全空域数字多波束天线技术研究

针对航天领域全空域多目标管理使用需求,设计了一种基于富勒烯结构的赋型数字多波阵列天线,介绍了数字多波束信号收发处理工作原理及赋形阵列结构设计方案,研究了基于赋型阵列天线的波束滑动行走模式、多波束工作模式、波束增强模式,建立了赋形阵列天线数学仿真模型,对阵列天线波束增益一致性、波束宽度一致性、多波束方向图、波束增强性能进...     

相控阵雷达天线模型及仿真

阐述了相控阵天线仿真的重要性,指出了相控阵天线仿真的主要困难。提出了一种利用阵因子、方向性因子和旁瓣抑制因子分别解决仿真波束形状、天线增益、方向图旁瓣及其变化等3大问题,并进行综合建模和仿真,给出了综合后的仿真模型。该仿真模型保证了理论方面的精度,优化和减少了仿真计算步骤和计算量。利用该仿真模型,给出了宙斯盾系统的AN／SPY-1D雷达天线的仿真计算实例。     

光纤捷联惯组四点减振隔振模式分析研究

光纤陀螺捷联惯组减振设计中,经常采用平面四点减振隔振模式。本文结合减振系统对角振动固有频率的特殊要求,建立减振系统动力学模型,对角线振动固有频率比进行分析,通过改变惯组本体组件的质量分布提高角线振动固有频率比,可为光纤捷联惯组减振设计提供一定的指导。     

航天器太阳能电池阵驱动系统激扰因素辨识与扰动机理分析

建立了典型太阳能电池阵驱动系统(SADS)精细动力学模型，开展了扰动特性地面试验测试，讨论了产生扰动的必要条件，分析了直接激扰因素及其对应扰动的时频特点。结果表明：所建动力学模型分析结果与试验测试扰动数据吻合良好(误差<10%)；刚体转动角加速度和模态振动加速度不同时为零是引起驱动系统扰动的前提条件；细分驱动、电机磁场非线性、时变齿轮啮合参数等是驱动系统的主要内部激扰因素；扰动力矩一般均具有周期变化特点，扰动成分集中在激扰频率及其高倍频附近，扰动幅度随细分驱动步距、齿槽激扰幅度、电磁激扰幅度和啮合参数变化幅度的增大而提高。     

天籁射电阵的空间碎片探测性能分析

提出以曲靖非相干散射雷达作为一种可能的发射源与天籁射电阵组成一套双基地雷达空间碎片探测系统，对该系统的空间碎片探测性能进行计算与仿真分析，包括可探测目标雷达散射截面积(RCS)、天籁射电阵对空间目标与碎片探测时间、探测效率等。分析表明，该系统具有探测直径10 cm以下级空间小碎片的潜力，并在最后提出了一种基于该系统的交叉波束的确定方法及对空间碎片定位的方法。     

Performance verification of Lunar Regolith Penetrating Array Radar of Chang’E-5 mission

Lunar Regolith Penetrating Array Radar (LRPR) is one main payload of the Lander for Chinese Chang’E-5 (CE-5) mission. It is used to support the drilling and sampling device and to detect lunar regolith thickness and structure of the landing site. LRPR will only work in situ under static status, so the antenna array is employed. Since the antenna array is about 90?cm high from the ground, the layout is irregular, and the metal structure of the lander seriously interferes with LRPR, these factors make it very difficult to reconstruct the image of the drilling area, so the performance verification must be carried out. We propose a set of methods to process LRPR’s data and reconstruct image. The verification experiments demonstrate that these methods are suitable for LRPR, the thickness and structure of the lunar regolith from zero to two meters can be clearly mapped, the vertical resolution is a few centimeters, and the electromagnetic properties of the subsurface can be estimated. Therefore, the performance of LRPR meets the requirements, and LRPR can successfully support drilling and sampling.     

A star identification algorithm based on radial and dynamic cyclic features of star pattern

A full-sky star identification algorithm based on radial and dynamic cyclic patterns is presented with the aim of solving the “lost-in-space” problem. The dynamic cyclic pattern match is applied with a maximum cumulate comparison method to identify sensor-catalog pairings in initial match, which substantially eliminates the effects of the star position noise, magnitude noise, and false stars. After initial match pairings of stars are obtained, a chain part extension technique is employed to quickly search for the longest match chain as the final result. Experimental results indicate that the proposed algorithm is highly robust to star position noise, magnitude noise and false stars. In a series of simulations, the identification rate of the algorithm is 97.50% with 2.0 pixels star position noise, 96.90% with 0.4 Mv star magnitude noise and 95.30% with four false stars respectively. Moreover, the algorithm achieves an identification rate of 58.08% when only six stars are in the field of view.     

空间失稳目标线阵成像畸变分析与三维重建

针对线阵扫描型激光雷达在非合作失稳航天器三维模型重建过程中，存在运动目标线扫数据畸变且目标因失稳导致运动特性难以准确估计问题，提出一种带畸变自修正式三维重建方法，并进行畸变容忍度临界值分析。该方法基于测量系统的角精度与测距精度设计畸变容忍度临界值判定条件，首先根据实际工况与判定条件进行比对，判定是否对线扫数据进行初始畸变恢复；其次，对相邻扫描带畸变点云依次进行配准获取目标运动增量、解算目标瞬时运动参数；然后对目标运动参数进行自修正式处理，去除特征突变点干扰；同时依次恢复点云到初始几何位置，完成初始目标三维重建；最后，通过系统进一步迭代，位姿增量自收敛直至最终满足重建精度要求。仿真结果表明，该方法在缺失非合作目标先验信息的情况下，能够有效避免因线扫描导致的畸变问题，并较为快速地实现满足精度要求的目标三维重建，有较强的鲁棒性。     

Analytical and numerical approaches of a solar array thermal analysis in a low-earth orbit satellite

This paper researches the thermal analysis of a fixed-type solar array in a low-earth orbit satellite through both an analytical method with a simplified thermal model and a numerical method with a detailed thermal model.     

基于协议变换的图像采集系统设计

介绍了一个基于高速协议变换的实时图像采集系统,该系统实现了从IEEE1394协议到千兆以太网协议的实时变换,将基于IEEE 1394协议的数字相机发出的图像数据转发到以太网上.系统设计使用了SOPC(System On a Programmable Chip)技术,通过Avalon总线将Nios Ⅱ处理器,千兆网MAC核和自定义的1394芯片接口逻辑等IP组件连接在一起形成主要的硬件电路,结合系统软件设计实现了对高速图像数据的实时转发.系统达到了较好的性能,同时具有集成度高,结构简单和扩展性好的特点,展示了利用SOPC技术解决此类问题的优势.