基于大气阻力实时辨识的Drag-free卫星最优控制研究

研究了基于大气阻力实时辨识的Drag-free卫星最优控制。将Drag-free卫星和其内部的验证质量等效为两颗内、外编队卫星并建立动力学方程,推导了基于卫星和验证质量的相对运动状态观测值反演大气阻力的算法。建立了状态最优调节器模型,采用动态规划求解经典的二次型最优控制。对低轨圆轨道Drag-free卫星的仿真计算结果表明方法的求解精度较高,计算消耗较小。     

BLKF方法抑制MEMS惯性传感器随机噪声

针对微机电系统（MEMS）惯性传感器应用卡尔曼滤波（KF）处理数据时随机噪声难以估计的缺点,提出一种基于贝叶斯拉普拉斯卡尔曼滤波（BLKF）的随机噪声更新方法。该方法利用拉普拉斯近似算法,将贝叶斯边缘分布近似表示,能够避免贝叶斯方法更新过程中由于数据维数较大造成后验边缘分布较难估计的情况,提高对随机噪声的更新效率和精度。通过陀螺仪转台实验采集实验数据,运用KF与BLKF分别滤波。对比滤波结果可发现,BLKF比KF能更好地反映真实角速度状态。同时,在陀螺仪角速度变化时,BLKF的可靠性和准确性更高,滤波效果更具优势,能够达到抑制MEMS惯性传感器随机噪声的目的。     

基于预测零控脱靶量的拦截器中制导段导引

针对三维空间内的高速飞行目标,提出了一种基于预测零控脱靶量的中制导段导引方法。建立了拦截器与目标的相对运动关系模型,分析了确定修正轨道的约束条件,并在此基础上推导出修正轨道根数的计算方法。同时根据待增速度给出了推力定向和推力发动机工作时长的确定方法。仿真结果表明,该方法能有效实现拦截器中制导段的制导控制。     

星敏感器低频误差与陀螺漂移离线校正方法

获取高精度事后姿态数据是提高遥感平台成像质量的必要条件之一,离线处理可有效降低敏感器测量误差,从而获得更高的姿态确定精度。基于滤波的校正方法中,星敏感器低频误差(LFE)与陀螺漂移将产生耦合影响导致校正精度低,本文针对该问题推导了耦合误差的数学模型,并设计了一种两步双向平滑事后处理算法,将陀螺漂移与低频误差分两步校正,通过反复滤波剥离陀螺漂移与低频误差。同时,针对低频误差参数收敛速度慢、噪声参数调节困难的问题,利用一种基于极大似然估计(MLE)的固定窗口自适应双向滤波算法进行处理以获得更好的噪声估计,提高了收敛速度和收敛精度。文中仿真工况下,离线姿态确定精度可达到0.8″(3σ),低频误差参数完全收敛时间不超过4个轨道周期。     

大型平台的惯性稳定与地理坐标系姿态跟踪

介绍了一种大型两轴稳定平台的惯性稳定和地理系姿态跟踪原理,建立了稳定平台俯仰框架和横滚框架的运动学模型和动力学模型,进行了稳定平台横滚通道的角速度回路和角位置回路设计,仿真分析了姿态角测量误差作用下的稳定平台姿态跟踪性能,与利用加速度计反馈实现调平的两轴阻尼稳定平台进行对比,比对结果验证了本文设计的控制系统在水平姿态跟踪速度和抗干扰能力上的优势.平台样机进行了姿态跟踪测试,结果验证了结合定位定向系统(POS)的稳定平台惯性稳定和姿态跟踪控制方法可行.     

低轨道卫星GPS精密定轨动力学方法的研究

结合低轨卫星简化动力学定轨算法,以及不同几何信息精度条件下的纯几何定轨和动力定轨精度比较,定量分析星载双频GPS实现精密定轨过程中的主要因素,得到星载GPS接收机性能设计所需的关键技术指标,为卫星精密定轨系统的顶层设计提供了科学合理的参考依据。     

8m×6m 风洞测控处系统

８ｍ×６ｍ风洞测控处系统以ＶＡＸ－Ⅱ为上位机,通过ＱＢＵＳ总线连接数据采集、速压控制、模型姿态角控制和数据实时分析与显示等四个子系统,完成对风洞试验的管理和数据测量与分析及显示。本文介绍了该系统的构成、主要功能和技术指标等。     

The International DORIS Service (IDS): Toward maturity

DORIS is one of the four space-geodetic techniques participating in the Global Geodetic Observing System (GGOS), particularly to maintain and disseminate the Terrestrial Reference Frame as determined by International Earth rotation and Reference frame Service (IERS). A few years ago, under the umbrella of the International Association of Geodesy, a DORIS International Service (IDS) was created in order to foster international cooperation and to provide new scientific products. This paper addresses the organizational aspects of the IDS and presents some recent DORIS scientific results. It is for the first time that, in preparation of the ITRF2008, seven Analysis Centers (AC’s) contributed to derive long-term time series of DORIS stations positions. These solutions were then combined into a homogeneous time series IDS-2 for which a precision of less than 10 mm was obtained. Orbit comparisons between the various AC’s showed an excellent agreement in the radial component, both for the SPOT satellites (e.g. 0.5–2.1 cm RMS for SPOT-2) and Envisat (0.9–2.1 cm RMS), using different software packages, models, corrections and analysis strategies. There is now a wide international participation within IDS that should lead to future improvements in DORIS analysis strategies and DORIS-derived geodetic products.     

DORIS processing at the European Space Operations Centre

This paper gives an overview of the DORIS related activities at the Navigation Support Office of the European Space Operations Centre. The DORIS activities were started in 2002 because of the launch of the Envisat satellite where ESOC is responsible for the validation of the Envisat Precise Orbits and a brief overview of the key Envisat activities at ESOC is given. Typical orbit comparison RMS values between the CNES POE (GDR-C) and the ESOC POD solution is 6.5, 18.8 and 23.1 mm in radial-, along- and cross-track direction. In the framework of the generation of the ITRF2008 ESOC participated in the reprocessing of all three space geodetic techniques; DORIS, SLR, and GPS. Here the main results of our DORIS reprocessing, in the framework of the International DORIS Service (IDS), are given. The WRMS of the weekly ESOC solution (esawd03) for the 2004–2009 period compared to the IDS-1 combined solution is of the order of 12 mm. Based on the long time series of homogeneously processed data a closer look is taken at the estimated solar radiation pressure parameters of the different satellites used in this DORIS analysis. The main aim being the stabilization of the Z-component of the geocentre estimates. We conclude that the ESOC participation to the IDS ITRF2008 contribution has been beneficial for both ESOC and the IDS. ESOC has profited significantly from the very open and direct communications and comparisons that took place within the IDS during the reprocessing campaign.     

基于混合编程技术的AOCC应用软件快速仿真平台

介绍基于混合编程技术的AOCC应用软件的快速仿真平台的整体框架设计以及具体实现．基于该方法构建的快速仿真平台，能够满足软件开发人员对基于8086汇编语言开发的AOCC应用软件开、闭环调试和测试的要求，对提高软件的开发效率和保证软件的质量有积极意义．