聚合物基纳米复合材料的理论研究进展

讨论了国内外关于聚合物基纳米复合材料的理论研究,包括聚合物/层状结构硅酸盐PLS(Polymer-Layer Silicate)纳米复合材料的热力学、动力学和微观力学,以及聚合物/颗粒状无机纳米复合材料的纳米微粒分散原理、纳米粒子尺寸与复合材料性能之间的关系等.      

EXPERIMENTAL STUDIES ON SWIRLING AND RECIRCULATING TWO-PHASE FLOW FIELD IN A COLD MODEL OF DUAL-INLET SUDDEN-EXPANSION COMBUSTOR

The axial and tangential velocities of gas and particle phases and particle concentration for turbulent swirling and recirculating gas-particle (simulating gas-droplet) flows in a cold model of a dual-inlet sudden-expansion combustor with partially tangential central tubes, proposed by the present authors, were measured by using a 2-D LDV system and a laser optic fiber system combined with a sampling probe. The results show that there are both gas and particle strongly reverse flows and swirling flows in the head part of the combustor. The velocity slip between gas and particle phases is remarkable. The particle concentration is higher near the wall and lower near the axis. There are two peaks in the concentration profiles near the inlet tubes. The above-obtained flow characteristics are favorable to ignition, flame stabilization and combustion. The results can also be used to validate the numerical modeling.     

基于自动代码生成技术的永磁同步电机控制

为缩短电机控制系统软件开发周期,减少手写代码人力消耗,将自动代码生成技术应用于机载燃油泵用电机控制系统的软件开发中,介绍了自动代码生成技术的特点及开发流程,在MATLABSimulink环境下搭建了基于矢量控制算法的永磁同步电机系统控制模型,通过实验将模型自动生成为嵌入式代码,成功的实现了电机的闭环控制,极大地提高了开发效率,达到了预期成果。     

微粒子喷丸技术研究进展

微粒子喷丸因其采用的弹丸介质尺寸小,具有强化基体表面并降低表面粗糙度的优点,已成为航空、能源动力等领域中一项重要的表面强化技术.目前对于该技术的研究仍处于对其强化机理的试验论证阶段,还未有完整的理论体系.对微粒子喷丸技术的原理和特点进行了综述,讨论了微粒子喷丸的强化机制,阐述了目前微粒子喷丸技术的研究现状及在各类材料中...     

压电驱动自耦合射流流动特性实验

为了研究压电驱动狭缝喷口自耦合射流的流动特性,采用PIV、热线风速仪测试手段,对自耦合射流激发器在不同激励因素下的流场和速度场分布进行了实验和分析.结果显示,自耦合射流在狭缝出口处产生了反向涡对,随着自耦合射流的发展,射流呈现出在喷口短轴方向急剧向两侧扩展、而在喷口长轴方向先收缩后缓慢扩展的流动特征;自耦合射流的速度分布在法线方向呈现先上升后下降的趋势,在z/b=10左右速度达到最大值;在射流展向上,短轴方向速度呈规律的对称分布和速度自模的特征,而长轴方向速度近喷口区域呈现马鞍状分布,随着法向距离增加这种趋势消失.研究中发现,激发器存在两个谐振频率,在谐振频率激发下自耦合射流的速度和涡量比较大.与常规射流相比,自耦合射流显示出了独特的流动特性.     

飞机自动配电系统建模仿真研究

飞机配电系统的自动化是现代飞机供电系统发展的重要方向。针对目前对飞机自动配电系统建模仿真研究较少的现状,本文建立了完整的飞机自动配电系统仿真模型并进行了仿真研究。以中国国家军用标准(以下简称国军标)飞机供电特性为依据,建立了飞机配电系统中各主要部件以及故障产生模块的数字模型,推导了各部件控制信号的逻辑关系,提出了一种锁定关断控制信号的建模新方法。将所建模型应用于某新型飞机的配电系统中进行仿真,通过对过压、欠压两种故障情况下仿真与实验结果的对比,证明了所建模型能很好实现非正常状态下的保护功能。将所建立的模型略做修改,即可移植到其他飞机配电系统中,可见模型通用性强。     

协同多目标攻击空战决策的启发式粒子群优化算法

利用协同多目标攻击战术的特定知识,并结合粒子群算法,提出了一种用于空战决策的启发式粒子群算法。该算法利用粒子群算法对解空间探索能力强,容易跳出局部最优陷井及启发式算法局部搜索能力强的优点,快速、高效地对全局最优值进行搜索。该算法通过求解友机导弹对目标的最优分配来确定空战决策方案。仿真实验结果表明。本文算法对最优空战决策方案的搜索性能明显优于普通粒子群算法及其他两种遗传算法。     

Simulation study of motion of charged particles trapped in Earth’s magnetosphere

This article aims to understand the motion of the charged particles trapped in the Earth’s inner magnetosphere. The emphasis is on identifying the numerical scheme, which is appropriate to characterize the trajectories of the charged particles of different energies that enter the Earth’s magnetosphere and get trap along the magnetic field lines. These particles perform three different periodic motions, namely: gyration, bounce, and azimuthal drift. However, often, the gyration of the particle is ignored, and only the guiding center of the particle is traced to reduce the computational time. It is because the simulation of all three motions (gyro, bounce, and drift) together needed a robust numerical scheme, which has less numerical dissipation. We have developed a three-dimensional test particle simulation model in which the relativistic equation of motion is solved numerically using the fourth and sixth-order Runge-Kutta methods. The stability of the simulation model is verified by checking the conservation of total kinetic energy and adiabatic invariants linked with each type of motion. We found that the sixth-order Runge-Kutta method is suitable to trace the complete trajectories of both proton and electron of a wide energy range, 5 keV to 250 MeV for L = 2 – 6. We have estimated the bounce and drift periods from the simulations, and they are found to be in good agreement with the theory. The study implies that a simulation model with sixth-order Runge-Kutta method can be applied to the time-vary, non-analytical form of magnetic configuration in future studies to understand the dynamics of charged particles trapped in Earth’s magnetosphere.     

微机控制的外挂物投放试验自动化系统

本文扼要阐述飞行器外挂物投放试验中微机控制的测控自动化系统的原理、性能、软硬件设计和主程序流程图。     

特征结构配置法在输出反馈控制器设计中的应用

现代控制理论中的特征结构配置法(Eigenstructure Assignment),揭示了线性定常系统状态反馈控制规律的设计能力,并向设计者提供了充分的设计自由度。本文介绍了一种利用特征结构配置法进行输出反馈控制器设计的算法。当n阶r个输入m个输出的线性定常系统满足关系r+m>n时,运用该算法可以获得配置任意希望闭环特征值集合的线性输出反馈控制规律,并具有一定的特征结构配置自由度;对于不满足r+m>n的系统,利用积分器增广可以获得比Luenbetger状态估计器阶数低的动态输出反馈控制器,以实现闭环特征值任意配置。该算法容易用数字计算机编程实现。