基于正反问题耦合的压气机特性快速预测方法

提出一种基于正反问题耦合的压气机特性快速预测方法,根据压气机一维设计理论,通过对满足流量及压比设计指标的反问题求解快速得出压气机的气动布局方案,在此基础上结合非设计点损失和落后角模型通过正问题求解得出全工况压气机特性,再根据预测特性与目标的偏差调整气动布局方案,以此通过对正反问题的耦合求解实现对压气机特性的合理快速预测...     

运输机空投起始点研究

根据货物空投着陆点及空投轨迹,计算出运输机空投起始点,并将所计算的空投起始点信息提供给航电系统,引导运输机执行空投点航线。空投起始点的研究对运输机实现空投功能及提高空投精度具有重要的理论意义和现实意义。     

基于区间分析法的防冰引气管路系统故障树分析

针对防冰引气管路系统故障树分析中底事件故障率和概率统计信息的不确定性,基于区间分析法开展某型飞机防冰引气管路系统可靠性评估。根据防冰引气管路系统原理和故障发生机理建立系统的故障树,并采用区间概率来描述底事件失效概率的不确定性。计算结果表明:区间分析法在分析防冰引气管路系统故障树时只需要底事件失效概率的取值范围,而不要求其详细的概率统计信息,因而其适用面更广,更适合实际工程问题的需要。     

Computational aerodynamic analysis on perimeter reinforced （PR）-compliant wing

Abstract Implementing the morphing technique on a micro air vehicle （MAV） wing is a very chal- lenging task, due to the MAWs wing size limitation and the complex morphing mechanism. As a result, understanding aerodynamic characteristics and flow configurations, subject to wing structure deformation of a morphing wing MAV has remained obstructed. Thus, this paper presents the investigation of structural deformation, aerodynamics performance and flow formation on a pro- posed twist morphing MAV wing design named perimeter reinforced （PR）-compliant wing. The numerical simulation of two-way fluid structure interaction （FSI） investigation consist of a quasi- static aeroelastic structural analysis coupled with 3D incompressible Reynolds-averaged Navier- Stokes and shear-stress-transport （RANS-SST） solver utilized throughout this study. Verification of numerical method on a rigid rectangular wing achieves a good correlation with available exper- imental results. A comparative aeroelastic study between PR-compliant to PR and rigid wing per- formance is organized to elucidate the morphing wing performances. Structural deformation results show that PR-compliant wing is able to alter the wing＇s geometric twist characteristic, which has directly influenced both the overall aerodynamic performance and flow structure behavior. Despite the superior lift performance result, PR-compliant wing also suffers from massive drag penalty, which has consequently affected the wing efficiency in general. Based on vortices investigation, the results reveal the connection between these aerodynamic performances with vortices formation on PR-comoliant wing.     

基于协同多任务分配的飞机排班模型与算法

航空公司的航班运行一直存在安全与成本的矛盾:既要严格按规定完成飞机例行检修,优先保障运行安全,又要尽可能提高飞机日利用率,以降低运行成本.为此,研究基于协同多任务分配的飞机排班问题.分析例行检修约束,建立最优化飞机日利用率的数学模型,运用分枝定价算法进行求解.分枝定价算法引入检修节点和虚拟飞机节点的定义,将分配的航班飞...     

六转子微型飞行器及其低雷诺数下的旋翼气动性能仿真

提出了一种新结构的六转子无人飞行器的概念,该飞行器可以在空间任意方向飞行,甚至可以在地面上滚动前进。分析了其可能的三种构型并给出了各自的运动方程,给出了三轴解耦时该飞行器的配置方式及转子空间位置。由于该飞行器具有小尺寸外形、低重量和飞行速度慢的特点,根据转子速度、弦长和飞行模态,计算得该飞行器的雷诺数变化范围为1×104到12.8×104。以选用的Eppler 387翼型作为分析对象,采用正投影混合网格方法对其在低雷诺数下的气动性能进行研究,得到了雷诺数分别为1×104,2×104,3×104和6×104下对应不同迎角的升力系数、阻力系数和升阻比,并对雷诺数为6×104下的升力系数仿真结果同试验结果进行了对比,二者具有较好的一致性。制作了六转子微型飞行器样机,实现了垂直起降及慢速前飞。     

缝式处理机匣轴向位置对压气机特性影响的机理

对轴向倾斜缝处理机匣轴向位置的改变如何影响轴流压气机性能进行了研究.试验与数值结果均表明三个轴向位置的处理机匣均扩宽压气机的稳定工作范围,轴向位置不变时扩稳效果最好,轴向位置后移时效果最差.同时轴向位置前移或后移使压气机等熵效率损害程度降低.通过详细地分析压气机内部流场表明:处理机匣轴向位置后移使叶顶机匣约1/3的轴向...     

Topological Studies of Three-dimensional Flows in a High Pressure Compressor Stator Blade Row without and with Boundary Layer Aspiration

This paper presents a numerical study of the flow topologies of three-dimensional (3D) flows in a high pressure compressor stator blade row without and with boundary layer aspiration on the hub wall. The stator blade is representative of the first stage operating under transonic inlet conditions and the blade design encourages development of highly complex 3D flows. The blade has a small tip clearance. The computational fluid dynamics (CFD) studies show progressive increase of hub corner stall with the increase in incidence. Aspiration is implemented on the hub wall via a slot in the corner between the hub wall and the suction surface. The CFD studies show aspiration to be sensitive to the suction flow rate; lower rate leads to very complex flow structures and increased level of losses whereas higher rate renders aspiration effective for control of hub corner separation. The flow topologies are studied by trace of skin friction lines on the walls. The nature of flow can be explained by the topological rules of closed separation. Furthermore, a deeper analysis is done for a particular case with advanced criterion to test the non-degeneracy of critical points in the flow field.     

仪表飞行程序运行安全性评价模型与仿真分析

为对飞行程序设计与运行的安全性进行定量分析,需建立评价指标测度模型。从超障安全和飞行冲突风险水平两方面分析了影响飞行程序安全性的主要因素,提出了飞行程序运行的近地风险模型、飞行程序运行交通流内部以及不同飞行程序运行交通流之间的冲突强度和累计风险模型。以实际的进离场飞行程序为例开展仿真实验,提出了安全指标量化分析的方法,揭示了飞行程序构型、布局等影响安全性的规律。实验结果表明,该模型能客观地反映飞行程序安全性且有计算简便的特点。     

非典事件对民航客运的干预影响分析

随着人们消费能力的增强和航空业市场化的深入,中国民航客运量发生了爆炸性的增长,但由于民航面对的是高端客运市场,行业具有高风险的特征,容易受到外部冲击的影响。通过时间序列模型的干预分析考察了非典事件对民航客运量的影响。从分析结果看,非典外部冲击对民航客运量的负面作用很快被市场反弹和相关优惠政策抚平,并对客运量的增长带来了持续的正影响。这一结果说明高速发展阶段的民航对抗非典这类外部冲击的能力较强,直接和滞后的减税政策并非最优的政策选择。