发动机动力模拟风洞试验中的空气桥技术

介绍了发动机动力模拟风洞试验中的空气桥设计技术和影响修正方法.通过自由度分析,选择了合理空气桥布局,采用有限元方法对空气桥关键受力梁进行了优化,建立了空气桥天平一体化数值模拟技术,使得空气桥和天平刚度更加匹配.通过这些设计及优化使得空气桥的作用力最小,并具有较强的克服压力影响、温度影响的能力.通过试验建立了空气桥附加刚度影响、内部压力影响、温度影响和内部流量影响的修正方法,进一步减小了空气桥对天平的影响.在8m×6m低速风洞进行了某大展弦比飞机全模涡扇动力模拟器(TPS)短舱动力模拟试验.试验结果重复性好,阻力系数精度达到0.0003,和相关文献吻合.这表明空气桥技术是成功的,满足了TPS短舱动力模拟试验要求.      

吸气式高超声速飞行器内外流同时测力试验

为研究吸气式高超声速飞行器新型测力试验技术的可行性,在马赫数Ma=6、高度H=27km模拟飞行环境下开展了风洞试验。以轴对称吸气式高超声速飞行器无舵翼简化构型为研究对象,通过合理的试验系统设计解决内外流解耦关键技术,采用两个环式六分量天平在同一车次上测量模型内外流气动力载荷。试验结果表明:内外流气动力天平测量数据和全模气动力数据准确反映了内外流解耦、内外流窜流、进气道起动/不起动以及溢流影响等物理现象;从物理上实现了内外流解耦;内流气动力对全机气动性能贡献大;内外流解耦、进气道起动时,气动力数据准确、重复性好;窜流产生的传力属于内力。试验证明,同时测力试验技术可行,为解决内外流气动数据源于不同试验所致的不确定性问题提供了有效手段。     

某型民用飞机电源系统负加速度试飞研究

首先对民用飞机电源系统负加速度试飞进行简要说明,提出民用飞机电源系统负加速度试飞的原因和目的。其次对电源系统负加速度试飞条件、试飞方法和试飞程序进行说明。对电源系统负加速试飞结果进行分析评估,表明电源系统设计是满足设计要求和民用航空标准要求的。最后对负加速度试飞中注意事项进行了详细说明,为其它机型飞机进行负加速度试飞提供借鉴。     

机载燃油惰化技术及标准研究

针对目前广泛应用于飞机燃油箱起火和爆炸防护的机载燃油惰化系统,详述了国外机载燃油惰化技术的发展历程,并介绍了国内发展现状,提出影响机载燃油惰化系统设计的关键因素。在此基础上,简述了国内外标准情况,提出了制定我国机载燃油惰化系统标准的建议。     

直升机起飞性能试飞方法研究

当直升机可用功率不足以维持地效外悬停时,直升机可以利用地面效应增速至一定前飞速度完成起飞。研究了地面效应和前飞速度对直升机剩余功率的影响,阐述了利用剩余功率进行有地效起飞的原理。介绍了3种有地效起飞方式,并使用水平加速—定速爬升法进行了起飞性能飞行试验,得到了水平越障距离随爬升速度的变化曲线,对飞行试验结果进行了分析,得到了有益的结论。     

直升机运输效能试飞技术研究

对直升机运输效能进行了理论分析,给出了直升机各项运输效能指标的计算方法。利用试验机进行了直升机运输效能试飞,最后给出了直升机各项运输效能指标的飞行试验结果。对于后续的直升机运输效能试飞和直升机运输效能评估等工作具有重要的参考价值。     

美国NASA的适航气动研究及启示

飞机适航管理是以民用航空器为对象的强制性、法规性和技术性飞行安全管理。简述美、欧等世界航空大国飞机适航管理及适航规章;研究美国NASA在飞机适航领域开展的气动研究工作;探讨我国国家空气动力试验机构服务于适航工作的途径。     

浅谈基于IPDT的民用飞机重量控制技术

在民机研制过程中,有效地实施重量控制对于项目的成功非常关键。飞机超重不仅会导致设计和运营成本的增加,也将无法实现既定的商载和航程等设计指标。从各部门与重量控制工作的联系出发,结合某型民用飞机的设计实践,介绍了产品联合研发团队(IPDT)模式下重量控制的工作内容、工作流程和常用的减重方法,为民机的重量控制工作提供借鉴和参考。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.