外螺纹中径测量不确定度的计算方法

以外螺纹中径测量为例，详细论述了标准不确定度和展伸不确定度的建模过程，并给出了计算实例，使外螺纹中径测量精度的评定符合国际规范。     

火工作动装置设计参数的敏感性分析

文章用内弹道理论建立火工作动装置的性能仿真模型，并对输出性能进行预计和分析，找出了影响输出性能的主要设计参数，并提出膨胀比的概念，用来快速判断设计的优劣。     

TiAlN 涂层钻头钻削钛合金的实验研究

采用Ti Al N涂层硬质合金麻花钻对钛合金(TC4)进行钻削试验,研究了切削用量对轴向力、加工孔壁表面粗糙度和切屑形态的影响。结果表明:轴向力随着进给量的增加而增加,轴向力随着转速的增加而减小。运用指数公式模型对轴向力实验结果进行回归分析,得到轴向力与转速以及进给量之间的关系式,并对该方程进行了检验验证误差均小于7%;随着进给量的增加断屑能力逐渐增加,切屑长度逐渐变短。在低转速和进给量为50 mm/min时切屑形态为短螺旋形切屑,此时排屑和孔壁粗糙度均为最佳。     

Motion prediction of a non-cooperative space target

Capturing a non-cooperative space target is a tremendously challenging research topic. Effective acquisition of motion information of the space target is the premise to realize target capture. In this paper, motion prediction of a free-floating non-cooperative target in space is studied and a motion prediction algorithm is proposed. In order to predict the motion of the free-floating non-cooperative target, dynamic parameters of the target must be firstly identified (estimated), such as inertia, angular momentum and kinetic energy and so on; then the predicted motion of the target can be acquired by substituting these identified parameters into the Euler’s equations of the target. Accurate prediction needs precise identification. This paper presents an effective method to identify these dynamic parameters of a free-floating non-cooperative target. This method is based on two steps, (1) the rough estimation of the parameters is computed using the motion observation data to the target, and (2) the best estimation of the parameters is found by an optimization method. In the optimization problem, the objective function is based on the difference between the observed and the predicted motion, and the interior-point method (IPM) is chosen as the optimization algorithm, which starts at the rough estimate obtained in the first step and finds a global minimum to the objective function with the guidance of objective function’s gradient. So the speed of IPM searching for the global minimum is fast, and an accurate identification can be obtained in time. The numerical results show that the proposed motion prediction algorithm is able to predict the motion of the target.     

基于响应曲面的时效成形材料参数修正

为了提高时效成形中回弹现象的有限元仿真精度,使用均匀试验设计结合响应曲面设计的方法,建立了仿真误差对于材料参数的响应函数,求解出材料参数的修正解。以此法得到的仿真结果与试验结果相吻合。     

不锈钢、钛合金导管高频钎焊工艺方法的改进

高频钎焊焊接方法在国内外进行研究的院校和公司相对较少，是一项较新的钎焊方法。国外在此项焊接工艺的研究和应用走在世界的前列。国内一直处于不断摸索和改进的过程中，焊接过程始终存在一些问题。通过本课题技术研究和相关的试验，详细地介绍了高频钎焊设备、工艺方法和高频钎焊工艺参数确定等方面的应用。     

沉淀硬化不锈钢的应用工艺探讨

阐述了沉淀硬化不锈钢（ＺＧｏＣｒ１６Ｎｉ４ＮｂＣｕ３）在铸造、热处理、无损探伤过程中易出现的问题及解决方法。     

FUZZY IDENTIFICATION METHOD BASED ON A NEW OBJECTIVE FUNCTION

Many fuzzy models on modeling and controlmethods have been developed since Takagi-Sugeno model was proposed[1] .The main prob-lems of the fuzzy identifying method based on T-S model appear in the following two aspects:　　 1 It is important what heuristic knowledgeis chosen to acquire the premise structure of theT- S model.This problem is related to the opti-mal partition of input space of premise part andmodeling accuracy.　　 2 Itis crucial whatidentifying method is u-tilized to estimate …     

Unsteady oscillation of a deformable airfoil section in incompressible flow

The unsteady aerodynamic loads (pressure increment and generalized forces) acting on a deformable thin airfoil section are determined for its arbitrary motion in the incompressible flow with transverse gusts. In this case, the exact Küssner solution in series is used for harmonic oscillation of an airfoil, in which the Theodorsen function is approximated by a sum of fractional functions with poles. In the time domain, these functions are replaced by the unknown functions that satisfy the one-type ordinary first order differential equations. The equations obtained are combined with the differential equations of the airfoil motion in the generalized coordinates and are used for analyzing the aeroelastic system stability and calculating its dynamic response to gust loads.     

基于复杂网络的航空制造供应链关键节点识别研究

随着不稳定因素的增加以及航空制造供应链的参与主体增多，航空制造供应链的管理所面临的风险也随之增大。因此针对航空制造供应链网络的风险管理，以复杂网络为工具研究供应链网络中的关键节点识别问题，从而帮助航空供应链提升抗风险能力。通过分析我国航空制造供应链网络现状和特点，提出供应链形成机制并划分供应链层级，对航空制造供应链进行构建及指标界定，对度中心性、介数中心性、接近中心性三种经典中心性算法以及传统K-Shell 分解算法进行加权改进；结合熵值-TOPSIS 法提出一种针对加权网络的供应链关键节点识别算法——WKC 算法，通过构造网络来进行算例分析，验证该种算法的有效性。结果表明：本文提出的WKC 算法原理科学、计算复杂度较低，为航空制造等高端装备制造业供应链的风险管理提供了一定的参考。