Human and robotic repair of a solar array wing during ISS assembly mission 10A

With the installation of a new module and the relocation of three other modules, including multiple hand-offs from the station arm (SSRMS) to the shuttle arm (SRMS), International Space Station (ISS) assembly mission 10A/STS-120 was anticipated to be one of the most complicated ISS assembly missions ever attempted. The assembly operations became even more complex when a solar array wing (SAW) on the relocated Port-6 (P6) truss segment ripped while being extended. Repairing the torn SAW became the single most important objective for the remainder of STS-120, with future ISS assembly missions threatened by reduced power generation capacity if the SAW could not be repaired. Precise coordination between the space shuttle and ISS robotics teams led to an operational concept that combined the capabilities of the SRMS and SSRMS robotic systems in ways far beyond their original design capacities. Benefits of consistent standards for ISS robotic interfaces have been previously identified, but the advantages of having two such versatile and compatible robotic systems have never been quite so spectacular. This paper describes the role of robotics in the emergency SAW repair and highlights how versatility within space robotics systems can allow operations far beyond the intended design scenarios.     

机载无线电罗盘垂直天线电参数分析

从机载无线电罗盘垂直天线的实际应用出发，首先对垂直天线的电参数进行了简单的介绍和说明，然后依据等效电路理论对天线的各项参数的相互关系进行了详细的分析和推导，并列举了相关的试验方法和试验结果，进一步说明了垂直天线电性能是其相关电参数折衷的结果，最后对非独立垂直天线设计中的关键问题提出了相关建议。     

浅论无人机机载卫通天线尺寸与数字信号传输带宽关系

卫星通信是无人机中继通信的重要手段。本文对无人机卫星通信链路中飞机总体设计关注的机载卫通天线尺寸选择问题进行了较详细的计算、探讨。     

一种基于COTS的SAR分布式目标模拟方法

针对目前合成孔径雷达(SAR)目标模拟器通常只能模拟点目标，且通用化程度和实时性较低的问题，提出了一种基于商用现成品或技术(COTS)的SAR分布式目标模拟方法。利用NI PXI平台构建了一个基于电磁仿真的SAR分布式目标模拟器，由电磁仿真软件模拟获取目标散射特性，并通过高速网口输入硬件设备进行采样及卷积操作得到仿真SAR回波数字信号，经数模转换模块完成对SAR数字信号的调制并输出模拟回波，可以直接用于SAR系统的数据验证。模拟器采用数字式一体化硬件设备，由NI PXIe-5646R和PXIe-5840进行信号的接收和发送，PXIe-7902作为系统核心进行高速实时数据运算。系统以现场可编程门阵列(FPGA)为核心，通过LabVIEW RT (Real Time)和FPGA模块直接进行访问，能实时、高速地采集和处理数据。经过测试，该目标模拟器可以生成分布式目标的射频回波信号，环路验证结果证明了本文提出方法的有效性。另外，本文提出的方法适用于多种雷达信号的模拟，通过设置不同的信号体制或接收外部信号输入，可以实现灵活的SAR目标模拟。     

倾斜轨道卫星活动天线热控特点分析

对某低轨倾斜圆轨道卫星的外热流环境进行了分析。用蒙特卡罗法计算了卫星六个表面的外热流。研究了该轨道条件下舱外活动天线热控特点,提出了该类卫星活动天线的热控设计原则和初步方案。     

一种星载扫描天线的分析与设计

为适应卫星平台的需要,达到卫星天线能够实现角度扫描(正负5度)和机械扫描结构尽可能简单的要求,本文设计了一种三反射镜配置结构的角度扫描天线。首先利用几何光学法设计了赋形面,然后确定了在不同的扫描角度时,平面镜移动到的位置点。最后,利用高斯衍射波束分析方法(Diffraction Guassian Beam Analysis)进行了电性能的仿真验证。结果显示,在所需角度的扫描范围内,其具有较高的主面孔径利用效率和扫描机械结构简单的特点。在兼顾角度扫描和机械扫描结构简单的条件下,天线达到了所需的性能要求。     

High-efficiency aircraft antiskid brake control algorithm via runway condition identification based on an on-off valve array

The aircraft antiskid braking system is an important hydraulic system for preventing tire bursts and ensuring safe take-off and landing. The brake system adjusts the force applied on the brake discs by controlling the brake pressure. Traditional aircraft antiskid braking systems achieve antiskid performance by controlling the braking pressure with an electrohydraulic servo valve. Because the pilot stage of an electrohydraulic servo valve is easily blocked by carbonized hydraulic oil, the servo valve would become a dangerous weak point for aircraft safety. This paper proposes a new approach that uses an on-off valve array to replace the servo valve for pressure control. Based on this new pressure control component, an efficient antiskid control algorithm that can utilize this discontinuous feature is proposed. Furthermore, the algorithm has the ability to identify the runway circumstances. To overcome the discontinuity in the process of using an on-off valve array, the Filippov framework is introduced. The conditions of convergence of the system are also discussed. The results of the digital simulations and the hardware-in-the-loop (HIL) braking experiments are used to verify the efficiency and stability of the proposed control algorithm. The method also proves that the on-off valve array can replace the servo valve perfectly as a new type of antiskid braking pressure control component.     

3R-3URU可展单元机构及其在构架式可展天线中的应用

提出了一种空间单自由度(DOF)可展单元机构3R-3URU。首先,基于螺旋理论和修正的G-K公式分析了RURUR单闭环机构的自由度,建立了该机构中主动关节和被动关节速度之间的解析关系式,基于此关系式和3个RURUR机构共用首尾转动副的结构特点推导了3R-3URU单元机构的自由度,得到了3R-3URU机构具有1个自由度时各运动副的方向和位置满足的几何关系式。其次,将3R-3URU机构应用于3RR-3RRR四面体可展单元及其组成的球面构架式可展天线中,得到了具有收拢和调姿两种自由度的新型可展机构。最后,利用Adams软件对3R-3URU可展单元机构的自由度和其在四面体构架式可展天线中的应用进行了仿真验证。该3R-3URU可展单元机构具有单自由度、铰链种类少、结构简单等优点,可用于曲面构架式可展天线的支撑机构中,实现大折叠比。     

TDRSS中用户星的星-星天线跟踪规律深入研究

应用坐标转换，得到用户星的星-星天线基本跟踪规律。针对几种情况，并考虑地球的隔断影响和天线的自身限制，对星一星天线的方位角和俯仰角表达式进行了修正和补充。最后，针对某用户星，应用Matlab进行数学仿真。结果表明，根据得出的跟踪规律，可以使用户星的星一星天线最大范围地跟踪中继卫星。     

多通道固态调频发射系统

ＳＨＤ－Ａ型多通道固态调频发射机系统主要应用于航空通信系统－点对多点的声音、振动、测控等基带信号的发射与传输。此发射机采用了锁相频率合成器、单机多通道（１－４频道）发射和固态功放电路等技术，与目前国内的晶振固定发射频率调频发射机相比具有发射频率可随意调整、频稳度高、省去了多级倍频器和高阶滤波器，使电路简单可靠、调试方便、性能价格比高。是国内首先将此技术应用于小型固态调频发射机机型，此系统已通过航空