九寨机场航务代理工作浅谈

在分析了九寨机场的气象特点以及环境因素对航空器造成的影响的基础上,就如何做好九寨机场的航务代理工作提出了合理建议和措施,这对提高航班正常率非常重要.     

机场道面聚丙烯腈纤维混凝土性能分析

对素混凝土和聚丙烯腈纤维混凝土的抗疲劳性能、弯曲韧性和抗冲击性能进行了试验研究,并分析了聚丙烯腈纤维对机场道面分类值PCV的改善效果。结果表明,掺入聚丙烯腈纤维后,混凝土各项性能指标显著提高,道面PCV值增加8.4％,大大提高了机场道面的承载能力。     

民用机场停机位优化配置

停机位配置指为到港或离港航班指定适宜的登机口,确保航班正点。航班停机位的高效、合理安排是机场地面作业中的一项核心任务。本文在系统分析国内繁忙机场停机位配置情况的基础上,提出以旅客登转机时间(旅客满意度)、机型与停机位类型匹配(机场效益)为优化目标,同时考虑航班类型(国内短途、国际长途)、航班数量与密度(忙时、闲时)、停机时间的停机位配置的数学模型,并设计求解模型的禁忌搜索(TS)算法。数值仿真证明了模型和算法的有效性。     

不规则小行星附着可达区生成方法

针对不规则小行星表面附着任务需求,提出了一种基于动态邻域搜索的可达区生成方法。首先,建立了可达区数学模型,并采用质心距映射函数对非定点附着的终端位置约束进行了处理。在此基础上,将可达区的优化问题转化为附着基准点计算、边界起始点计算和边界点搜索三个子问题。针对附着基准点与边界起始点,分别通过最小燃耗轨迹优化与极限燃耗轨迹优化求解;针对边界点,设计了导向式动态邻域搜索方法,将复杂的非定点着陆优化问题简化为定点着陆燃耗优化与边界插值。最后,以小行星433 Eros为对象,对所提出的可达区生成方法进行了仿真。结果表明,该方法能够生成不规则小行星表面的可达区,具有较高的搜索求解效率,并适用于不同的初始位置和燃耗条件。     

Energy input for explosive events in the transition zone

It is suggested that the energy input for explosive events in the transition zone comes from precipitating ions, typically of energies of a few×10² keV/nucleon, accelerated in the high corona. The energetics of the process are discussed, together with implications for coronal heating.     

Influence of deformation zone length on bending radius of SS304 tubes with small diameters manufactured via free bending-based active motion

In three and six-axis free-bending equipment, the deformation zone length(A) is a fixed mechanical structure parameter modified when the relevant structure is redesigned and manufactured. In this study, a six degree of freedom(6-DOF) parallel mechanism was used as the control mechanism of the bending die, and a new method of changing the deformation zone length(A)was proposed. Firstly, an idealized geometric model of free bending-based active motion was established. Then, the influence of the de...     

航空复合材料纸蜂窝夹芯结构热成型开裂研究

飞机复合材料芳纶纸蜂窝夹芯部件在热压罐成型时处于热-力耦合工况。本文关注热成型过程中可能出现的蜂窝开裂现象,通过试验获得了蜂窝芯的拉、压、剪性能参数和芳纶纸的热性能参数,同时结合有限元分析手段和反演方法,对整体蜂窝夹芯部件的热-力顺序耦合和局部芯子抽真空导致的蜂窝胞元间压强差进行数值模拟。结果表明：成型过程中的热应力不会导致蜂窝胞元间胶层开裂,局部憋气的压差可能导致蜂窝开裂;胶层部分破坏与胶层完全破坏所需的胞元间压强差的差值与胶层初始法向断裂应力正相关;胶层完全破坏所需的胞元间压强差随着受载胞元数量的增多而减小。     

RECAT间隔标准的差异性对比与计算分析

尾流是影响机场容量的重要因素之一,在保证安全前提下缩减尾流间隔能增加机场繁忙时刻航空器进离场架次,进而提高机场容量.美国和欧洲提出尾流标准重新分类(RECAT)概念,并在一些机场试运行,取得良好效果.基于国内某机场一周内航空器起降机型架次,将其重新分类,对比在现行ICAO和RECAT标准下的加权尾流间隔,证明在RECAT标准下尾流间隔将会缩减.通过改变不同航空器机型占比,分析机场容量变化,得出机场容量随航空器占比变化明显,对空管安全运行和机场及跑道运行效率提高具有实际参考价值.     

论区域经济联动发展的系统构架

区域经济联动发展是经济全球化与区域经济一体化背景下的大势所趋,是立足全球发展、顺应世界经济潮流的必然选择.通过不同角度分析了区域经济联动发展的意义与内涵,概括了区域经济联动发展的主要特征,并就如何促进区域经济联动发展提出了策略和主张.     

Comparison of model and experimental ionospheric parameters at high latitudes

Modern use and study of the auroral region needs to attract a wider class of models for describing conditions of radio wave propagation in the ionosphere. In this paper the possibilities of the International Reference Ionosphere model, well-proven and widespread in the mid-latitudes, are investigated in the high latitude zone. Model and measured values of the critical frequency foF2 for two mid-latitude stations (Juliusruh and Goosebay) and four high-latitude ones (Loparskaya, Sodankyla, Sondrestrom, Thule) are compared. Deviations of medians, variations from day to day and solar activity trends seemed to be similar for both areas. This similarity is irrespective of the RZ12 index. Special attention is paid to the TEC parameter and its determination using 6 versions of models, a new version of the model IRI2010 (IRI-Plas) among them. It is shown that the IRI-Plas model significantly improves the definition of TEC in contrast to the versions of IRI2007 and the new model NeQuick. The use of the median of the experimental equivalent slab thickness, together with the current values of the TEC, increases by a factor of two the agreement between calculated and measured foF2 values as compared with the variations from day to day. This allows foF2 to be defined in near-real time.