砂布轮柔性抛光力的建模与参数优化

砂布轮柔性较大可以实现航空发动机叶片微面切触自适应抛光,提高叶片表面完整性和力学性能。抛光力是影响抛光表面完整性的关键参数,通过单因素试验分析确定了砂布轮抛光力的影响参数及其影响规律,通过正交试验和极差法确定了影响抛光力的主要参数是砂布轮的压缩量和转速;利用二元二次回归正交试验得出了抛光力的预测模型,利用该模型分析了抛光力预测误差变化趋势,明确了不同转速下抛光力主要影响参数的稳定域;整体叶盘的抛光试验表明：通过合理控制抛光力,可以实现表面粗糙度小于0.4 μm的抛光效果,且效率比人工提高20%。     

Aerodynamic optimization of rotor airfoil based on multi-layer hierarchical constraint method

Rotor airfoil design is investigated in this paper. There are many difficulties for this high-dimensional multi-objective problem when traditional multi-objective optimization methods are used. Therefore, a multi-layer hierarchical constraint method is proposed by coupling principal component analysis (PCA) dimensionality reduction and e-constraint method to translate the orig-inal high-dimensional problem into a bi-objective problem. This paper selects the main design objectives by conducting PCA to the preliminary solution of original problem with consideration of the priority of design objectives. According to the e-constraint method, the design model is estab-lished by treating the two top-ranking design goals as objective and others as variable constraints. A series of bi-objective Pareto curves will be obtained by changing the variable constraints, and the favorable solution can be obtained by analyzing Pareto curve spectrum. This method is applied to the rotor airfoil design and makes great improvement in aerodynamic performance. It is shown that the method is convenient and efficient, beyond which, it facilitates decision-making of the high-dimensional multi-objective engineering problem.     

一种鲁棒的概率核主成分分析模型

大数据时代面临的数据维数越来越高,对数据降维处理越发显得重要。经典的主成分分析模型已被证明是一种有效的数据降维方法。但它在处理非线性、存在噪声和异常点的数据时存在效果较差的问题。对此,文章提出了一种鲁棒概率核主成分分析模型。该模型将核方法与基于高斯隐变量模型的极大似然框架相结合,用多元 t分布作为先验分布,以同时解决主成分分析在这 3个方面的弊端。提出混合鲁棒概率核主成分分析模型,使其可直接用于对混合的非线性数据进行降维和聚类分析。在不同数据集上进行的实验结果表明,与标准的混合概率核主成分分析模型相比,文中模型在数据聚类方面有更高的准确率。     

基于操纵面故障影响估计的安全飞行轨迹优化

操纵面故障将改变飞机受到的气动力和力矩,降低机动性能和控制能力,基于传统质点模型的航迹规划方法难以解决此类飞机安全飞行轨迹优化问题.因此,引入由故障引起的侧滑和侧力,估计故障后气动力系数,建立故障飞机模型;针对故障飞机控制和机动能力下降的问题,在原故障模型的基础上引入控制量变化率,构建轨迹优化对象模型,并将控制量变化率最小作为优化指标;采用高斯伪谱法优化计算安全飞行轨迹.仿真实验以副翼和方向舵故障为例进行设计,结果满足运动方程及各控制量、状态量约束,并能实现平稳飞行.     

Optimization of communication network topology for navigation sharing among distributed satellites

Navigation sharing among distributed satellites is quite important for coordinated motion and collision avoidance. This paper proposes optimization methods of the communication network topology to achieve navigation sharing. The whole communication network constructing by inter-satellite links are considered as a topology graph. The aim of this paper is to find the communication network topology with minimum communication connections’ number (MCCN) in different conditions. It has found that the communication capacity and the number of channels are two key parameters affecting the results. The model of MCCN topology for navigation sharing is established and corresponding method is designed. Two main scenarios, viz., homogeneous case and heterogeneous case, are considered. For the homogeneous case where each member has the same communication capacity, it designs a construction method (Algorithm 1) to find the MCCN topology. For the heterogeneous case, it introduces a modified genetic algorithm (Algorithm 2) to find the MCCN topology. When considering the fact that the number of channels is limited, the Algorithm 2 is further modified by adding a penalized term in the fitness function. The effectiveness of these algorithms is all proved in theoretical. Three examples are further tested to illustrate the methods developed in this paper.     

Powered-descent trajectory optimization scheme for Mars landing

This paper presents a trajectory optimization scheme for powered-descent phase of Mars landing with considerations of disturbance. Firstly, θ–D$\theta ''–''D$ method is applied to design a suboptimal control law with descent model in the absence of disturbance. Secondly, disturbance is estimated by disturbance observer, and the disturbance estimation is as feedforward compensation. Then, semi-global stability analysis of the composite controller consisting of the nonlinear suboptimal controller and the disturbance feedforward compensation is proposed. Finally, to verify the effectiveness of proposed control scheme, an application including relevant simulations on a Mars landing mission is demonstrated.     

基于动态RCS的无人机航迹实时规划

传统的无人机航迹规划主要采用仅考虑无人机与雷达距离的简化雷达威胁模型,未充分考虑无人机雷达散射截面RCS(Radar Cross-Section)随自身姿态角改变而产生的动态变化.据此,提出了无人机周向动态RCS模型,并建立了综合考虑无人机动态RCS与雷达距离的探测概率模型,利用遗传算法进行了基于动态RCS的航迹实时规划,计算结果与传统航迹规划结果进行了对比.仿真结果表明该模型的可行性和有效性,能充分利用无人机自身的优势规避威胁,满足无人机的航迹实时规划的要求.      

月球精确软着陆最优标称轨迹在轨制导方法

为实现在月球表面期望的着陆点进行精确软着陆（PPL）,且满足燃耗最优性要求,基于提出的LIDAR目标点在轨自主选定的月球精确软着陆方案,对月球PPL最优标称轨迹在轨快速规划制导方法进行研究。首先针对月球PPL三维球体非线性轨道动力学模型,采用Legendre Gauss Lobatto伪光谱方法将轨迹优化的最优控制问题转化为非线性规划问题（NLP）,再利用SQP优化算法求解月球PPL最优标称轨迹,最后通过遗传算法对优化结果进行验证,并提出应用遗传算法提供SQP在轨规划初值数据库的方案。仿真结果表明了最优标称轨迹在轨规划方法的快速性和有效性。     

具有广泛适用性的AOS虚拟信道调度算法

针对现有的基于虚拟信道紧迫度的动态调度算法的不足,提出了一种新的高级在轨系统虚拟信道动态调度算法。该算法首先估算虚拟信道的紧迫度和数据帧的紧迫度,然后用加权系数将二者结合起来构造成一个全新的虚拟信道传送紧迫度函数,再根据该函数的值进行判决调度。对于高级在轨系统中不同速率、不同性质、不同类型的星上数据源,该算法均可通过选择合适的加权系数灵活地分配传输时隙,保证各用户合理、动态地占用物理信道,满足对数据的传输时延要求,因此具有广泛的适用性。理论分析和仿真结果表明,本文提出的算法比基于虚拟信道紧迫度的动态调度算法具有更好的性能     

费用约束下含应力优化的CSADT设计

恒定应力加速退化试验(CSADT,Constant Stress Accelerated Degradation Testing)方案中需要确定的变量有应力水平、各应力下样本量、监测间隔和各应力下监测次数.如何对CSADT的应力水平进行优化目前很少有人探讨.针对这一问题提出一种在费用约束下将上述4个变量进行综合优化的方法.首先用随机过程描述CSADT下产品的性能退化过程,然后以产品在使用条件下p分位寿命可靠度的渐近方差最小为目标,以试验费用不超过预算为约束条件,给出CSADT的4个优化变量,并给出应用该优化方法的仿真算例.最后,优化方案对模型参数偏差的敏感性分析表明,在一定偏差范围内优化结果具有良好的稳健性.