机身大迎角气动力的控制实验

本文研究了圆锥机身模型在迎角０°～９０°范围内的气动力特性。采用边条控制技术,可获得所需要的控制力与控制力矩。通过边条的对称或单侧布局和匹配边条不同的大小与安装位置,可以找到非对称力的最优控制方案。对对称布局,可以使对称现象得到控制,虽然侧力还微小产生,但侧力起始迎角却明显增大,且变化峰值可降低到原来的２５％;对单边条控制,可以获得理想平稳的控制力与控制力矩。     

电子移相方法的讨论

对精密测试中常用的几种移相方法进行了讨论,主要浅析小角度电路移相方法。     

基于PNFM-LFM复合调制的探测干扰共享波形设计

针对雷达-电子战一体化共享信号波形的设计需求,提出一种伪码噪声调频与线性调频复合调制的探测干扰共享波形。在伪码序列的伪随机性和规律性上,通过理论推导和仿真实验,分析并验证了该探测干扰共享波形具有良好的模糊函数以及线性可控的频谱特征,有效通带内干扰功率利用率平均可达38%;通过探测干扰共享信号的相关信号处理,本地接收机能够成功地对信噪比不低于-27 dB的回波信号进行检测,且改善因子可达30 dB。     

基于速度预测的导引律剩余时间估计

将分段线性逼近与迭代求解的思想扩展到对导弹的时变速度进行分段预测,给出了适用于反舰导弹速度时变情况的大前置角下比例导引律和偏置比例导引律的剩余时间估计算法。该算法在现有分段迭代算法的基础上,依据闭环形式的反舰导弹速度微分方程,分转弯平飞段和近似直线飞行段2种情况,对导弹未来速度的大小进行分段迭代预测并对剩余时间估计进行修正。算法中还给出了偏置比例导引律作用下近似直线飞行段剩余飞行航程的估计公式。仿真结果验证了本文算法的有效性。     

基于LDPC码的差分空时编码调制的联合优化

提出一种新的结合低密度校验码（LDPC）和差分空时调制（DSTM）的联合编码调制方案。该方案利用非正则LDPC码中不同度的信息节点具有不同纠错能力的特性,用一个分量码取代传统多级编码（MLC）方案中多个分量码,并通过特定的映射法则,使得系统可以同样逼近联合编码调制的信道容量,并具有更低的编译码复杂度。在分析和阐述了离散概率密度演化理论和多维线性空间极值问题的基础上,给出了适合于该方案的非正则LDPC码的搜索算法和搜索结果。同时仿真比较了不同星座和不同空时编码的选择对系统性能的影响。在准静态MIMO衰落信道下仿真结果表明．该方案能显著提高系统性能。     

基于光学测角数据的风云四号同步轨道卫星精密定轨

针对风云四号同步卫星的精密定轨和精度评估需求,首先利用地面光学测角数据对FY-4A卫星进行精密定轨,定轨后方位角和高度角的残差rms分别为0.25＂和0.45＂。与基于测距数据的轨道相比,位置精度在有测角数据的弧段内小于50m。进一步联合测角数据和测距数据对FY-4A卫星进行联合定轨,定轨后轨道重叠精度优于15m。利用联合定轨结果评估了基于测距数据的实时轨道产品精度,可以明显发现轨道精度随着测距数据的积累而逐步提高。     

脉冲展宽对深空激光通信的影响与补偿研究

深空激光通信系统下行链路的脉冲位置调制PPM（Pulse Position Modulation）信号在经过大气信道传输和单光子探测器接收时,将出现脉冲展宽效应,引起通信系统性能下降。分析了大气信道中的淡积云云层散射、大气湍流与气溶胶散射和单光子探测器的抖动特性所引起的脉冲展宽效应。在此基础上,仿真分析了淡积云云层物理厚度对不同PPM调制阶数下通信速率的影响,并研究了单光子探测器引起的脉冲展宽产生的抖动损失。为补偿脉冲展宽的影响,提出了一种基于时隙似然比解调的补偿方法,通过仿真验证了该方法能够有效降低深空PPM激光通信链路中脉冲展宽对通信误码率的影响。该研究对分析和提升深空PPM激光通信系统的链路性能具有一定的参考意义。     

基于理想解的模拟调制识别分析

利用排序待判决信号特征逼近各候选调制方式理想解的程度来实现调制方式识别,该方法不需要确定判决门限,运算量较小。以基本的模拟调制方式为对象,深入分析其识别性能,考察各权值系数对识别概率的影响,可以发现:一般各调制方式均只会被误判成其他某一种调制方式,且不同权值系数对判决结果的影响程度相差较大。因此,可以针对调制方式误判类型寻求新的特征参数,探求最优权值系数来进一步提升所提方法的识别性能。     

Digital fixed-frequency hysteresis current control of a BLDC motor applied for aerospace electrically powered actuators

In the conventional cascade control structure of aerospace electrically powered actuators, the current (or electromagnetic torque) loop plays a critical role in realizing a rapid response for a digitally controlled BrushLess Direct Current (BLDC) motor. Hysteresis Current Control (HCC) is an effective method in improving the performance of current control for a BLDC motor. Nevertheless, the varying modulating frequency in the traditional HCC causes severe problems on the safety of power devices and the electromagnetic compatibility design. A triangular carrier-based fixed-frequency HCC strategy is expanded by relaxing the constraints on the rising and descending rates of the winding current to advance the capability of HCC to realize fixed-frequency modulation in the steady state. Based on that, a new flexible-bound-size quasi-fixed-frequency HCC is proposed, and the range feasible to realize fixed-frequency modulation control can cover the entire running process in the steady state. Meanwhile, a corresponding digital control strategy is designed, and four digitalization rules are proposed to extend the capacity to achieve fixed-frequency modulation control to the unsteady working state, that is, a novel fixed-frequency modulation is realized. Simulation and experimental results prove the effectiveness of this improved fixed-frequency HCC strategy.     

An adaptive fast fixed-time guidance law with an impact angle constraint for intercepting maneuvering targets

Sliding mode guidance laws based on a conventional terminal sliding mode guarantees only finite-time convergence, which verifies that the settling time is required to be estimated by selecting appropriate initial launched conditions. However, rapid convergence to a desired impact angle within a uniform bounded finite time is important in most practical guidance applications. A uniformly finite-time/fixed-time convergent guidance law means that the convergence (settling) time is predefined independently on initial conditions, that is, a closed-loop convergence time can be estimated a priori by guidance parameters. In this paper, a novel adaptive fast fixed-time sliding mode guidance law to intercept maneuver targets at a desired impact angle from any initial heading angle, with no problems of singularity and chattering, is designed. The proposed guidance law achieves system stabilization within bounded settling time independent on initial conditions and achieves more rapid convergence than those of fixed-time stable control methods by accelerating the convergence rate when the system is close to the origin. The achieved acceleration-magnitude constraints are rigorously enforced, and the chattering-free property is guaranteed by adaptive switching gains. Extensive numerical simulations are presented to validate the efficiency and superiority of the proposed guidance law for different initial engagement geometries and impact angles.