风洞模型-支撑系统涡激振动测量与分析

以0.55m×0.4m低湍流航空声学风洞某模型及其支撑系统为研究对象,采用基于加速度传感器直接测量支撑系统和热线间接测量模型尾流相结合的方法,测量并分析了风洞模型-支撑系统的涡激振动模态,给出了测量方案和数据处理方法。采用基于加速度传感器的功率谱分析方法,获得了模型-支撑系统的三阶振动频率分别为31.1、120.9和221.4Hz;采用基于加速度传感器的频域滤波和频域积分方法,提高了有效信号的信噪比,获得了模型-支撑系统振动的振型和振动节点位置;采用热线测量模型尾流分离涡脱落频率的方法,获得了模型一阶和二阶振动的尾流涡激频率分别为31.1和124.1 Hz,并从测量尾流速度脉动量获得了模型振幅变化和抖振边界信息。实验结果表明,采用热线测量模型尾流从而分析模型振动的方法,有利于小尺度的模型振动测量,而且相对于加速度传感器装于模型表面的直接测量方法而言,对试验模型的绕流流场干扰较小,为测量风洞试验模型的涡激振动模态提供了一种方法。     

基于贝叶斯模型平均的航空发动机可靠性分析

针对不同失效模式的特点,利用航空发动机状态监测信息,分别采用Gamma过程、Wiener过程和Weibull分布建立可靠性分析模型.采用贝叶斯模型平均（BMA）方法,分析不同失效模式对可靠性影响,对航空发动机可靠性进行集成分析.通过算例跟踪某在翼航空发动机可靠性水平,基于贝叶斯模型平均的航空发动机可靠性模型的计算误差率低于单一可靠性分析模型,计算结果误差率低于1%.说明多模型集成可靠性技术在复杂系统运行可靠性分析中的有效性和准确性.      

基于视频数据的机场跑道外来物检测

提出了一种基于视频数据的机场跑道外来物(FOD,Foreign Object Debris)检测算法,该算法包括几何校正、背景差分、杂波抑制和伪装消除等4个步骤.其中,几何校正排除了摄像头轻微抖动造成的图像差异;背景差分利用每个像素对应的颜色向量信息,建立背景模型并进行定时更新;杂波抑制和伪装消除利用差分图像和原始图像信息,建立马尔科夫随机场和概率统计模型,在降低虚警的同时提高了检测率.将本算法应用于两组不同光照条件下获取的视频图像,检测不同形状和颜色的FOD目标;采用本算法对机场实测数据进行测试,验证了算法的有效性.     

压电自适应桁架结构主动控制模型及实验

为提高结构对外部环境的抗干扰能力,构造了压电柔性自适应桁架结构,并对其主动控制进行了研究.由传感器、作动器与柔性梁组成压电自适应桁架结构.基于自适应结构的机电耦合理论,在测量位移的情况下,采用改进的二次积分力反馈控制方法研究了空间压电柔性自适应桁架结构的振动主动控制问题.建立了压电柔性自适应桁架结构主动控制实验系统,并对这类自适应结构进行了实时计算机振动主动控制实验研究.实验研究表明柔性自适应桁架结构能够改善结构的动力学特性,对外界的干扰具有良好的自适应性.     

挠性航天器的鲁棒多目标姿态控制器设计

航天器挠性附件的振动难以直接测量且对航天器的姿态控制精度产生不利影响。为解决这一问题,提出一种基于观测器的鲁棒多目标姿态控制系统设计方法,借助特征结构配置的参数化方法,给出了含有自由参向量的控制器以及观测器的完整参数化形式。通过对自由参向量的多目标优化选取,使控制系统具有良好的鲁棒性和干扰抑制能力,并避免了控制输出饱和现象的发生。对一个挠性航天器的设计实例表明了方法的有效性。
     

LEVEL DECISION-MAKING FOR AERO-ENGINE MODULES BASED ON INCREMENTAL KNOWLEDGE LEARNING

The maintenance of an aero-engine usually includes three levels, and the maintenance cost and period greatly differ depending on the different maintenance levels. To plan a reasonable maintenance budget program, airlines would like to predict the maintenance level of aero-engine before repairing in terms of performance parame- ters, which can provide more economic benefits. The maintenance level decision rules are mined using the histori- cal maintenance data of a civil aero-engine based on the rough set theory, and a variety of possible models of upda- ting rules produced by newly increased maintenance cases added to the historical maintenance case database are in- vestigated by the means of incremental machine learning. The continuously updated rules can provide reasonable guidance suggestions for engineers and decision support for planning a maintenance budget program before repai- ring. The results of an example show that the decision rules become more typical and robust, and they are more accurate to predict the maintenance level of an aero-engine module as the maintenance data increase, which illus- trates the feasibility of the represented method.     

星载三通道SAR/DPCA误差分析与动目标定位方法

针对一发三收模式下星载SAR-GMTI系统利用相位中心偏置天线（DPCA）方法进行杂波抑制时,系统误差和平台运动误差引起的杂波残留问题,提出了一种基于误差补偿的运动目标检测和定位新方法。分析了误差存在的原因,并以消除剩余杂波为目的详细推导出了相应的补偿因子,在此基础上对经过误差补偿后的数据采用DPCA方法进行杂波抑制,最后通过相位干涉处理进行动目标定位。仿真结果验证了算法的有效性。     

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

The method of reliability is proposed for the investigation of thermal contact conductance (TCC) in this study. A new definition is introduced, namely reliability thermal contact conductance (RTCC), which is defined as the TCC value that meets the reliability design requirement of the structural materials under consideration. An experimental apparatus with the compensation heater to test the TCC is introduced here. A practical engineering example is utilized to demonstrate the applicability of the proposed approach. By using a statistical regression model along with experimental data obtained from the interfaces of the structural materials GH4169 and K417 used in aero-engine, the estimate values and the confidence level of TCC and RTCC values are studied and compared. The results show that the testing values of TCC increase with interface pressure and the proposed RTCC model matches the test results better at high interface pressure.     

行星齿轮非线性振动系统参数稳定域的计算方法

研究了行星齿轮非线性传动系统参数稳定域计算的一般方法.该方法通过选取合理的失稳阀值,根据考查参数域内系统的运动状态选取合适的数值积分时间段,以循环套嵌的手段计算考查参数在各自范围内不同组合下的系统位移响应最大值,比较失稳阀值以判稳,参数稳定域的图形输出等5个步骤完成对行星轮系参数稳定域的计算.最后,以四自由度行星轮系纯扭转非线性振动模型为例,以行星轮输入转速、系统的齿侧间隙以及齿轮副的啮合阻尼系数为考查参数,分别计算得到了系统的单参数稳定域、双参数稳定域以及三参数稳定域,为行星轮系的设计取值提供了重要参考.      

Modeling and Optimal Design of 3 Degrees of Freedom Helmholtz Resonator in Hydraulic System

Three degrees of freedom (3-DOF) Helmholtz resonator which consists of three cylindrical necks and cavities connected in series (neck-cavity-neck-cavity-neck-cavity) is suitable to reduce flow pulsation in hydraulic system. A novel lumped parameter model (LPM) of 3-DOF Helmholtz resonator in hydraulic system is developed which considers the viscous friction loss of hydraulic fluid in the necks. Applying the Newton’s second law of motion to the equivalent mechanical model of the resonator, closed-form expression of transmission loss and resonance frequency is presented. Based on the LPM, an optimal design method which employs rotate vector optimization method (RVOM) is proposed. The purpose of the optimal design is to search the resonator’s unknown parameters so that its resonance frequencies can coincide with the pump-induced flow pulsation harmonics respectively. The optimal design method is realized to design 3-DOF Helmholtz resonator for a certain type of aviation piston pump hydraulic system. The optimization result shows the feasibility of this method, and the simulation under optimum parameters reveals that the LPM can get the same precision as transfer matrix method (TMM).