基于 FACE 思想的软件通用运行环境设计

未来机载能力环境（FACE）思想由美国军方、工业界和学术界共同发起,它针对机载航空电子软件系统提出了一种新的业务模型和参考架构。通过制定参考架构核心元素间的接口标准以及定义基于共识的通用数据模型可以为软件模块的跨平台重用提供便利。本文通过分析 FACE 参考架构的核心思想,结合实现层面的具体考虑,提出了软件通用运行环境的设计方案,旨在硬件计算平台上进一步搭建一个软件计算平台,使得应用软件模块在能够正常运行的基础上尽可能地实现“一次开发,多次应用”。     

高空来流条件下航空发动机双旋流燃烧室点火特性数值模拟

为深入了解真实航空发动机燃烧室极端条件下点火性能，在自有CFD平台上对不同高空来流条件下典型航空发动机双旋流燃烧室点火过程进行了数值模拟。为保证模拟精度，对模型包括全部气膜冷却小孔在内的所有精细结构均进行了完全仿真，并完整再现了燃烧室内从燃油雾化到点火燃烧全过程。结果表明3种高空来流条件下单次点火均失败。点火过程显示高温燃气越过旋流杯中心向上回流区扩张是点火的关键时空区域，在此时补充点火可推动火焰顺利传播到整个主燃区。对8km和6km两种状态分别增加点火次数到3次和5次后最终点火成功，结果表明前者着火极限油气比约为0.057，后者为0.038~0.042。     

船用多级轴流压气机低工况扩稳优化研究—“航海专刊”

对某型船用九级轴流压气机，为了探讨减少可转导叶列数的可行性，并提升低工况喘振裕度，本文通过数值模拟方法研究通流布局优化对压气机低工况稳定性的影响。通过特性分析和详细流场分析，结论表明，一维关键参数选取对最佳可转导叶控制策略影响较大，本文优化部分级关键参数，不仅减少了可转导叶列数，而且提升了低转速下的喘振裕度，在75%转速下喘振裕度提升了2.27%，在70%转速下喘振裕度提升了3.3%。     

Robust extension of the simple sea-surface irradiance model to handle cloudy conditions for the global ocean using satellite remote sensing data

Sea-surface solar radiation (abbreviated as photosynthetically available radiation, PAR) in the visible wavelength (400–700 nm) is an essential parameter to estimate marine primary productivity and understanding phytoplankton dynamics, upper ocean physics and biogeochemical processes. Although many remote-sensing models were developed to estimate daily PAR (DPAR) from ocean colour data, these models often produce biases in the DPAR products under cloudy-sky and complex atmospheric conditions due to the lack of parameterization to deal with the cloud cover conditions and insufficient in-situ DPAR data. This study presents an Extended Sea-surface Solar Irradiance Model (ESSIM) for estimating DPAR over the global ocean. The ESSIM uses the direct and diffuse components from the Simple sea-surface Solar Irradiance Model (SSIM) along with a new parameter to handle cloudy conditions. The ESSIM produced DPAR products with greater accuracy under both clear and cloudy conditions. Its performance was tested on the time-series MODIS-Aqua images and compared with the concurrent in-situ data and the results from two global models. Results showed that the DPAR values produced by ESSIM agree with in-situ data better than the global models for all-sky conditions (with a mean relative error of 11.267 %; a root mean square error of 5.563 Em^?2day^?1; and a mean net bias of 2.917 Em^?2day^?1). The ESSIM performed slightly better than the SSIM for clear conditions and the Frouin's Operational Algorithm (FOA) for all-sky conditions. As the new parameterization accounts for cloudy conditions, the ESSIM produced more accurate results for cloud cover conditions across latitudes (up to 60°). The time-series Level-3 binned MODIS-Aqua data (global gridded) also demonstrated that the ESSIM improved the accuracy of DPAR products and produced spatially and temporally consistent DPAR products over the global ocean regardless of the seasons and sky conditions.     

航空发动机主轴轴承状态监测研究现状与发展趋势

航空发动机主轴轴承承受着高温、高速、重载、贫油、断油等极端工况,其疲劳、磨损等失效问题严重影响发动机的可靠性.因此,对航空发动机主轴轴承的使用状态进行有效精确监测极为重要.对航空发动机主轴轴承工况特点、主要失效模式和失效机制进行了梳理;针对主轴轴承的状态监测方法和技术,总结并对比分析了现有主轴轴承振动、滑油状态、声音、...     

共轴式直升机舰面起降风限图计算

通过建立共轴双旋翼直升机的舰面起降飞行动力学模型,计算了某型共轴双旋翼直升机在某型舰上的起降特性。根据相关判据,得出该机舰组合的起降风限图。起降风限图为该直升机在舰上的安全起降提供了指导,有重要的实际意义。