件设计的方法；还详细介绍了采用微机控制和ＳＮ比正交试验优化相结合对铝箔腐蚀过程进行计算机优化试验及控制，并取得了良好的经济效益。     

适用于软体冲击动位移测量的磁敏检测系统

介绍了一种适用于诸如飞行器鸟撞实验的软体冲击动位移检测系统，提出了用霍尔磁敏器件为位移传感元件，新型线性补偿电路为中间处理环节的高频动位移非接触式测量方法。这一测试系统被用于某型号飞行嚣雷达罩的鸟撞实验位移测量中，效果十分理想。     

Experimental investigation on ice-breaking performance of a novel plasma striker

Aircraft icing has long been a plague to aviation for its serious threat to flight safety.Recently, researches about a newly proposed deicing method based on Plasma Synthetic Jet Actuator(PSJA) have just started. To meet the requirements of in-flight deicing, structure of PSJA needs to be adjusted. This paper completed the detailed design and experimental validation of a novel plasma striker, which was a modified version of PSJA. Influences of mass of the moving part and rod shapes on the ice-br...     

Gamma astrometric measurement experiment (GAME) – Science case

We report here on the science case of a concept for a satellite orbiting at 1 AU from the Sun and using a baffled Fizeau interferometer to look as close as possible to its limb. This configuration, and the need for looking nearby the Sun, is required for the main scientific driver of the mission, namely the measure of the γ parameter of the Parameterized Post-Newtonian formulation to the 10⁻⁶–10⁻⁷ level at least. This would lead to an accurate test of the General Theory of Relativity against other alternative theories of gravity, and set stringent constraints on some of the most significant issues of Astrophysics like those involving exotic forms of dark matter and dark energy. Exploiting the possibilities offered by the observation strategy, it is also possible to target other interesting scientific goals. One is, again, in the realm of General Relativity and aims at measuring the light deflection nearby the Giant Planets to detect asymmetric effects induced by their quadrupoles, predicted by GR but never measured so far. Others can be found in the observation of selected extrasolar systems where, e.g., the astrometric and photometric capabilities of GAME will help to improve on the knowledge of the brown-dwarf regime and on the search for exo-planets with the transit method, respectively.     

风洞投放试验技术的研究现状与应用综述

多体分离是航空、航天和武器系统总体部门一直极为关注的关键问题,多体间的流场干扰效应产生的气动力和力矩对悬挂物分离相容性有重要影响,基于运动动力学相似的风洞投放试验技术是预测和评估多体分离是否相容的一种非定常试验方法。根据飞行器多体分离相容性的研究需求,结合作者在风洞投放试验技术的研究成果和经验,对风洞投放试验技术的国内外研究现状进行综述。首先回顾了风洞投放试验技术的发展历史,然后对低速和高速风洞投放试验的相似准则及缩比关系进行详细地论述与分析,进而对风洞投放试验的几个关键技术进行综述,最后对风洞投放试验技术存在的问题提出思考与展望。     

冲击载荷作用下38CrMoAl渗氮钢损伤机理和耐腐蚀性能

为研究38CrMoAl渗氮钢材料在冲击载荷与海洋环境侵蚀共同作用下的损伤机理和耐腐蚀性能,对渗氮处理前后的38CrMoAl钢材料进行了冲击加载试验和腐蚀性能测试。研究发现渗氮38CrMoAl钢材料在高应变率下具有较强的正应变率敏感性。在冲击载荷作用下,试件表面渗氮层出现裂纹,并伴随着渗氮层的部分脆性剥落,但裂纹长度均在500~700 μm,裂纹只在渗氮层中扩展,并没有继续延伸至非渗氮层的金属基体内部。渗氮处理提高了材料表面硬度和强度,但降低了韧性。电化学测试结果表明渗氮处理显著提高了材料的耐腐蚀性能,其自腐蚀电位相对于未渗氮试件由-726.24 mV正移至-174.42 mV。但冲击加载后的渗氮试件由于表面渗氮层的破损,部分金属基体露出并与未发生破坏的表面形成电势差,进而发生较为强烈的电偶腐蚀。扫描开尔文探针测试结果表明,渗氮件表面阴阳极电位差及电位分散程度相对于未渗氮件增大,渗氮件更易发生局部腐蚀。冲击加载改变了渗氮层的表面状态,阴阳极电位差增加,使材料表面腐蚀变得更加不均匀。对试件耐腐蚀性能进行了盐雾试验验证,盐雾试验结果与电化学测试分析结果相一致,在舰载机维护保养中,应关注受冲击部位渗氮层的裂纹检查,并做好相应的防腐处理。