Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

飞机大攻角非定常气动力建模与辨识

采用一阶微分方程描述由非线性非定常效应引起的气动力增量 ,从而建立了一种新的飞机大攻角非定常气动力数学模型。研究了模型在缓变运动下的线化形式和动导数表达式。讨论了模型参数的辨识问题。算例证实了所建立的气动力数学模型的正确性和所述模型参数辨识方法的有效性     

混杂复合材料层合板抗冲击性能研究

为了探究复合材料层合板在实际应用中因承受冲击载荷而造成的结构安全问题,本研究采用实验和仿真相结合的方法,首先探究冲头形状对复合材料层合板损伤机理的影响,然后结合不同冲击能进一步揭示层合板的承载力和能量吸收变化规律。结果表明,相同冲击能下,层合板的损伤范围和承载力随着圆锥头、半球头、平头依次增加;相应的层合板的临界穿透能量随着圆锥头、半球头、平头依次增大;冲头形状和冲击能对层合板的吸能能力有较大的影响。     

航线维修中的NFF件处理对策

对未发现故障(NFF)件产生的原因进行了分析,结合航线维修工作特点,编制了NFF件处理逻辑图,提供了系统的NFF件解决方案;在对NFF件的可靠性管理过程中引入闭环控制方法,从航线维修和部件修理两个方面入手,给出了减少NFF件的方法,对消除由NFF件造成的飞机运行不良影响、降低维修费用、提高部件修理质量有积极作用.     

Magnetospheric disturbances associated with the 13 December 2006 solar flare and their ionospheric effects over North-East Asia

We present an observational study of magnetospheric and ionospheric disturbances during the December 2006 intense magnetic storm associated with the 4В/Х3.4 class solar flare. To perform the study we utilize the ground data from North–East Asian ionospheric and magnetic observatories (60–72°N, 88–152°E) and in situ measurements from LANL, GOES, Geotail and ACE satellites. The comparative analysis of ionospheric, magnetospheric and heliospheric disturbances shows that the interaction of the magnetosphere with heavily compressed solar wind and interplanetary magnetic field caused the initial phase of the magnetic storm. It was accompanied by the intense sporadic E and F2 layers and the total black-out in the nocturnal subauroral ionosphere. During the storm main phase, LANL-97A, LANL 1994_084, LANL 1989-046 and GOES_11 satellites registered a compression of the dayside magnetosphere up to their orbits. In the morning–noon sector the compression was accompanied by an absence of reflections from ionosphere over subauroral ionospheric station Zhigansk (66.8°N, 123.3°E), and a drastic decrease in the F2 layer critical frequency (foF2) up to 54% of the quite one over subauroral Yakutsk station (62°N, 129.7°E). At the end of the main phase, these stations registered a sharp foF2 increase in the afternoon sector. At Yakutsk the peak foF2 was 1.9 time higher than the undisturbed one. The mentioned ionospheric disturbances occurred simultaneously with changes in the temperature, density and temperature anisotropy of particles at geosynchronous orbit, registered by the LANL-97A satellite nearby the meridian of ionospheric and magnetic measurements. The whole complex of disturbances may be caused by radial displacement of the main magnetospheric domains (magnetopause, cusp/cleft, plasma sheet) with respect to the observation points, caused by changes in the solar wind dynamic pressure, the field of magnetospheric convection, and rotation of the Earth.     

Variable Structure Control of Catastrophic Course in Airdropping Heavy Cargo

The mathematical model of a transport aircraft would be subjected to a sudden change when heavy cargo is dropped off in airdropping, which exerts serious influences upon the safety of the aircraft. A variable structure controller is specially designed for handling the airdrop process. The nonlinear system is linearized by input-output feedback linearization using differential geometry theories. On this basis, an inner loop system for velocity and attitude tracking control is designed by using the exponentially approaching rule of the variable structure theory. The whole flight control system is integrated with the outer loop flight altitude control. Digital simulation evidences the applicability of the system to potentially catastrophic course in airdropping heavy cargo and provides robustness against system parameter perturbation.     

浅析高职英语分层次教学——长沙航空职业技术学院英语教学改革个案分析

结合高职高专院校英语教学现状,以长沙航空职业技术学院为例,提出“分层次教学”是一条高职英语教学改革的特色之路,并对高职高专院校开展分层式教学进行了探讨。     

大迎角试验数据精度及影响因素分析

着重分析了粗糙带、偏航角β、模型抖动以及滤波频率、采样时间和样本长度等因素对于大迎角试验数据精度的影响.结果认为:常规试验采用的滤波频率会导致关键气动信息的丢失,滤波频率的选取尤为重要;弯刀系统的横向刚度是影响大迎角数据精度的一个重要因素,试验中如何降低其横向刚度的影响是一难点.     

CU-1型钇基重稀土对Be-Cu合金性能影响的研究

研究了CU-1型钇基重稀土对Be-Cu合金性能的影响。结果表明:Be-Cu合金经过微量CU-1型稀土的微合金化处理后,其显微硬度、耐磨性和耐腐蚀性均有不同程度的提高,热膨胀系数有所下降;随着稀土加入量的增加,Be-Cu合金的显微硬度逐渐提高,磨损量和平均腐蚀速率逐渐降低,热膨胀系数先减小后增大。     

毫微秒脉冲雷达高度表的超低空静态模拟测高及其结果分析

本文主要介绍一种新型脉冲雷达高度表,装于CK1E超低空靶机模型上静态测高的试验方法和结果。结果分析表明该高度表适用于CK1E靶机的飞行控制系统,作为高度传感器,在超低空进行精确而稳定的测高成功。