Suggestion for aircraft flying qualities requirements of a short-range air combat mission

Owing to the lack of a direct link with the operations in short-range air combat,conventional aircraft flying qualities criteria are inappropriate to guide the design of a task-tailored flight control law.By applying the mission-oriented flying qualities evaluation approach,various aircraft with different control law parameters are evaluated on a ground-based simulator.This paper compares the evaluation results with several conventional flying qualities criteria,and discusses the appropriate parameter combination to reflect the flying qualities requirements of short-range air combat,The comparison and analysis show that a short-range air combat mission requires a higher minimum short period mode natural frequency and a smaller maximum roll mode time constant,and allows a lower minimum pitch attitude bandwidth and a higher maximum short period mode damp ratio than those of conventional flying qualities criteria.Furthermore,a combination of the pitch attitude bandwidth,the pitch attitude magnitude at the bandwidth frequency,and the pitch attitude transfer function gain can define the flying qualities requirements of short-range air com bat.The new metric can successfully predict the flying quality levels of aircraft in a short-range air combat mission.     

Aerodynamic performance enhancement for flapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance. In this paper, a novel active flow control technology called Co-Flow Jet (CFJ) is applied to flapping airfoils. The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes (URANS) simulation with Spalart-Allmaras (SA) turbulence model. Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case. Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion, with Reynolds number 70,000 and reduced frequency 0.2. As a result, CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when C_μ is greater than 0.04, which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer. Besides, typical kinematic and geometric parameters, including the reduced frequency and the positions of the suction and injection slot, are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil. And a variable C_μ jet control strategy is proposed to further improve effective propulsive efficiency. Compared with using constant C_μ, an increase of effective propulsive efficiency by 22.6% has been achieved by using prescribed variable C_μ for NACA6415-based CFJ airfoil at frequency 0.2. This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles (FMAV).     

波音737NG飞机大气数据探头自动加温功能测试的替代方法研究

根据波音AMM手册要求,在更换波音737NG飞机上的大气数据系统传感器后,需通过试车测试其自动加温功能。本文研究了波音737NG飞机大气数据系统探头自动加温的工作原理,并提出避免试车的解决方案。     

Three-dimensional numerical analysis on combustion performance and flow of hybrid rocket motor with multi-segmented grain

This paper presents the combustion characteristics in hybrid rocket motors with multi-segmented grain through three-dimensional numerical simulations. Multi-segmented grain is composed of several thin grains with two or more ports. The numerical model consists of Navier-Stokes equations with turbulence, solid fuel pyrolysis, chemical reactions, a fluid–solid coupling model and a regression rate model. The simulations adopt 90% Hydrogen Peroxide (HP) and PolyEthylene (PE) as the propellant combination. The effects of the rotation, port number, fuel grain segment number and mid-chamber length on the flow field and combustion performances are analyzed. The results indicate that the multi-segmented grain configuration can strengthen the flow field, and the regression rate and combustion efficiency are enhanced. Take the cases with two grain segments and three ports for example, the regression rate is increased by 32.4%−45.1% and the combustion efficiency increases by 6%−8.6% in different rotation angles.     

中国民航旅客量季节性问题研究

中国民航旅客量的季节性波动是经济学研究的重要命题。选取中国民航旅客量时间序列数据作为分析对象，采用年度季节强度指数（R）与月季指数（Zt），揭示中国民航旅客量的年度季节集中性与月度季节变化规律。 R值整体上呈现逐年递增的趋势，指标随季节变化明显，且按一定规律分布。 Zt 值指示4月、7月、8月、9月、10月为旺季，其余月份为淡季。民航旅客量淡旺季与游客出游行为、节假日长短、气候等因素有直接联系。研究结论为解决中国民航旅客量的淡旺季问题提供基础数据，也为调整航空公司在淡旺季时的人员、航班及其他工作安排，为缓解航空客流量供需不平衡的矛盾提供决策参考。     

Flow mechanism between purge flow and mainstream in different turbine rim seal configurations

The rim seal is used to prevent mainstream ingestion to the gap between the vane of a turbine and its blade. In this article, the dolphin lip with a hook configuration and a large seal cavity with hook structures are designed based on the high-pressure turbine datum single shark lip rim seal configuration. The sealing effect and parameters of the flow field are measured by an experiment method and a numerical simulation is used to explain the mechanism. For three configurations, the effect of the leakage slot vortex on the efficiency of the seal and the influence of leakage vortex, generated by the interaction between purge flow and mainstream flow, are discussed in depth. The result shows that the reverse vortex formed by the dolphin lip rim seal with hook structure will increase the sealing efficiency. The seal configuration with a large cavity improves sealing efficiency to a greater extent than the datum structure. At different purge flow rates and with unequal seal structures, the purge flow produces three types of leakage vortices in the passage. Besides, the seal configuration with dolphin lip produces a Kelvin-Helmholtz instability at the interface of the purge and the mainstream flows at a low purge flow rate to induce new leakage vortex branches in the passage of the blade.     

防烟供氧面罩漏气系数试验系统的设计及应用

介绍了防烟供氧面罩漏气系数试验系统的设计与试验原理。该系统采用单元分体式结构，将气路、油路、机械各部分集成于一体，在软件作用下，通过电气电路，控制油雾的产生，保证油雾发生的流量，控制油雾室浓度的高低，控制取样流量的大小，并通过油雾浊度仪读取检测数据，完成试验过程的自动控制。     

BL分析下的管制员差错本体建模研究

为分析识别空中交通管制任务中管制差错问题,结合BL(body loop,BL)压力产生模型研究管制员压力来源.提出领域本体的建模流程,确立推理模型的内部逻辑关系,构建管制差错领域本体模型.采用FaCT++推理机针对实际案例进行语义推理,从而识别管制差错类型,提出了基于本体的管制差错专家系统的系统框架.结果验证了构建推理模型的有效性和合理性.     

供热系统集约化运行的能耗监测及节能调节问题探讨

对我校供热系统的现状进行了分析；指出了锅炉热效率及能耗监控方面的不足，并针对锅炉热效率提高和二次网循环泵变频调节进行了节能分析计算；同时根据我校实际情况对循环泵设备配置及控制进行了分析，提出了要加强技术指标量化考核和能耗监测，提高效率、节能降耗，实现供热系统的科学化、集约化运行。     

基于计划到达时刻的四维航迹规划

为了加速空管自动化与智能化技术的应用与实施,提出了水平航迹与高度/速度剖面分阶段设计的四维航迹规划方法。基于动态时间规整与层次聚类方法实现历史雷达航迹聚类分析,完成水平航迹设计。建立速度剖面规划模型,通过航迹生成器与速度调整器交互协作,精细化控制进场时间,以满足计划到达时间要求。以上海浦东国际机场PINOT进场航班为例实施验证,结果表明,四维航迹规划方法可有效实现航班的计划到达时间,从而减少航班延误,提高终端空域运行效率。