飞机选型的模糊评判

本文把模糊数学的模糊变换原理用于购买新机型的评判。给出了各评判指标的定义和隶属度:并按 Saatz 的二元对比标度确定各指标的重要度;以及模糊变换的计算方法和应用举例。     

关于矩阵的定义及其运算的新思路

在当前流行的线性代数教科书中,大都直接给出矩阵及其运算的抽象定义,并没有给出这些定义的实际背景和具体应用,使学生理解和接受起来有很大的困难。本文通过具体实例引出矩阵及其运算的概念,这不但使学生很自然地理解矩阵及其运算的定义,而且也加强了学生解决实际问题的能力。     

Bush有限单元原理及其在航天器结构建模中的应用

利用大量的数值计算确定了MSC.NASTRAN软件中广义弹簧单元（Bush）刚度阵的解析表达式,通过对比Bush元与剪切梁元的刚度阵,推导了Bush元参数与剪切梁刚度参数的对应关系,并利用展开状态的太阳翼结构和大型桁架结构的静力和动力分析验证了推导结果。该研究揭示了Bush有限单元的原理和所有输入参数的物理含义,有助于Bush元在结构有限元分析中的准确使用。     

FAST FEATURE RANKING AND ITS APPLICATION TO FACE RECOGNITION

A fast feature ranking algorithm for classification in the presence of high dimensionahty and small sample size is proposed. The basic idea is that the important features force the data points of the same class to maintain their intrinsic neighbor relations, whereas neighboring points of different classes are no longer to stick to one an- other. Applying this assumption, an optimization problem weighting each feature is derived. The algorithm does not involve the dense matrix eigen-decomposition which can be computationally expensive in time. Extensive exper- iments are conducted to validate the significance of selected features using the Yale, Extended YaleB and PIE data- sets. The thorough evaluation shows that, using one-nearest neighbor classifier, the recognition rates using 100-- 500 leading features selected by the algorithm distinctively outperform those with features selected by the baseline feature selection algorithms, while using support vector machine features selected by the algorithm show less prominent improvement. Moreover, the experiments demonstrate that the proposed algorithm is particularly effi- cient for multi-class face recognition problem.     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

共熔法制备超高温陶瓷基复合材料

首次采用共熔法制备超高温陶瓷基复合材料,三个样品初始组分分别为ZrB_2与鳞片石墨,ZrB_2、TaB_2、SiC及鳞片石墨,ZrB_2、MoSi_2与鳞片石墨。研究结果表明,共熔法制备的复合材料中各相分散均匀,产物中的石墨高度有序,石墨层间距分别为0.335 4、0.335 9与0.337 7 nm,且三者的微晶厚度分别为63.4、51.5及68.7 nm,拉曼光谱结果表明硼已经掺杂进入了石墨的网格结构。所制得的超高温陶瓷基复合材料样品中均存在一定的孔隙率,且制备的超高温陶瓷基复合材料的热导率较低。该方法为一种新型、快速、一步法制备超高温陶瓷基复合材料工艺。     

Young不等式、Holder不等式与Minkowski不等式的新证法

本文给出著名的Young不等式,H(?)lder不等式与Minkowski不等式的新证法。在通常的书上都利用Young不等式来证H(?)lder不等式,再用H(?)lder不等式来证Minkowski不等式。而在本文中用凸函数的特性证明上述三个不等式。     

基于模糊聚类分析的步枪作战效能评估

为了评估步枪的战术效能,科学地构建步枪作战效能评估体系,运用模糊聚类分析方法对步枪作战效能进行评估,最后通过算例验证了所建模型是合理、可行的。     

Integration and calibration of a multi slit spectropolarimeter

Multi-slit spectropolarimeter is a next-generation spectropolarimeter to obtain vector magnetic field information at high spatial, spectral, and temporal resolution for studying the magnetic structures on the Sun. Once developed, it can be used as ground based instrument at solar observatories, also as a space payload for various solar missions. A high spectral resolution is invariably an important parameter for accurate vector magnetic field measurements and faster cadence is required for the study of dynamical evolution of structures (e.g., solar flares, sunspots etc.) on the Sun and hence better understanding on the physics behind their evolution.     

Corrosion Inhibition of SiC_p/5A06 Aluminum Metal Matrix Composite by Cerium Conversion Treatment

This article studies the effects of the CeCl₃ concentrations in conversion solutions with and without addition of NaCl, pH-values of conversion solution, drying temperature, time and temperature of immersion on the Ce-conversion coatings for corrosion protection of the SiC_p/5A06 Al-MMC and 5A06 Al-alloy in the 3.5% NaCl aqueous solution at room temperature. Potentiodynamic polarization tests reveal that the Ce-conversion treatment could markedly improve the pitting corrosion resistance of the composite and the matrix alloy in chloride containing environment. The best corrosion resistance effects are obtained for the samples treatment in 1‰ CeCl₃·7H₂O/ 3.5% NaCl solution at 45 °C for 60 min, followed by drying at 100 °C for 30 min. Examinations by means of scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) indicate that this behavior is due to the precipitation of Ce-oxides/hydroxides on the cathodic intermetallics and the Al-oxide film on the rest of the metal matrix.