一种基于S-粗集副集的目标编群方法

针对目标编群中的动态要求,提出了一种基于S-粗集副集的目标编群方法.以空间群为对象,用一个双向奇异集合来描述一个空间群,用特征函数来刻画目标迁入迁出群的程度,在此基础上给出了空间群中发现新目标的编群步骤.通过战场态势评估中的一个具体应用实例,证实了该方法的可行性和有效性.     

基于3层结构的新一代航管信息系统的设计与实现

采用3层结构理论对新一代航管信息系统进行了设计,并对系统研制中的关键技术,包括3层结构的物理实现、基于部件的应用开发、OLE、WindowsSocket、数据实时同步和访问控制等的实现方法进行了分析研究,最后给出了系统的应用实例。     

导弹自主编队综合作战效能评估方法

针对导弹自主编队协同制导与控制技术的综合作战效能评估问题,引入了协同制导与控制能力等级(CGCL)的概念,并结合层次分析法(AHP)和ADC效能评估模型建立了导弹自主编队综合作战效能的分析模型,分析了导弹自主编队典型作战想定下导弹编队成员的协同突防概率、交班成功率、命中概率和毁伤概率,分析过程充分考虑了导弹自主编队作战的能力和特点,并在搭建的导弹自主编队攻防对抗综合仿真验证系统上分析和验证了其有效性,为定量地分析导弹自主编队的综合作战效能提供了快速可靠的计算方法。     

MHD numerical simulations of proto-stellar jets

We will summarize in this paper the effects that the presence of the magnetic field can cause to proto-stellar jet dynamics, structure and emission line properties, and the differences between two- and three-dimensional numerical simulations will be emphasized. This revised version was published online in August 2006 with corrections to the Cover Date.     

浅谈舰载直升机的海上试飞

针对舰载直升机的特殊使用环境，分析了舰船运动情况对舰载直升机实施起飞、着舰和舰上机动飞行的影响，最后，探讨了MIL－F－83300等直升机规范对舰载直升机的各种使用规定及特殊的飞行品质要求。     

舰艇编队网络化反导作战指挥体系研究

网络中心作战条件下,传统作战指挥体系已经无法满足作战指挥需要,文章从指挥体制和指挥方式两方面探讨了适应舰艇编队网络中心作战模式的新型指挥体系;基于网络中心作战模式下舰艇编队作战指挥特点,分析了传统指挥体制和指挥方式的不足,提出一种由动态网络型指挥体制和动态分权式指挥方式构成的新指挥体系,并分析了其在指挥可靠性、整体性和时效性方面的优势。     

舰船机舱内测温系统准确性试验与分析

为研究舰船机舱内测温系统的工作情况,对两型舰船的热电阻测温系统和热电偶测温系统进行了试验。分别在机舱环境内和实验室环境内对相同的测温系统进行了测试,结果表明热电阻测温系统受机舱环境影响较小,能够准确地监测温度;热电偶测温系统受机舱环境影响较大,测量结果在高温段产生了失真,本文分析了热电偶测温系统产生偏差的原因。     

Formation tracking control for time-delayed multi-agent systems with second-order dynamics

In this paper, formation tracking control problems for second-order multi-agent systems (MASs) with time-varying delays are studied, specifically those where the position and velocity of followers are designed to form a time-varying formation while tracking those of the leader. A neigh-boring relative state information based formation tracking protocol with an unknown gain matrix and time-varying delays is presented. The formation tracking problems are then transformed into asymptotically stable problems. Based on the Lyapunov-Krasovskii functional approach, condi-tions sufficient for second-order MASs with time-varying delays to realize formation tracking are examined. An approach to obtain the unknown gain matrix is given and, since neighboring relative velocity information is difficult to measure in practical applications, a formation tracking protocol with time-varying delays using only neighboring relative position information is introduced. The proposed results can be used on target enclosing problems for MASs with second-order dynamics and time-varying delays. An application for target enclosing by multiple unmanned aerial vehicles (UAVs) is given to demonstrate the feasibility of theoretical results.     

DELAMINATION FORMATION AND DELAMINATION PROPAGATION OF COMPOSITE LAMINATES UNDER COMPRESSIVE FATIGUE LOADING

Fatigue tests of the smooth composite laminates and the notched composite laminates under compressive cyclic loading have been carried out. The damage mechanism is discussed and analyzed. Damage evolution is monitored using stiffness decay. From these tests, it is found that the initial delamination occurs at the free boundary of smooth specimens, or the notch boundary of notched specimens, subjected to the compression-compression cyclic load. A point of view in relation to two-phases of compression fatigue delamination of composites is proposed, namely, compression-compression delamination consists of the delamination formation phase and the delamination propagation, and there is a “damage transition point” to separate this two-phases. Furthermore, an empirical modulus degradation formula and its parameters fitting method are presented. According to the test data handling results, it is shown that this formula is univocal and can fit the test data conveniently. In addition, two kinds of new anti-buckling devices are designed for these tests. At last, the E-N curves, the D-N curves and the S-N curve of the smooth carbon fiber reinforced composite laminates of T300/648C are determined to predict the fatigue life of the notched composite laminate. And the E-N curve of the notched specimens at the given load ratio R=10 and minimum load P_min=-0.45　kN is also measured to verify the estimated result of fatigue life.     

An LMI-based decoupling control for electromagnetic formation flight

Electromagnetic formation flight(EMFF) leverages electromagnetic force to control the relative position of satellites. EMFF offers a promising alternative to traditional propellant-based spacecraft flight formation. This novel strategy is very attractive since it does not consume fuel. Due to the highly coupled nonlinearity of electromagnetic force, it is difficult to individually design a controller for one satellite without considering others, which poses challenges to communications.This paper is devoted to decoupling control of EMFF, including regulations, constraints and controller design. A learning-based adaptive sliding mode decoupling controller is analyzed to illustrate the problem of existing results, and input rate saturation is introduced to guarantee the validity of frequency division technique. Through transformation, the imposed input rate saturation is converted to state and input constraints. A linear matrix inequalities(LMI)-based robust optimal control method can then be used and improved to solve the transformed problem. Simulation results are presented to demonstrate the effectiveness of the proposed decoupling control.